Canterbury Earthquake Survey Mark Movements

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5689
121
Added
12 Sep 2016

This dataset was first added to LINZ Data Service on 12 Sep 2016.

This layer details the movement of survey marks due to the Canterbury Earthquake Sequence (CES). The movements include the impact of 5 major earthquakes on 4 September 2010, 22 February 2011, 13 June 2011, 23 December 2011 and 14 February 2016.

Note that these movements apply only at the survey mark. Nearby land may have moved differently, especially in areas impacted by substantial shallow ground movement.

For further earthquake information, see the Canterbury earthquake information on the LINZ website.

Scope

Movements do not include the regular tectonic movement (not related to earthquakes) of approximately 5cm per year.

As well as Christchurch, the data covers Lyttelton, Spencerville, Kaiapoi, Pines Beach, Woodend, Pegasus and Waikuku Beach.

Mark Movement Calculations

Observed mark movements have been calculated from geodetic and cadastral survey data collected at the same physical survey mark before and after the earthquakes. Various filters have been applied to ensure as far as practicable that the movements reflect real-world earthquake-related movements of marks. For example, only non-boundary marks that have been directly measured (rather than adopted) are included.

Modelled mark movements have been calculated using models of the tectonic-scale movements resulting from each earthquake, supplied by GNS Science, supplemented with more detailed modelling carried out by LINZ. These models typically represent deep-seated movement only. They do not include shallow movement, such as that resulting from liquefaction.

Therefore the difference between the post-earthquake observed and post-earthquake modelled position generally represents shallow ground movement. The difference between the post-earthquake modelled and pre-earthquake observed position generally represents deep-seated movement. The difference between the post-earthquake observed position and pre-earthquake observed position represents total movement due to the earthquakes.

Accuracy

The uncertainty of the coordinate changes is 0.1m at a 95% confidence interval.

Layer Attributes

  • nod_id_post_eq: Landonline node id for the latest post-earthquake node (mark)
  • code_post_eq: Geodetic code for the latest post-earthquake node
  • name_post_eq: Mark name for the latest post-earthquake node
  • nod_id_pre_eq: Landonline node id for the pre-earthquake node (mark)
  • code_pre_eq: Geodetic code for the pre-earthquake node
  • name_pre_eq: Mark name for the pre-earthquake node
  • de_mod_obs: East change from modelled post-earthquake to observed post-earthquake position
  • dn_mod_obs: North change from modelled post-earthquake to observed post-earthquake position
  • hz_mod_obs: Horizontal change from modelled post-earthquake to observed post-earthquake position
  • bg_mod_obs: Bearing from modelled post-earthquake to observed post-earthquake position
  • de_pre_mod: East change from observed pre-earthquake to modelled post-earthquake position
  • dn_pre_mod: North change from observed pre-earthquake to modelled post-earthquake position
  • hz_pre_mod: Horizontal change from observed pre-earthquake to modelled post-earthquake position
  • bg_pre_mod: Bearing from observed pre-earthquake to modelled post-earthquake position
  • de_pre_obs: East change from observed pre-earthquake to observed post-earthquake position
  • dn_pre_obs: North change from observed pre-earthquake to observed post-earthquake position
  • hz_pre_obs: Horizontal change from observed pre-earthquake to observed post-earthquake position
  • bg_pre_obs: Bearing from observed pre-earthquake to observed post-earthquake position
Layer ID 53455
Data type Vector point
Feature count 8882
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Christchurch Post-EQ Survey-Accurate (SDC) Boundary Coordinates

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9472
554
Added
22 Feb 2015

This dataset was first added to LINZ Data Service on 22 Feb 2015.

For further information about this dataset, see the Canterbury earthquake information.

Coordinates computed by adding the effects of deep-seated movement to survey points that had authoritative survey-accurate digital cadastre (SDC) coordinates immediately prior to 4 September 2010 (the first Canterbury earthquake). Marks that did not have SDC status at that time are not included in the dataset. Deep-seated movements were evaluated using the NZGD2000 deformation model.

  • The 'nod_id' column is the Landonline node id. This is the unique identifier for the mark.
  • The 'current_name' column is the Landonline mark name. Many boundary marks do not have a name recorded in this dataset, because this information has not been digitally captured.
  • The 'east_mtpleatm2000' and 'north_mtpleatm2000' columns are the east and north coordinates (metres) in terms of the Mt Pleasant 2000 transverse mercator projection. Rounded to the nearest centimetre.
  • The 'coord_order' column is the Landonline coordinate order immediately prior to 4 September 2010.

The estimated absolute uncertainty of these coordinates is 0.09m at the 95% confidence level.

These coordinates are intended for the use of Licensed Cadastral Surveyors when locating boundaries in Christchurch, in accordance with the Rules for Cadastral Survey 2010 and associated guidance, particularly guidance relating to the earthquakes.

Layer ID 52350
Data type Vector point
Feature count 415489
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Christchurch Post-EQ Survey-Accurate (SDC) Non-Boundary Coordinates

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9497
645
Added
22 Feb 2015

This dataset was first added to LINZ Data Service on 22 Feb 2015.

For further information about this dataset, see the Canterbury earthquake information.

Coordinates computed by adding the effects of deep-seated movement to survey points that had authoritative survey-accurate digital cadastre (SDC) coordinates immediately prior to 4 September 2010 (the first Canterbury earthquake). Marks that did not have SDC status at that time are not included in the dataset. Deep-seated movements were evaluated using the NZGD2000 deformation model.

  • The 'nod_id' column is the Landonline node id. This is the unique identifier for the mark.
  • The 'current_name' column is the Landonline mark name.
  • The 'east_mtpleatm2000' and 'north_mtpleatm2000' columns are the east and north coordinates (metres) in terms of the Mt Pleasant 2000 transverse mercator projection. Rounded to the nearest centimetre.
  • The 'coord_order' column is the Landonline coordinate order immediately prior to 4 September 2010.

The estimated absolute uncertainty of these coordinates is 0.09m at the 95% confidence level.

These coordinates are intended for the use of Licensed Cadastral Surveyors when locating boundaries in Christchurch, in accordance with the Rules for Cadastral Survey 2010 and associated guidance, particularly guidance relating to the earthquakes.

Layer ID 52349
Data type Vector point
Feature count 50181
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Capture Areas (SCA)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

13649
444
Added
22 Jul 2011

This dataset was first added to LINZ Data Service on 22 Jul 2011.

This layer provides cadastral Survey Capture Areas (SCA).

In conjunction with the implementation of Landonline in each region, LINZ undertook a project to "back-capture" existing parcel boundaries in the main centres of population and land development. It was intended to "back-capture" approximately 70 percent of existing parcels, which equates to about 20 percent of the land area of New Zealand.

The data capture known as "Populate Electronic Parcel" (PEP) was undertaken under contract by EDS.

The areas to be captured known as "Survey Capture Areas" (SCA) were defined in consultation with local LINZ staff, survey practitioners and Local Authorities.

Within the defined SCAs, the dimensions for surveyed right-lined boundaries of current parcels were captured from existing survey plans. In addition, sufficient traverses, boundary ties, and connections to the geodetic control were captured or surveyed to ensure adequate network geometry and strengthen areas where the boundary dimensions are unreliable. This survey network was adjusted to generate modern survey coordinates for all relevant nodes. Where the resulting boundaries comply with the accuracy requirements of the 1998 Survey Regulations, then the adjusted co-ordinates were declared to have SDC (Survey-accurate Digital Cadastre) status.

For more information see here

Layer ID 50840
Data type Vector multipolygon
Feature count 84
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 21 to 24 of 24