NZ Parcel Statutory Actions List

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6357
849
Updated
16 Nov 2019

This dataset was last updated on LINZ Data Service on 16 Nov 2019.

A Statutory Action is an action recorded against a parcel that is authorised by a specific Part or Section of an Act.

This table provides information about the current and historic statutory actions as recorded against specific parcels.

Note: Historic actions are only available in this dataset since the beginning of Landonline operations (about 2000). This page on LINZ's historic property databases provides actual dates when Landonline operations started.

This table has direct relationships with and can be linked to spatial parcel layers such as NZ Parcels, NZ Linear Parcels or NZ Primary Parcels.

For more information about this table, other property datasets, and how to relate them to each other, refer to the Property Boundary and Ownership Data Dictionary.

Table ID 51565
Data type Table
Row count 293174
Primary key id
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Capture Areas (SCA)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8650
392
Added
22 Jul 2011

This dataset was first added to LINZ Data Service on 22 Jul 2011.

This layer provides cadastral Survey Capture Areas (SCA).

In conjunction with the implementation of Landonline in each region, LINZ undertook a project to "back-capture" existing parcel boundaries in the main centres of population and land development. It was intended to "back-capture" approximately 70 percent of existing parcels, which equates to about 20 percent of the land area of New Zealand.

The data capture known as "Populate Electronic Parcel" (PEP) was undertaken under contract by EDS.

The areas to be captured known as "Survey Capture Areas" (SCA) were defined in consultation with local LINZ staff, survey practitioners and Local Authorities.

Within the defined SCAs, the dimensions for surveyed right-lined boundaries of current parcels were captured from existing survey plans. In addition, sufficient traverses, boundary ties, and connections to the geodetic control were captured or surveyed to ensure adequate network geometry and strengthen areas where the boundary dimensions are unreliable. This survey network was adjusted to generate modern survey coordinates for all relevant nodes. Where the resulting boundaries comply with the accuracy requirements of the 1998 Survey Regulations, then the adjusted co-ordinates were declared to have SDC (Survey-accurate Digital Cadastre) status.

For more information see here

Layer ID 50840
Data type Vector multipolygon
Feature count 84
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ SPI Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5373
82
Updated
16 Nov 2019

This dataset was last updated on LINZ Data Service on 16 Nov 2019.

This layer provides the extents of the data incorporated into an adjustment which has been completed as part of the Spatial Parcel Improvement (SPI) project. The SPI project aims to improve the accuracy of digital cadastral data in areas (primarily rural) where survey-accurate data does not currently exist. The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be at least several metres, as the SPI project targets areas where significant movements are expected.

Layer ID 50835
Data type Vector polygon
Feature count 394
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ WACA Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5415
72
Updated
16 Nov 2019

This dataset was last updated on LINZ Data Service on 16 Nov 2019.

This layer provides the extents of the data incorporated into an adjustment which has been completed as a Wide Area Cadastral Adjustment (WACA). These adjustments are undertaken in areas where there is already substantial survey-accurate data, but there are some inconsistencies in the data resulting from small changes to geodetic control coordinates and/or the progressive submission of additional Cadastral Survey Datasets (CSDs). The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be no more than 10cm, as the WACAs target areas where coordinates already have fairly high spatial accuracy.

Layer ID 50836
Data type Vector polygon
Feature count 228
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Boundary Vectors

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

29200
6296
Updated
16 Nov 2019

This dataset was last updated on LINZ Data Service on 16 Nov 2019.

This layer provides the latest bearing (direction) and/or distance for cadastral boundaries.

When a cadastral survey is undertaken the relationship between boundary and non-boundary marks is ascertained or measured.
• This commonly is in the form or a vector (bearing and distance), but occasionally just one component.
• Some relationships are defined as arcs. In this data layer, the arc length is recorded in the distance field and a separate record holds the chord.

Only observations that have been captured in Landonline are available. This includes vectors that were re-captured in the Survey Capture Areas from survey plans lodged prior to Landonline and all survey observations since.

Layer ID 50820
Data type Vector linestring
Feature count 8734335
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Primary Land Parcels

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

50822
18049
Updated
16 Nov 2019

This dataset was last updated on LINZ Data Service on 16 Nov 2019.

