NZ Christchurch Post-EQ Survey-Accurate (SDC) Non-Boundary Coordinates

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4771
561
Added
22 Feb 2015

This dataset was first added to LINZ Data Service on 22 Feb 2015.

For further information about this dataset, see the Canterbury earthquake information.

Coordinates computed by adding the effects of deep-seated movement to survey points that had authoritative survey-accurate digital cadastre (SDC) coordinates immediately prior to 4 September 2010 (the first Canterbury earthquake). Marks that did not have SDC status at that time are not included in the dataset. Deep-seated movements were evaluated using the NZGD2000 deformation model.

  • The 'nod_id' column is the Landonline node id. This is the unique identifier for the mark.
  • The 'current_name' column is the Landonline mark name.
  • The 'east_mtpleatm2000' and 'north_mtpleatm2000' columns are the east and north coordinates (metres) in terms of the Mt Pleasant 2000 transverse mercator projection. Rounded to the nearest centimetre.
  • The 'coord_order' column is the Landonline coordinate order immediately prior to 4 September 2010.

The estimated absolute uncertainty of these coordinates is 0.09m at the 95% confidence level.

These coordinates are intended for the use of Licensed Cadastral Surveyors when locating boundaries in Christchurch, in accordance with the Rules for Cadastral Survey 2010 and associated guidance, particularly guidance relating to the earthquakes.

Layer ID 52349
Data type Vector point
Feature count 50181
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Christchurch Post-EQ Survey-Accurate (SDC) Boundary Coordinates

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4579
412
Added
22 Feb 2015

This dataset was first added to LINZ Data Service on 22 Feb 2015.

For further information about this dataset, see the Canterbury earthquake information.

Coordinates computed by adding the effects of deep-seated movement to survey points that had authoritative survey-accurate digital cadastre (SDC) coordinates immediately prior to 4 September 2010 (the first Canterbury earthquake). Marks that did not have SDC status at that time are not included in the dataset. Deep-seated movements were evaluated using the NZGD2000 deformation model.

  • The 'nod_id' column is the Landonline node id. This is the unique identifier for the mark.
  • The 'current_name' column is the Landonline mark name. Many boundary marks do not have a name recorded in this dataset, because this information has not been digitally captured.
  • The 'east_mtpleatm2000' and 'north_mtpleatm2000' columns are the east and north coordinates (metres) in terms of the Mt Pleasant 2000 transverse mercator projection. Rounded to the nearest centimetre.
  • The 'coord_order' column is the Landonline coordinate order immediately prior to 4 September 2010.

The estimated absolute uncertainty of these coordinates is 0.09m at the 95% confidence level.

These coordinates are intended for the use of Licensed Cadastral Surveyors when locating boundaries in Christchurch, in accordance with the Rules for Cadastral Survey 2010 and associated guidance, particularly guidance relating to the earthquakes.

Layer ID 52350
Data type Vector point
Feature count 415489
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Capture Areas (SCA)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5109
234
Added
22 Jul 2011

This dataset was first added to LINZ Data Service on 22 Jul 2011.

This layer provides cadastral Survey Capture Areas (SCA).

In conjunction with the implementation of Landonline in each region, LINZ undertook a project to "back-capture" existing parcel boundaries in the main centres of population and land development. It was intended to "back-capture" approximately 70 percent of existing parcels, which equates to about 20 percent of the land area of New Zealand.

The data capture known as "Populate Electronic Parcel" (PEP) was undertaken under contract by EDS.

The areas to be captured known as "Survey Capture Areas" (SCA) were defined in consultation with local LINZ staff, survey practitioners and Local Authorities.

Within the defined SCAs, the dimensions for surveyed right-lined boundaries of current parcels were captured from existing survey plans. In addition, sufficient traverses, boundary ties, and connections to the geodetic control were captured or surveyed to ensure adequate network geometry and strengthen areas where the boundary dimensions are unreliable. This survey network was adjusted to generate modern survey coordinates for all relevant nodes. Where the resulting boundaries comply with the accuracy requirements of the 1998 Survey Regulations, then the adjusted co-ordinates were declared to have SDC (Survey-accurate Digital Cadastre) status.

For more information see here

Layer ID 50840
Data type Vector multipolygon
Feature count 84
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Property Titles

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

262201
34460
Updated
12 Jan 2018

This dataset was last updated on LINZ Data Service on 12 Jan 2018.

This layer provides title information (excluding ownership) where there is a data link to one or more primary parcels.

A title is a record of all estates, encumbrances and easements that affect a piece of land. These are now known as Computer Registers incorporating Computer Freehold Registers, Composite Computer Registers, Computer Unit Title Registers and Computer Interest Registers.

This data set removes all ownership fields so that it can be freely distributed. If ownership information is required, the Title & Owners layer and Owners layer; enables this via more restrictive licensing.

