Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to LINZ Data Service on 19 Nov 2019.
325feedf-88e3-34d4-0150-2ab925c31628
eng
utf8
dataset
dataset
Toitū Te Whenua Land Information New Zealand
Lidar Coordination Manager
04 4600110
155 The Terrace
Wellington
6145
New Zealand
customersupport@linz.govt.nz
pointOfContact
2019-12-05
ANZLIC Metadata Profile: An Australian/New Zealand Profile of AS/NZS ISO 19115:2005, Geographic information - Metadata
1.1
2193
Northland - Whangarei Heads LiDAR 1m DEM (2016)
This layer contains the DEM for LiDAR data in the Northland Region surronding Whangarei Heads captured in 2016.
- The DSM is available as layer [Northland - Whangarei Heads LiDAR 1m DSM (2016)](https://data.linz.govt.nz/layer/104237).
- The index tiles are available as layer [Northland - Whangarei Heads LiDAR Index Tiles (2016)](https://data.linz.govt.nz/layer/104238).
- The LAS point cloud and vendor project reports are available from [OpenTopography](https://portal.opentopography.org/datasets?loc=New%20Zealand).
LiDAR was captured for Toitū Te Whenua Land Information New Zealand by Aerial Surveys in November 2016. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.
Data comprises:
- DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
- DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
- Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
Pulse density specification is at a minimum of 2 pulses/square metre.
Vertical datum is NZVD2016.
completed
Toitū Te Whenua Land Information New Zealand
Lidar Coordination Manager
04 4600110
155 The Terrace
Wellington
6145
New Zealand
customersupport@linz.govt.nz
pointOfContact
notPlanned
*.xml
Unknown
New Zealand
theme
ANZLIC Jurisdictions
Version 2.1
2008-10-29
http://asdd.ga.gov.au/asdd/profileinfo/anzlic-jurisdic.xml#anzlic-jurisdic
ANZLIC the Spatial Information Council
custodian
unclassified
Copyright in this work is owned by Toitū Te Whenua Land Information New Zealand
© Toitū Te Whenua Land Information New Zealand
copyright
Released by LINZ under Creative Commons Attribution 4.0 New Zealand (CC BY 4.0) with:
Following Attribution:
"Sourced from the LINZ Data Service and licensed by Toitū Te Whenua Land Information New Zealand, for re-use under CC BY 4.0."
For details see: https://www.linz.govt.nz/data/licensing-and-using-data/attributing-elevation-or-aerial-imagery-data
license
grid
1000
eng
utf8
elevation
ANZMet Lite Country codelist
Version 1.0
2009-03-31
http://asdd.ga.gov.au/asdd/profileinfo/anzlic-country.xml#Country
ANZLIC the Spatial Information Council
custodian
nzl
https://data.linz.govt.nz/layer/104236-northland-whangarei-heads-lidar-1m-dem-2016/
dataset
dataset
Data Acquisition:
Airborne Laser Scanner (ALS) data was acquired from a fixed wing aircraft on 21 and 22 November 2016, using Aerial Surveys Optech Orion H300 LiDAR system.
Survey Specification:
• Scanner: Optech Orion H300
• Flying Height: 1475 m AMGL
• Scan Angle: ±20 degrees
• Scan Frequency: 45.0Hz
• Pulse Rate: 1750kHz
• Swath Overlap: 30%
• Points Per M2: 2
Data Processing:
The LiDAR sensor positioning and orientation (POS) was determined using the collected GPS/IMU datasets and Applanix POSPac software.
Base Station Position:
WHNG owned by LINZ
-35 48 13.577724 S 174 18 52.4394 E
172.775 Ell Height
The POS data was combined with the LiDAR range files and used to generate LIDAR point clouds in NZTM and ellipsoidal heights. This process was undertaken using Optech LMS LiDAR processing software. The data was checked for completeness of coverage. The relative fit of data in the overlap between strips was also checked.
The height accuracy of the ground classified LiDAR points was checked using open land-cover survey check site data collected by Sounds Surveying Ltd. This was done by calculating height differences statistics between a TIN of the LiDAR ground points and the checkpoints. The standard deviation statistic is 0.019 m; a RMS of 0.038 m and the average difference is -0.03 m.
The positional accuracy of the LiDAR data has been checked by overlaying Sounds Surveying Ltd surveyed data over the LiDAR data displayed coded by intensity. The data was found to fit well in position.
The point cloud data was then classified withTerraSolid LiDAR processing software into ground and above ground returns using automated routines tailored to the project landcover and terrain.
All product deliverables supplied in terms of NZTM map projection and NZVD2016 height datum.
Classification of the point cloud followed the classification scheme below:
2 - Ground
14 - Above Ground
Above_Ground (14) points was reclassified by LINZ as Unassigned classification (1) before providing the classified point cloud data to Open Topography. There are no (7) Noise, (9) Water and (12) Overlap points in the data even though these were referenced in the report
Lakes and large rivers were hydroflattened in the Bare Earth Digital Elevation Model.
The deliverables to LINZ were:
1m gridded bare earth digital elevation model (DEM)
1m gridded digital surface model (DSM)
Classified point cloud
Copyright of this work is owned by Toitū Te Whenua Land Information New Zealand
© LINZ
copyright
Released by LINZ under Creative Commons Attribution 4.0 International (CC BY 4.0) with:
Following Attribution:
"Sourced from the LINZ Data Service and licensed for reuse under CC BY 4.0"
For details see https://www.linz.govt.nz/data/licensing-and-using-data/attributing-linz-data
license