NZ Survey Capture Areas (SCA)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

15314
472
Added
22 Jul 2011

This dataset was first added to LINZ Data Service on 22 Jul 2011.

This layer provides cadastral Survey Capture Areas (SCA).

In conjunction with the implementation of Landonline in each region, LINZ undertook a project to "back-capture" existing parcel boundaries in the main centres of population and land development. It was intended to "back-capture" approximately 70 percent of existing parcels, which equates to about 20 percent of the land area of New Zealand.

The data capture known as "Populate Electronic Parcel" (PEP) was undertaken under contract by EDS.

The areas to be captured known as "Survey Capture Areas" (SCA) were defined in consultation with local LINZ staff, survey practitioners and Local Authorities.

Within the defined SCAs, the dimensions for surveyed right-lined boundaries of current parcels were captured from existing survey plans. In addition, sufficient traverses, boundary ties, and connections to the geodetic control were captured or surveyed to ensure adequate network geometry and strengthen areas where the boundary dimensions are unreliable. This survey network was adjusted to generate modern survey coordinates for all relevant nodes. Where the resulting boundaries comply with the accuracy requirements of the 1998 Survey Regulations, then the adjusted co-ordinates were declared to have SDC (Survey-accurate Digital Cadastre) status.

For more information see here

Layer ID 50840
Data type Vector multipolygon
Feature count 84
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Primary Hydro Parcels

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12541
2651
Updated
03 Jul 2020

This dataset was last updated on LINZ Data Service on 03 Jul 2020.

This layer provides the current Hydro parcel polygons with associated descriptive data.

The combination of this layer with the other land parcels and road parcels equates to the primary parcels layer which provides all current parcels for New Zealand (i.e. excludes historic and pending parcels).

This set of three parcel layers (land, road and hydro) enables easy access to the most common groupings of parcel intents (excluding non primary parcels).

If you require approved or historic parcels see the All Parcels Layer

This layer has a nominal accuracy of 0.1-1m in urban areas and 1-100m in rural areas. For more detailed information about parcel accuracies please refer to the Survey Boundary Marks layer which contains accuracies for each parcel node.

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see

Layer ID 50771
Data type Vector multipolygon
Feature count 23870
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Non-Boundary Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12078
1721
Updated
04 Jul 2020

This dataset was last updated on LINZ Data Service on 04 Jul 2020.

This layer provides survey mark information for marks that are not part of a parcel

A non-boundary mark is any survey mark that is not on a boundary point. The points in this dataset represent physical survey monuments usually placed for cadastral requirements. The data set also includes geodetic marks. Non-boundary marks now enter the Landonline system predominately as part of a cadastral survey dataset (plan) and occasionally via the geodetic processes. For Cadastral marks (i.e.the majority) its name consists of a mark type and number (and is unique to that survey), followed by the ‘plan’ number e.g. IS I DP 3456; IS II DP3456.

Note:
Non-boundary marks used to connect cadastral surveys to the geodetic network are those of 6th order (or better) and this subset is available as the NZ Cadastral Survey Network Marks layer.

This dataset extends the Landonline stored data by including the network accuracy which is based upon its assigned Landonline order - refer LINZS25006 (www.linz.govt.nz/about-linz/news-publications-and-...).

The accuracy provided relates to the accuracy of coordinates of the mark and has little relevance to the accuracy of the boundary in relation to other boundaries. For example, if the coordinates of the mark were used to locate it, a user would expect to find the existing mark within the accuracy (distance) stated.

Layer ID 50776
Data type Vector point
Feature count 2562976 (incl. 34 with empty or null geometries)
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Observations (Cadastral)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11460
1961
Updated
04 Jul 2020

This dataset was last updated on LINZ Data Service on 04 Jul 2020.

This layer provides all authoritative bearing and distance survey observations which form part of the cadastral survey dataset

Only observations that have been captured in Landonline are available. This includes observations that were re-captured in the Survey Capture Areas from survey plans lodged prior to Landonline and all survey observations since.

