NZ Elevation Survey Index

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4125
214
Updated
15 Sep 2020

This dataset was last updated on LINZ Data Service on 15 Sep 2020.

The NZ Elevation Survey Index dataset provides an index to all LiDAR derived elevation datasets found on the LINZ Data Service. Each record in the dataset provides both a geometry of the extent of the elevation survey, as well as useful metadata attributes. The extents are derived from the maximum extent of DEM and DSM coverage and consist of full NZTopo50 1k tiles, even where a tile is only partially covered with data. These extents only provide a rough indication of corresponding point cloud coverage which can be quite different for some elevation surveys.

Please refer to the NZ Aerial Surveys Data Dictionary for detailed metadata and information about this dataset.

The elevation data referenced by this dataset is available on the LINZ Data Service.

Layer ID 104252
Data type Vector multipolygon
Feature count 35
Primary key elevation_survey_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Building Outlines

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

29465
7989
Updated
24 Aug 2020

This dataset was last updated on LINZ Data Service on 24 Aug 2020.

This dataset provides current outlines of buildings within mainland New Zealand captured from the latest aerial imagery.

A building outline is a 2D representation of the roof outline of a building which has been classified from LINZ aerial imagery using a combination of automated and manual processes to extract and refine a building roof outline.

Building outlines observed in aerial imagery larger than or equal to 10 square meters are captured in this dataset, and may include structures such as garages and large sheds.

Data vintage

This dataset shows the most recent set of building outlines extracted from the LINZ aerial imagery available on the LINZ Data Service.

Current coverage includes areas in Northland, Auckland, Waikato, Gisborne, Bay of Plenty, Hawke’s Bay, Taranaki, Manawatu-Whanganui, Wellington, Tasman, Nelson, West Coast, Marlborough, Canterbury, Southland, and Otago. This dataset will be updated and expanded as new aerial imagery becomes available.

Since aerial imagery is flown only every few years in each region of the country, building outlines only reflect those buildings observed at the date of this aerial imagery capture, and may not reflect buildings constructed after this time period.

Please refer to the NZ Building Outlines Data Dictionary for detailed metadata and information about this dataset.

Related building outlines data

NZ Building Outlines (All Sources) - contains all combinations of building outlines from multiple years of imagery that have existed since the beginning of this dataset, and the dates when each building outline existed in the associated aerial imagery.

NZ Building Outlines Lifecycle - is related to the dataset above and stores the relationship between building outlines when one building is split into two or more building outlines, or when multiple building outlines are merged into a single outline.


APIs and web services
This dataset is available via ArcGIS Online and ArcGIS REST services, as well as our standard APIs.
LDS APIs and OGC web services
ArcGIS Online map services
ArcGIS REST API

Layer ID 101290
Data type Vector multipolygon
Feature count 3258578
Primary key building_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Building Outlines (All Sources)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8706
1005
Updated
24 Aug 2020

This dataset was last updated on LINZ Data Service on 24 Aug 2020.

This dataset provides building outlines within mainland New Zealand extracted from multiple years of aerial imagery, allowing you to see change over time, or restrict the dataset to building outlines that match a specific aerial imagery source.

A building outline is a 2D representation of the roof outline of a building which has been classified from LINZ aerial imagery using a combination of automated and manual processes to extract and refine a building roof outline.

Building roof outlines observed in aerial imagery larger than or equal to 10 square meters are captured in this dataset, and may include structures such as garages and large sheds.

Data vintage

This dataset contains all building outlines which have been extracted from multiple years of aerial imagery available in each region of the country, including the most recent imagery. This dataset includes the dates for which each building existed in the aerial imagery.

Coverage areas include Northland, Auckland, Waikato, Bay of Plenty, Gisborne, Hawke’s Bay, Taranaki, Manawatu-Whanganui, Wellington, Tasman, Nelson, West Coast, Marlborough, Canterbury, Southland and Otago. This dataset will be updated and expanded as new aerial imagery becomes available.

Please refer to the NZ Building Outlines Data Dictionary for detailed metadata and information about this dataset.

Related building outlines data

NZ Building Outlines Lifecycle – stores the relationship between building outlines when one building is split into two or more building outlines, or when multiple building outlines are merged into a single outline. Use this in conjunction with the NZ Building Outlines (All Sources) dataset.

NZ Building Outlines - provides current building outlines only, derived from the latest LINZ aerial imagery.

Layer ID 101292
Data type Vector multipolygon
Feature count 3454426
Primary key building_outline_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Trig Points (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4034
193
Updated
03 Aug 2020

This dataset was last updated on LINZ Data Service on 03 Aug 2020.

A structure on top of a hill, usually coloured black and white, used as a physical reference point by surveyors to determine location. The symbol shown on the map includes the elevation and trig identification code for beaconed trig stations.
These topographic trig points are derived from New Zealand geodetic marks data which can also be accessed through the LINZ Data Service: NZ Geodetic Marks and NZ Geodetic Vertical Marks.

Data Dictionary for trig_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 103476
Data type Vector point
Feature count 5791
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Contours (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6
131644
41407
Updated
03 Aug 2020

This dataset was last updated on LINZ Data Service on 03 Aug 2020.

An imaginary line that connects points of equal height value eg the elevation of the land surface above or below a vertical datum, in this case of LINZ topographic mapping, this is Mean Sea Level.

Data Dictionary for contour: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50768
Data type Vector linestring
Feature count 484179
Elevation Z (elevation)
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Topo50 Gridless Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

30089
4205
Updated
04 Aug 2020

This dataset was last updated on LINZ Data Service on 04 Aug 2020.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • Representation of a road or track does not necessarily indicate public right of access. For access rights, maps and other information, contact the New Zealand Walking Access Commission - www.walkingaccess.govt.nz

  • The Department of Conservation and other agencies should be contacted for the latest information on tracks and back country huts. Closed tracks are defined as being no longer maintained or passable and should not be used.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in forest and snow areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Layer ID 52343
Data type Image/Raster
Resolution 4.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Topo50 Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

177277
35341
Updated
04 Aug 2020

This dataset was last updated on LINZ Data Service on 04 Aug 2020.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • Representation of a road or track does not necessarily indicate public right of access. For access rights, maps and other information, contact the New Zealand Walking Access Commission - www.walkingaccess.govt.nz

  • The Department of Conservation and other agencies should be contacted for the latest information on tracks and back country huts. Closed tracks are defined as being no longer maintained or passable and should not be used.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in forest and snow areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Layer ID 50767
Data type Image/Raster
Resolution 4.233m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Wreck Points (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9854
698
Updated
03 Aug 2020

This dataset was last updated on LINZ Data Service on 03 Aug 2020.

A wrecked vessel, either submerged or visible which is attached to or foul of the bottom or cast up on the shore; or a greatly disabled or damaged vehicle

Data Dictionary for wreck_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50379
Data type Vector point
Feature count 51
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Windmill Points (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11863
902
Updated
03 Aug 2020

This dataset was last updated on LINZ Data Service on 03 Aug 2020.

A mill or other machine that runs on the energy generated by a wheel of adjustable blades or flats rotated by the wind

Data Dictionary for windmill_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50378
Data type Vector point
Feature count 802
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Wharf Edges (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11773
793
Updated
03 Aug 2020

This dataset was last updated on LINZ Data Service on 03 Aug 2020.

Any structure on a waterfront, designed to make it possible for vessels to lie alongside and take or unload cargo, passengers etc.

Data Dictionary for wharf_edge: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50377
Data type Vector linestring
Feature count 123
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 387