NZ Non-Primary Linear Parcels

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12398
975
Updated
07 May 2021

This dataset was last updated on LINZ Data Service on 07 May 2021.

This layer provides the current non primary linear parcels (e.g. Centreline easements) and their associated descriptive data as a single layer to facilitate their use independently of other non primary parcels.

Linear parcels are non-primary parcels that are defined by a line and a description e.g. the width. The most common example is centreline easements (in gross) e.g. Pipeline easements.

If you require approved or historic linear parcels see the All Parcels Layer

This layer has a nominal accuracy of 0.1-1m in urban areas and 1-100m in rural areas. For more detailed information about parcel accuracies please refer to the Survey Boundary Marks layer which contains accuracies for each parcel node.

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see

Layer ID 50783
Data type Vector linestring
Feature count 7999
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Cadastral Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12832
238
Updated
08 May 2021

This dataset was last updated on LINZ Data Service on 08 May 2021.

This layer provides the extents of influence that the work to integrate survey information has on the surrounding Cadastre.

All cadastral surveys must be integrated into the Cadastre. As part of this process the new information 'upgrades' the existing information. This is controlled by a mathematical adjustment process using a Least Squares methodology.

The adjustment/Integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extend of the change largely depends upon the size of the new survey, the difference in accuracy between new and old data and the number of linkages to other Surveys.

In general, where the underlying surveys are older or in a rural location the greater the extent of the adjustment.

Layer ID 50790
Data type Vector polygon
Feature count 263551
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ WACA Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11158
85
Updated
08 May 2021

This dataset was last updated on LINZ Data Service on 08 May 2021.

This layer provides the extents of the data incorporated into an adjustment which has been completed as a Wide Area Cadastral Adjustment (WACA). These adjustments are undertaken in areas where there is already substantial survey-accurate data, but there are some inconsistencies in the data resulting from small changes to geodetic control coordinates and/or the progressive submission of additional Cadastral Survey Datasets (CSDs). The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be no more than 10cm, as the WACAs target areas where coordinates already have fairly high spatial accuracy.

Layer ID 50836
Data type Vector polygon
Feature count 4428
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Arc Chords

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10503
126
Updated
08 May 2021

This dataset was last updated on LINZ Data Service on 08 May 2021.

This layer provides all authoritative arc survey observations and is targeted at cadastral surveyors.

Only observations that have been captured in Landonline are available. This includes vectors that were re-captured in the Survey Capture Areas from survey plans lodged prior to Landonline and all survey observations since.

Individual cadastral surveys will commonly re-measure or re-use cadastral lines. Often they will be the same, however as the accuracy capability has increased over time, differences between 'old' and 'new' observations are more likely. Thus all survey observations include the reference to the Survey Plan.

Layer ID 50778
Data type Vector linestring
Feature count 334167
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ SPI Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10398
103
Updated
08 May 2021

This dataset was last updated on LINZ Data Service on 08 May 2021.

This layer provides the extents of the data incorporated into an adjustment which has been completed as part of the Spatial Parcel Improvement (SPI) project. The SPI project aims to improve the accuracy of digital cadastral data in areas (primarily rural) where survey-accurate data does not currently exist. The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be at least several metres, as the SPI project targets areas where significant movements are expected.

Layer ID 50835
Data type Vector polygon
Feature count 394
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Parcel Boundaries Wireframe provides a map of land, road and other parcel boundaries, and is especially useful for displaying property boundaries.

This map service is for visualisation purposes only and is not intended for download. You can download the full parcels data from the NZ Parcels dataset.

This map service provides a dark outline and transparent fill, making it perfect for overlaying on our basemaps or any map service you choose.

Data for this map service is sourced from the NZ Parcels dataset which is updated weekly with authoritative data direct from LINZ’s Survey and Title system. Refer to the NZ Parcel layer for detailed metadata.

To simplify the visualisation of this data, the map service filters the data from the NZ Parcels layer to display parcels with a status of 'current' only.

This map service has been designed to be integrated into GIS, web and mobile applications via LINZ’s WMTS and XYZ tile services. View the Services tab to access these services.

See the LINZ website for service specifications and help using WMTS and XYZ tile services and more information about this service.

Updated
Results 21 to 26 of 26