Individual cadastral surveys will commonly re-measure or re-use cadastral lines. Often they will be the same, however as the accuracy capability has increased over time, differences between 'old' and 'new' observations are more likely. Thus all survey observations include the reference to the survey plan.

This dataset only contains right-line survey observations. A small fraction of the total number of survey observations are defined as arcs and are provided via the Survey Arc Chords layer.

Layer ID 51694
Data type Vector linestring
Feature count 45081147
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Strata Parcels

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11160
522
Updated
03 Jul 2020

This dataset was last updated on LINZ Data Service on 03 Jul 2020.

This layer provides the current strata parcel polygons and their associated descriptive data as a single layer to facilitate their use independently of other primary parcels or non primary parcels.

Strata parcels are portions of land where the vertical extent is limited.

The combination of this layer with the primary parcels layer provides all current parcels for New Zealand (i.e. excludes Historic and Pending parcels)

If you require approved or historic parcels see the All Parcels Layer

This layer has a nominal accuracy of 0.1-1m in urban areas and 1-100m in rural areas. For more detailed information about parcel accuracies please refer to the Survey Boundary Marks layer which contains accuracies for each parcel node.

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see

Layer ID 50780
Data type Vector multipolygon
Feature count 623
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Christchurch Post-EQ Survey-Accurate (SDC) Boundary Coordinates

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10411
563
Added
22 Feb 2015

This dataset was first added to LINZ Data Service on 22 Feb 2015.

For further information about this dataset, see the Canterbury earthquake information.

Coordinates computed by adding the effects of deep-seated movement to survey points that had authoritative survey-accurate digital cadastre (SDC) coordinates immediately prior to 4 September 2010 (the first Canterbury earthquake). Marks that did not have SDC status at that time are not included in the dataset. Deep-seated movements were evaluated using the NZGD2000 deformation model.

  • The 'nod_id' column is the Landonline node id. This is the unique identifier for the mark.
  • The 'current_name' column is the Landonline mark name. Many boundary marks do not have a name recorded in this dataset, because this information has not been digitally captured.
  • The 'east_mtpleatm2000' and 'north_mtpleatm2000' columns are the east and north coordinates (metres) in terms of the Mt Pleasant 2000 transverse mercator projection. Rounded to the nearest centimetre.
  • The 'coord_order' column is the Landonline coordinate order immediately prior to 4 September 2010.

The estimated absolute uncertainty of these coordinates is 0.09m at the 95% confidence level.

These coordinates are intended for the use of Licensed Cadastral Surveyors when locating boundaries in Christchurch, in accordance with the Rules for Cadastral Survey 2010 and associated guidance, particularly guidance relating to the earthquakes.

Layer ID 52350
Data type Vector point
Feature count 415489
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Christchurch Post-EQ Survey-Accurate (SDC) Non-Boundary Coordinates

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10288
647
Added
22 Feb 2015

This dataset was first added to LINZ Data Service on 22 Feb 2015.

For further information about this dataset, see the Canterbury earthquake information.

Coordinates computed by adding the effects of deep-seated movement to survey points that had authoritative survey-accurate digital cadastre (SDC) coordinates immediately prior to 4 September 2010 (the first Canterbury earthquake). Marks that did not have SDC status at that time are not included in the dataset. Deep-seated movements were evaluated using the NZGD2000 deformation model.

  • The 'nod_id' column is the Landonline node id. This is the unique identifier for the mark.
  • The 'current_name' column is the Landonline mark name.
  • The 'east_mtpleatm2000' and 'north_mtpleatm2000' columns are the east and north coordinates (metres) in terms of the Mt Pleasant 2000 transverse mercator projection. Rounded to the nearest centimetre.
  • The 'coord_order' column is the Landonline coordinate order immediately prior to 4 September 2010.

The estimated absolute uncertainty of these coordinates is 0.09m at the 95% confidence level.

