Antarctic Geodetic Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4189
69
Updated
09 Nov 2019

This dataset was last updated on LINZ Data Service on 09 Nov 2019.

This dataset provides information about the position, position accuracy, mark name, mark type, condition and unique four letter code for geodetic marks in terms of New Zealand's official geodetic datum for the Ross Dependency.

This dataset only includes marks that are within Antarctica. These positions have been generated using geodetic observations such as precise differential GPS or electronic distance and theodolite angles measurements. The positions are either 2D or 3D depending of the availability of this measurement data.

The source data is from Land Information New Zealand's (LINZ) Landonline system where it is used by Land Surveyors. This dataset is updated daily to reflect changes made in the Landonline.

Accuracy

Geodetic marks with a coordinate order of 5 or less have been positioned in terms of Ross Sea Region Geodetic Datum 2000 (RSRGD2000) using precise differential GPS techniques. Marks with order 6 have been positioned in terms of RSRGD2000 using precise horizontal angles and distance measurements. Lower order marks (order 7 and greater) are derived from lower accuracy measurement techniques or historical datum transformations, and may be significantly less accurate.

The accuracy of RSRGD2000 coordinates is described by a series of 'orders' classifications. Positions in terms of RSRGD2000 are described by three-dimensional coordinates (latitude, longitude, ellipsoidal height). The accuracy of a survey mark is indicated by its order. Orders are classifications based on the quality of the coordinate in relation to the datum and in relation to other surrounding marks. For more information see www.linz.govt.nz/geodetic/datums-projections-heigh...

Note that the accuracy applies at the time the mark was last surveyed. Refer to the web geodetic database for historical information about mark coordinates.

Note also that the existence of a mark in this dataset does not imply that there is currently a physical mark in the ground - the dataset includes destroyed or lost historical marks. The geodetic database provides more information on the mark status, valid at last time it was visited by LINZ.

Layer ID 50789
Data type Vector point
Feature count 468
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Control Networks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10437
1137
Updated
09 Nov 2019

This dataset was last updated on LINZ Data Service on 09 Nov 2019.

This dataset provides information about the survey control network, position, position accuracy, mark name, mark type, condition and unique four letter code for geodetic marks in terms of New Zealand's official geodetic datum, New Zealand Geodetic Datum 2000 (NZGD2000).

The dataset only contains marks that are within the New Zealand mainland and offshore islands. These positions have been generated using geodetic observations such as precise differential GPS or electronic distance and theodolite angle measurements. The positions are either 2D or 3D depending of the availability of this measurement data.

The source data is from Land Information New Zealand's (LINZ) Landonline system where it is used by Land Surveyors. This dataset is updated daily to reflect changes made in the Landonline.

The mark network is segmented into six control networks which provide control marks for specific purposes. The control_network field within this layer records this network with the 3 or 4 letter abbreviation code as follows:

NRF - National Reference Frame NDMN - National Deformation Monitoring Network RDMN - Regional Deformation Monitoring Network LDMN - Local Deformation Monitoring Network CHN - Cadastral Horizontal Control Network CVN - Cadastral Vertical Control Network BGN - Basic Geospatial Network NHN - National Height Network

Note a geodetic mark can be in more than network. Also not all geodetic marks are currently associated with a geodetic network. Those that are may be referred to as a control mark. For more information about the control networks refer to www.linz.govt.nz/geodetic/geodetic-programme/surve....

Accuracy

Geodetic marks with a coordinate order of 5 or less have been positioned in terms of NZGD2000. Lower order marks (order 6 and greater) are derived from cadastral surveys, lower accuracy measurement techniques or inaccurate historical datum transformations, and may be significantly less accurate.

The accuracy of NZGD2000 coordinates is described by a series of 'orders' classifications. Positions in terms of NZGD2000 are described by three-dimensional coordinates (latitude, longitude, ellipsoidal height). The accuracy of a survey mark is indicated by its order. Orders are classifications based on the quality of the coordinate in relation to the datum and in relation to other surrounding marks. For more information see www.linz.govt.nz/geodetic/datums-projections-heigh...

Note that the accuracy applies at the time the mark was last surveyed. Refer to the web geodetic database for historical information about mark coordinates.

Note also that the existence of a mark in this dataset does not imply that there is currently a physical mark in the ground - the dataset includes destroyed or lost historical marks. The geodetic database provides more information on the mark status, valid at last time it was visited by LINZ or a maintenance contractor.

Layer ID 50786
Data type Vector point
Feature count 116155
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Antarctic Geodetic Vertical Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3784
47
Updated
09 Nov 2019

This dataset was last updated on LINZ Data Service on 09 Nov 2019.

This dataset provides information about the position, height, height datum, height accuracy, mark name, mark type, condition and unique four letter identifier for geodetic marks that have an authoritative height in terms of a vertical datum.
Heights are in datums defined at www.linz.govt.nz/geodetic/datums-projections-heigh....

All marks will have positions in terms of New Zealand’s official geodetic datum for Antarctica, Ross Sea Region Geodetic Datum 2000 (RSRGD2000). The horizontal positions of marks are provided for approximate location purposes only.

This dataset only includes marks that are within the Antarctic region. The height data for these marks have been generated primarily using precise vertical angle and slope distance measurements from datum tide gauges. Some have been generated from levelling data.

The source data is from Land Information New Zealand's (LINZ) Landonline system where it is used by Land Surveyors. This dataset is updated daily to reflect changes made in the Landonline.

Accuracy

The accuracy of normal-orthometric heights are described by height orders.

For more information see www.linz.govt.nz/geodetic/datums-projections-heigh....

Note the accuracy applies at the time the mark was last surveyed - see the geodetic database for historical information about height coordinates.

Layer ID 50788
Data type Vector point
Feature count 279
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 61 to 63 of 63