ANZLIC Metadata Profile: An Australian/New Zealand Profile of AS/NZS ISO 19115:2005, Geographic information - Metadata
Metadata Standard Version
1.1
Identification Info
Data Identification
Citation
Citation
Title
NZ Chatham Island Island Polygons (Topo, 1:250k)
Date
Abstract
Area of dry or relatively dry land surrounded by water or low wetland
Data Dictionary for island_poly: http://apps.linz.govt.nz/topo-data-dictionary/index.aspx?page=class-island_poly
This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.
Further information on Topo250: http://www.linz.govt.nz/topography/topo-maps/topo250
Purpose
Topo250 is the official small scale topographic map series used by New Zealand emergency services.
When using Topo250 data, please be aware of the following: 1. Representation of a road or track does not necessarily indicate public right of access. For access rights, maps and other information, contact the New Zealand Walking Access Commission - www.walkingaccess.govt.nz
2. The Department of Conservation and other agencies should be contacted for the latest information on tracks and back country huts.
3. Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.
4. Contours and spot elevations in forest and snow areas may be less accurate.
5. Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies.
6. Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.
Land Information New Zealand and the New Zealand Government.
All rights reserved
Use Constraints
Restriction Code
copyright
Resource Constraints
Legal Constraints
Use Limitation
Released under Creative Commons Attribution 4.0 International with:
Following Disclaimers: 1. Representation of a road or track does not necessarily indicate public right of access. For access rights, maps and other information, contact the New Zealand Walking Access Commission - www.walkingaccess.govt.nz 2. The Department of Conservation and other agencies should be contacted for the latest information on tracks and back country huts. 3. Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data. 4. Contours and spot elevations in forest and snow areas may be less accurate. 5. Note that not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies 6. Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.
Following Attribution: If you publish, distribute or otherwise disseminate this work to the public without adapting it, the following attribution to Land Information New Zealand should be used: 'CC BY 4.0 Land Information New Zealand'
If you adapt this work in any way or include it in a collection, and publish, distribute or otherwise disseminate that adaptation or collection to the public, the following attribution to Land Information New Zealand should be used: 'Contains data sourced from the LINZ Data Service and licensed for reuse under CC BY 4.0.'
If 'attribution stacking' problems exist then the requirement to display the above attribution statements is waived and in lieu the attribution statement is to be made in any terms or conditions associated with the work/ product/ application/ etc.
LINZ and our predecessors have been responsible for national topographic mapping in New Zealand for more than a hundred years.
The first digital data at 1:250,000 scale was created in the late 80's by scanning the 1:250,000 maps that existed at the time (known as the NZMS 262 series, which replaced the earlier NZMS 18 series)
The NZMS 262 series were generalised from the NZMS 260 series.
The Topo250 map series are compiled from a mix of information from the NZMS 262 series, and that from the Topo50.
LINZ releases regular updates of the Topo250 maps and data. Details are posted at http://www.linz.govt.nz/docs/topography/250-sheet-history.xls
Metadata Constraints
Security Constraints
Classification
Classification Code
unclassified
Metadata Constraints
Legal Constraints
Use Limitation
Copyright 2011 Crown copyright (c)
Land Information New Zealand and the New Zealand Government.
All rights reserved
Use Constraints
Restriction Code
copyright
Metadata Constraints
Legal Constraints
Use Limitation
Released under Creative Commons Attribution 4.0 International