An object has been constructed using the parcel shapes where a data link exists. However there can be multiple parcels associated with a title, and a title may only have a part share in a parcel. The constructed shape representing the title will therefore be an aggregation of all parcels that the title is associated with. The ‘spatial extents shared’ attribute when equal to ‘false’ will indicate that title has exclusive interest over all of the shape (this will be case for the vast majority).

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see

Layer ID 50804
Data type Vector multipolygon
Feature count 2213106 (incl. 2197 with empty or null geometries)
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Primary Parcels

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1
129907
43658
Updated
12 Jan 2018

This dataset was last updated on LINZ Data Service on 12 Jan 2018.

This layer provides the current primary parcel polygons and some associated descriptive data that details the appellation (legal description), purpose, size and a list of titles that have an interest in the parcel.

A primary parcel is a portion of land that is intended to be :
• owned by the Crown, except moveable marginal strips
• Held in fee simple ((predominately private ownership)
• Maori freehold land or Maori customary land
• Public foreshore and seabed
• The bed of a lake or river
• Road or Railway
• Vested in a local authority

Primary parcels can be thought of as the 'base level' of the 'jigsaw puzzle' of all land making up New Zealand. Other 'levels' are NZ Non-primary parcels that essentially limit the full rights that would normally be associated with a primary parcel for example easements, covenants, leases and moveable marginal strips etc.

If you require approved or historic parcels see the All Parcels Layer

This layer has a nominal accuracy of 0.1-1m in urban areas and 1-100m in rural areas. For more detailed information about parcel accuracies please refer to the Survey Boundary Marks layer which contains accuracies for each parcel node.

The combination of this layer with the non-primary parcels layer provides all current parcels for New Zealand (i.e. excludes Historic and Pending parcels)

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see

Layer ID 50772
Data type Vector multipolygon
Feature count 2548757
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Canterbury Earthquake Survey Mark Movements

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1204
42
Added
12 Sep 2016

This dataset was first added to LINZ Data Service on 12 Sep 2016.

This layer details the movement of survey marks due to the Canterbury Earthquake Sequence (CES). The movements include the impact of 5 major earthquakes on 4 September 2010, 22 February 2011, 13 June 2011, 23 December 2011 and 14 February 2016.

Note that these movements apply only at the survey mark. Nearby land may have moved differently, especially in areas impacted by substantial shallow ground movement.

For further earthquake information, see the Canterbury earthquake information on the LINZ website.

Scope

Movements do not include the regular tectonic movement (not related to earthquakes) of approximately 5cm per year.

As well as Christchurch, the data covers Lyttelton, Spencerville, Kaiapoi, Pines Beach, Woodend, Pegasus and Waikuku Beach.

Mark Movement Calculations

Observed mark movements have been calculated from geodetic and cadastral survey data collected at the same physical survey mark before and after the earthquakes. Various filters have been applied to ensure as far as practicable that the movements reflect real-world earthquake-related movements of marks. For example, only non-boundary marks that have been directly measured (rather than adopted) are included.

Modelled mark movements have been calculated using models of the tectonic-scale movements resulting from each earthquake, supplied by GNS Science, supplemented with more detailed modelling carried out by LINZ. These models typically represent deep-seated movement only. They do not include shallow movement, such as that resulting from liquefaction.

Therefore the difference between the post-earthquake observed and post-earthquake modelled position generally represents shallow ground movement. The difference between the post-earthquake modelled and pre-earthquake observed position generally represents deep-seated movement. The difference between the post-earthquake observed position and pre-earthquake observed position represents total movement due to the earthquakes.

Accuracy

The uncertainty of the coordinate changes is 0.1m at a 95% confidence interval.

Layer Attributes

  • nod_id_post_eq: Landonline node id for the latest post-earthquake node (mark)
  • code_post_eq: Geodetic code for the latest post-earthquake node
  • name_post_eq: Mark name for the latest post-earthquake node
  • nod_id_pre_eq: Landonline node id for the pre-earthquake node (mark)
  • code_pre_eq: Geodetic code for the pre-earthquake node
  • name_pre_eq: Mark name for the pre-earthquake node
  • de_mod_obs: East change from modelled post-earthquake to observed post-earthquake position
  • dn_mod_obs: North change from modelled post-earthquake to observed post-earthquake position
  • hz_mod_obs: Horizontal change from modelled post-earthquake to observed post-earthquake position
  • bg_mod_obs: Bearing from modelled post-earthquake to observed post-earthquake position
  • de_pre_mod: East change from observed pre-earthquake to modelled post-earthquake position
  • dn_pre_mod: North change from observed pre-earthquake to modelled post-earthquake position
  • hz_pre_mod: Horizontal change from observed pre-earthquake to modelled post-earthquake position
  • bg_pre_mod: Bearing from observed pre-earthquake to modelled post-earthquake position
  • de_pre_obs: East change from observed pre-earthquake to observed post-earthquake position
  • dn_pre_obs: North change from observed pre-earthquake to observed post-earthquake position
  • hz_pre_obs: Horizontal change from observed pre-earthquake to observed post-earthquake position
  • bg_pre_obs: Bearing from observed pre-earthquake to observed post-earthquake position
Layer ID 53455
Data type Vector point
Feature count 8882
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Parcels

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

48210
14374
Updated
12 Jan 2018

This dataset was last updated on LINZ Data Service on 12 Jan 2018.

