Dunedin 1958 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6142
55
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The DUN58-NZVD2016 grid enables the conversion of normal-orthometric heights from the Dunedin 1958 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

DUN58-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Dunedin 1958 vertical datum (168.4° E to 171.3° E, 43.9° S to 46.5° S).

The height conversion grid models the difference between the Dunedin 1958 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of DUN58-NZVD2016 is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53428
Data type Vector point
Feature count 6952
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Antarctic Geodetic Vertical Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6308
48
Updated
19 Sep 2020

This dataset was last updated on LINZ Data Service on 19 Sep 2020.

This dataset provides information about the position, height, height datum, height accuracy, mark name, mark type, condition and unique four letter identifier for geodetic marks that have an authoritative height in terms of a vertical datum.
Heights are in datums defined at www.linz.govt.nz/geodetic/datums-projections-heigh....

All marks will have positions in terms of New Zealand’s official geodetic datum for Antarctica, Ross Sea Region Geodetic Datum 2000 (RSRGD2000). The horizontal positions of marks are provided for approximate location purposes only.

This dataset only includes marks that are within the Antarctic region. The height data for these marks have been generated primarily using precise vertical angle and slope distance measurements from datum tide gauges. Some have been generated from levelling data.

The source data is from Land Information New Zealand's (LINZ) Landonline system where it is used by Land Surveyors. This dataset is updated daily to reflect changes made in the Landonline.

Accuracy

The accuracy of normal-orthometric heights are described by height orders.

For more information see www.linz.govt.nz/geodetic/datums-projections-heigh....

Note the accuracy applies at the time the mark was last surveyed - see the geodetic database for historical information about height coordinates.

Layer ID 50788
Data type Vector point
Feature count 279
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Wellington 1953 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6915
81
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The WGN53-NZVD2016 grid enables the conversion of normal-orthometric heights from the Wellington 1953 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

WGN53-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Wellington 1953 vertical datum (174.4° E to 176.4° E, 39.1° S to 41.6° S).

The height conversion grid models the difference between the Wellington 1953 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of WGN53-NZVD2016 is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53446
Data type Vector point
Feature count 4636
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Quasigeoid 2016

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9289
354
Updated
21 Jul 2016

This dataset was last updated on LINZ Data Service on 21 Jul 2016.

The relationship between the GRS80 ellipsoid and the New Zealand Vertical Datum 2016 (NZVD2016) is modelled by the New Zealand Quasigeoid 2016 (NZGeoid2016). The relationship value is represented by the attribute “N”, in metres.

This relationship and NZVD2016 is formally defined in the LINZ standard LINZS25009.

NZGeoid2016 can be used to convert New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights to NZVD2016 normal-orthometric heights.

The conversion value is represented by the attribute “N”, in metres.

NZGeoid2016 is published on a one arc-minute grid (approximately 1.8 kilometres) over the New Zealand continental shelf (160° E to 170° W, 25° S to 60° S).

NZGeoid2016 was calculated by enhancing the EIGEN-6C4 global gravity model with, terrestrial, ship-track, satellite and airborne gravity data. GPS-levelling observations were not used to compute NZGeoid2016.

Users may also be interested in transforming heights to any of the 13 historic local vertical datums used in New Zealand using the appropriate datum relationship grid displayed in the NZ Height Conversion Index.

More information on these transformations is available on the LINZ website.

Layer ID 53418
Data type Vector point
Feature count 3783901
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Government GNSS CORS

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10910
211
Updated
22 Aug 2019

This dataset was last updated on LINZ Data Service on 22 Aug 2019.

The NZGD2000 Government CORS provides the locations of GNSS Continuously Operating Reference Stations operated by GNS Science under the GeoNet project (www.geonet.org.nz). Coordinates are from the LINZ Geodetic Database, in NZGD2000.

These are split into several different networks:

  • PositioNZ - stations predominantly funded by LINZ, with some GeoNet funding. These provide a nationwide coverage of ~120km spacing. More info here
  • GeoNet - stations funded by the GeoNet project. These are located in areas of geophysical interest, usually on the East Coast of the North Island. More info here
  • SAGENZ - stations funded by the University of Otago, GNS Science, MIT, University of Colorado and UNAVCO. These Southern Alps Geodetic Experiment - New Zealand stations are generally semi-continuous sites.
  • Tide Gauge - stations co-located with tide gauges at major ports. Data is managed through the GeoNet project also.