This layer provides the current land parcel polygons with associated descriptive data and is provided for users that require a separation of road parcels and hydro parcels and thereby require the balance layer (i.e. the remaining primary parcels).

The combination of this layer with the road parcels and hydro parcels equates to the primary parcels layer which provides all current parcels for New Zealand (i.e. excludes historic and pending parcels).

This layer has a nominal accuracy of 0.1-1m in urban areas and 1-100m in rural areas. For more detailed information about parcel accuracies please refer to the Survey Boundary Marks layer which contains accuracies for each parcel node.

This set of three parcel layers ('road', 'hydro' and 'land') tables easy access to the most common groupings of parcel intents.

If you require approved or historic parcels see the All Parcels Layer

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see

Layer ID 50823
Data type Vector multipolygon
Feature count 2269252
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Property Titles

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

484990
61918
Updated
16 Nov 2019

This dataset was last updated on LINZ Data Service on 16 Nov 2019.

This dataset provides title information (excluding ownership) where there is a relationship to one or more primary parcels.

A Record of Title is a record of a property's owners, legal description and the rights and responsibilities registered against the title.

This dataset does not contain any ownership information so that it can be freely distributed. If ownership information is required, see the NZ Property Title Including Owners and NZ Property Title Owners datasets. Note: these are restricted access datasets and require you to agree to the LINZ Licence for Personal Data.

There can be multiple parcels associated with a title, and a title may only have a part share in a parcel. This means the shape representing the title will be an aggregation of all parcels that the title is associated with. The ‘spatial extents shared’ attribute when equal to ‘false’ will indicate that title has exclusive interest over all of the shape (this will be case for the vast majority).

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see the LINZ website

Layer ID 50804
Data type Vector multipolygon
Feature count 2258004 (incl. 466 with empty or null geometries)
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Boundary Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

60626
6005
Updated
16 Nov 2019

This dataset was last updated on LINZ Data Service on 16 Nov 2019.

This layer provides the latest captured boundary mark information that defines existing parcel boundaries and associated information such as the mark name.

A boundary mark is on a node which defines the boundaries of primary parcels or non primary parcels.

Not all boundary points have a physical monument (e.g. a peg) placed. In this case the boundary mark is recorded as “unmarked”

This dataset extends the Landonline stored data by including the network accuracy which is based upon its assigned Landonline order - refer LINZS25006 (www.linz.govt.nz/about-linz/news-publications-and-... ).

The accuracy provided relates to the accuracy of coordinates of the mark and has little relevance to the accuracy of the boundary in relation to other boundaries. For example, if the coordinates of the mark were used to locate it, a user would expect to find the existing mark within the nominal accuracy (distance) stated.

Layer ID 50774
Data type Vector point
Feature count 12625200
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Primary Road Parcels

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

31964
9611
Updated
16 Nov 2019

This dataset was last updated on LINZ Data Service on 16 Nov 2019.

This layer provides the current road parcel polygons with associated descriptive data.

The combination of this layer with the other land parcels and hydro parcels equates to the primary parcels layer which provides all current parcels for New Zealand (i.e. excludes historic and pending parcels).

This set of three parcel layers (land, hydro and road) enables easy access to the most common groupings of parcel intents (excluding the non primary parcels).

If you require approved or historic parcels see the All Parcels Layer

This layer has a nominal accuracy of 0.1-1m in urban areas and 1-100m in rural areas. For more detailed information about parcel accuracies please refer to the Survey Boundary Marks layer which contains accuracies for each parcel node.

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see

Layer ID 50796
Data type Vector multipolygon
Feature count 299444
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Plans

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

29131
3245
Updated
16 Nov 2019

This dataset was last updated on LINZ Data Service on 16 Nov 2019.

This layer provides metadata about cadastral surveys along with reference points indicating the location of the survey.

A cadastral survey determines and describes the spatial extent (including boundaries) of interest of land within New Zealand. Each survey is allocated a unique reference number (that prior to Landonline included reference to the land district.

This data provides details that identify the type of survey, the purpose, description and key dates relating to the survey.

Layer ID 50794
Data type Vector multipoint
Feature count 1118554
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 11 to 20 of 30