This layer provides all cadastral parcel polygons and some associated descriptive data that details the appellation (legal description), purpose, size and a list of titles that have an interest in the parcel.

NOTE: This layer contains primary and non-primary approved, current or historic linear parcels (see status flag descriptions for more information).

In conjunction with the Linear Parcels, this layer provides the easiest way to create a relationship with associated tables such as Parcel Title Association List, Parcel Statutory Actions List and Survey Affected Parcels List.

This layer contains spatial and non-spatial (without geometry) parcels. The Landonline system which manages the data maintains non-spatial parcels for many different reasons. The non-spatial parcels can only be accessed via WFS or as a full layer file download. No layer clips can be used. The most common reasons for non-spatial parcels are:

  1. Flats and unit survey plans will create non-spatial parcels for referencing property rights. This is because the Landonline system has not yet been designed to support the spatial definition of these plans.

  2. Titles which were not linked to a spatial parcel during the Landonline title conversion project created non-spatial parcel references. As titles are spatially linked many of these non-spatial parcels will be made historic or will be merged with the associated spatial parcel.

Parcels within this layer contain the following status flags:

  • Approved: The definition of a survey-defined parcel that has been processed and authorised as correct in terms of the survey network.

  • Current: A parcels that has been registered or the parcel is made current by a statutory action against a Legalisation plan.

  • Survey Historic: A parcel that has been extinguished from the primary cadastral network but still exists in live Title estates.

  • Historic: A parcel that has been extinguished from the primary cadastral network and no longer exists in live Title estates or has an current recorded statutory action. Typically this happens when a parcel is subdivided or merged, and new titles or actions are registered against the replacing parcels. Note: Only parcel made historic since the beginning of Landonline operations (2002) are included.See this page for the actual dates when Landonline operations started.

Polygons within this layer have a nominal accuracy of 0.1-1m in urban areas and 1-100m in rural areas. For more detailed information about parcel accuracies please refer to the Survey Boundary Marks layer which contains accuracies for each parcel node.

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see.

Layer ID 51571
Data type Vector multipolygon
Feature count 4392963 (incl. 1047808 with empty or null geometries)
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Land Districts

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

31422
2016
Updated
12 Jan 2018

This dataset was last updated on LINZ Data Service on 12 Jan 2018.

This layer provides Land District shapes and their name.

A Land District is an administrative area that all titles and surveys were registered against prior to Landonline. It is required to uniquely identify survey and title records created prior to Landonline.

Layer ID 50785
Data type Vector multipolygon
Feature count 12
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Boundary Marks

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

28940
3428
Updated
12 Jan 2018

This dataset was last updated on LINZ Data Service on 12 Jan 2018.

This layer provides the latest captured boundary mark information that defines existing parcel boundaries and associated information such as the mark name.

A boundary mark is on a node which defines the boundaries of primary parcels or non primary parcels.

Not all boundary points have a physical monument (e.g. a peg) placed. In this case the boundary mark is recorded as “unmarked”

This dataset extends the Landonline stored data by including the network accuracy which is based upon its assigned Landonline order - refer LINZS25006 (www.linz.govt.nz/about-linz/news-publications-and-... ).

The accuracy provided relates to the accuracy of coordinates of the mark and has little relevance to the accuracy of the boundary in relation to other boundaries. For example, if the coordinates of the mark were used to locate it, a user would expect to find the existing mark within the nominal accuracy (distance) stated.

Layer ID 50774
Data type Vector point
Feature count 12146224
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Primary Land Parcels

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

30190
11412
Updated
12 Jan 2018

This dataset was last updated on LINZ Data Service on 12 Jan 2018.

This layer provides the current land parcel polygons with associated descriptive data and is provided for users that require a separation of road parcels and hydro parcels and thereby require the balance layer (i.e. the remaining primary parcels).

The combination of this layer with the road parcels and hydro parcels equates to the primary parcels layer which provides all current parcels for New Zealand (i.e. excludes historic and pending parcels).

This layer has a nominal accuracy of 0.1-1m in urban areas and 1-100m in rural areas. For more detailed information about parcel accuracies please refer to the Survey Boundary Marks layer which contains accuracies for each parcel node.

This set of three parcel layers ('road', 'hydro' and 'land') tables easy access to the most common groupings of parcel intents.

If you require approved or historic parcels see the All Parcels Layer

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see

Layer ID 50823
Data type Vector multipolygon
Feature count 2230445
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 33