These coordinates are intended for the use of Licensed Cadastral Surveyors when locating boundaries in Christchurch, in accordance with the Rules for Cadastral Survey 2010 and associated guidance, particularly guidance relating to the earthquakes.

Layer ID 52349
Data type Vector point
Feature count 50181
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Linear Parcels

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9511
537
Updated
03 Jul 2020

This dataset was last updated on LINZ Data Service on 03 Jul 2020.

This layer provides all linear parcels (e.g. Centreline easements) and their associated descriptive data as a single layer to facilitate their use independently of the all polygon parcels.

NOTE: This layer contains primary and non-primary approved, current or historic linear parcels (see status flag descriptions for more information).

In conjunction with the Parcels, this layer provides the easiest way to create a relationship with associated tables such as Parcel Title Association List, Parcel Statutory Actions List and Survey Affected Parcels List.

This layer contains spatial and non-spatial (without geometry) parcels. The Landonline system which manages the data maintains non-spatial parcels for many different reasons. The non-spatial parcels can only be accessed via WFS or as a full layer file download. No layer clips can be used. The most common reasons for non-spatial parcels are:

  1. Flats and unit survey plans will create non-spatial parcels for referencing property rights. This is because the Landonline system has not yet been designed to support the spatial definition of these plans.

  2. Titles which were not linked to a spatial parcel during the Landonline title conversion project created non-spatial parcel references. As titles are spatially linked many of these non-spatial parcels will be made historic or will be merged with the associated spatial parcel.

Parcels within this layer contain the following status flags:

  • Approved: The definition of a survey-defined parcel that has been processed and authorised as correct in terms of the survey network.

  • Current: A parcels that has been registered or the parcel is made current by a statutory action against a Legalisation plan.

  • Survey Historic: A parcel that has been extinguished from the primary cadastral network but still exists in live Title estates.

  • Historic: A parcel that has been extinguished from the primary cadastral network and no longer exists in live Title estates or has an current recorded statutory action. Typically this happens when a parcel is subdivided or merged, and new titles or actions are registered against the replacing parcels. Note: Only parcel made historic since the beginning of Landonline operations (2002) are included. See this page for the actual dates when Landonline operations started.

The Linear parcels within this layer has a nominal accuracy of 0.1-1m in urban areas and 1-100m in rural areas. For more detailed information about parcel accuracies please refer to the Survey Boundary Marks layer which contains accuracies for each parcel node.

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see.

Layer ID 51570
Data type Vector linestring
Feature count 9754
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Non-Primary Linear Parcels

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8477
844
Updated
03 Jul 2020

This dataset was last updated on LINZ Data Service on 03 Jul 2020.

This layer provides the current non primary linear parcels (e.g. Centreline easements) and their associated descriptive data as a single layer to facilitate their use independently of other non primary parcels.

Linear parcels are non-primary parcels that are defined by a line and a description e.g. the width. The most common example is centreline easements (in gross) e.g. Pipeline easements.

If you require approved or historic linear parcels see the All Parcels Layer

This layer has a nominal accuracy of 0.1-1m in urban areas and 1-100m in rural areas. For more detailed information about parcel accuracies please refer to the Survey Boundary Marks layer which contains accuracies for each parcel node.

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see

Layer ID 50783
Data type Vector linestring
Feature count 7802
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Cadastral Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8785
218
Updated
04 Jul 2020

This dataset was last updated on LINZ Data Service on 04 Jul 2020.

This layer provides the extents of influence that the work to integrate survey information has on the surrounding Cadastre.

All cadastral surveys must be integrated into the Cadastre. As part of this process the new information 'upgrades' the existing information. This is controlled by a mathematical adjustment process using a Least Squares methodology.

The adjustment/Integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extend of the change largely depends upon the size of the new survey, the difference in accuracy between new and old data and the number of linkages to other Surveys.

In general, where the underlying surveys are older or in a rural location the greater the extent of the adjustment.

Layer ID 50790
Data type Vector polygon
Feature count 254203
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 11 to 20 of 24