30" RINEX data from all of these sites is available from the GeoNet website

Real Time data is available from all PositioNZ stations, and some GeoNet stations. For more information, see the PositioNZ-RT website

Layer ID 51029
Data type Vector point
Feature count 196
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Lyttelton 1937 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7303
119
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The LTN37-NZVD2016 grid enables the conversion of normal-orthometric heights from the Lyttelton 1937 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

LTN37-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Lyttelton 1937 vertical datum (168.53° E to 174.2° E, 41.3° S to 45.1° S).

The height conversion grid models the difference between the Lyttelton 1937 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of LTN37-NZVD2016 is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53432
Data type Vector point
Feature count 19665
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Canterbury Earthquake (14 Feb 2016) Geodetic Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8095
86
Updated
20 Jun 2016

This dataset was last updated on LINZ Data Service on 20 Jun 2016.

Coordinates computed from surveys undertaken after the 14 February 2016 Canterbury earthquake. These should be consistent with any observations made after this earthquake (neglecting any localised deformation such as that due to liquefaction).

For further information about this dataset, see the Canterbury earthquake information.

These coordinates are only provisional. Analysis is ongoing as further data is collected. Coordinates were calculated using SNAP v2.5.33. Stations were constrained using coordinates of distant PositioNZ continuous GNSS stations that were unaffected by the earthquake.

The standard deviations of coordinates are 0.01m horizontally and 0.02m vertically, relative to the PositioNZ network.

Coordinate changes due to the earthquake have been calculated by comparing pre and post-earthquake coordinates. Pre-earthquake coordinates were calculated relative to public and private continuous GNSS stations. These continuous GNSS stations had data processed for several days early in 2016 (before the earthquake). Other pre-earthquake geodetic data was then readjusted with the continuous GNSS data. Note that this means these coordinate changes may differ slightly from those that would be calculated by comparing the post-earthquake coordinates with those currently in the Geodetic Database.

These coordinates are suitable for use in surveys and other geospatial activities in Canterbury and Christchurch.

Layer ID 53322
Data type Vector point
Feature count 149
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Airborne Gravity Flight Lines at Elevation (2013-2014)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6562
58
Updated
30 Jan 2017

This dataset was last updated on LINZ Data Service on 30 Jan 2017.

Introduction
This dataset provides gravity observations, reductions and metadata for New Zealand’s national airborne gravity survey at flight elevation. A full description of each field in this dataset is available in the accompanying pdf NZ Airborne Gravity Flight Lines at Elevation (2013-2014) Description.

Description
New Zealand’s national airborne gravity dataset is comprised of more than 50,000 linear km of flight observations, covering the three main islands of New Zealand and up to 10km offshore.

Gravity observations can be used to compute gravity anomalies: differences between measured gravity and an ellipsoidal model of the Earth’s gravity field. Gravity anomalies correspond to un-modelled density variations within the Earth’s crust and upper mantle. They are used to investigate concealed geological structures and for quasigeoid modelling.

The national airborne gravity dataset was collected as a joint project between Land Information New Zealand (LINZ), GNS Science (GNS) and Victoria University of Wellington (VUW). The airborne survey was completed in a total of eight months, over two campaigns: August – October 2013, and February – June 2014.

Users may also be interested raster layers created for each of the free-Air and Bouguer Anomalies which have been downward continued to ground surface NZ Airborne Gravity Free-Air Anomalies at Ground Surface (2013-2014) and NZ Airborne Gravity Bouguer Anomalies at Ground Surface (2013-2014).

Layer ID 53531
Data type Vector point
Feature count 947685
Elevation Z (Ellipsoidal_Height)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

One Tree Point 1964 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7028
43
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The OTP64-NZVD2016 grid enables the conversion of normal-orthometric heights from the One Tree Point 1964 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

OTP64-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the One Tree Point 1964 vertical datum (171.3° E to 174.4° E, 40.4° S to 42.7° S).

The height conversion grid models the difference between the One Tree Point 1964 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of OTP64-NZVD2016 is better than 1 centimetre (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53440
Data type Vector point
Feature count 5548
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Taranaki 1970 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6451
32
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The TNK70-NZVD2016 grid enables the conversion of normal-orthometric heights from the Taranaki 1970 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

TNK70-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Taranaki 1970 vertical datum (173.6° E to 176.4° E, 38.3° S to 41.1° S).

The height conversion grid models the difference between the Taranaki 1970 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of TNK70-NZVD2016 is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53444
Data type Vector point
Feature count 7225
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 11 to 20 of 48