Tokelau Reef Polygons (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3595
12
Added
01 Dec 2014

This dataset was first added to LINZ Data Service on 01 Dec 2014.

A ridge, usually of rocks or coral, lying near the surface of the sea, which may be visible at low tide, but is usually covered with water

Data Dictionary for reef_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52155
Data type Vector polygon
Feature count 6
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Tokelau Lagoon Polygons (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3361
9
Added
01 Dec 2014

This dataset was first added to LINZ Data Service on 01 Dec 2014.

A sheet of salt water separated from the open sea by sand, shingle banks or a road embankment. The sheet of water between an offshore reef, esp. of coral, and mainland. The sheet of water within a ring or horseshoe shaped atoll.

Data Dictionary for lagoon_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52150
Data type Vector polygon
Feature count 1
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Tank Points (Topo, 1:25k, Zone4)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3751
7
Added
02 Dec 2014

This dataset was first added to LINZ Data Service on 02 Dec 2014.

A structure used for the storage of fluids

Data Dictionary for tank_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52279
Data type Vector point
Feature count 13
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Tokelau Wharf Edges (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3472
11
Added
04 Dec 2014

This dataset was first added to LINZ Data Service on 04 Dec 2014.

Any structure on a waterfront, designed to make it possible for vessels to lie alongside and take or unload cargo, passengers etc.

Data Dictionary for wharf_edge: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52166
Data type Vector linestring
Feature count 3
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Terrain Relief (Topo, 1:50k, Zone4)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3328
14
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52405
Data type Image/Raster
Resolution 10.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Terrain Relief (Topo, 1:50k, Zone3)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1212
29
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52404
Data type Image/Raster
Resolution 10.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Niue Terrain Relief (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1035
25
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52403
Data type Image/Raster
Resolution 10.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Terrain Relief (Topo, 1:25k, Zone4)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3427
18
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52402
Data type Image/Raster
Resolution 5.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Terrain Relief (Topo, 1:25k, Zone3)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3384
10
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52401
Data type Image/Raster
Resolution 5.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Tokelau Terrain Relief (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1076
14
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52400
Data type Image/Raster
Resolution 5.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 176