ANZLIC Metadata Profile: An Australian/New Zealand Profile of AS/NZS ISO 19115:2005, Geographic information - Metadata
Metadata Standard Version
1.1
Reference System Info
Reference System
Reference System Identifier
Identifier
Code
urn:ogc:def:crs:EPSG::2193
Identification Info
Data Identification
Citation
Citation
Title
NZ Terrain Relief (Topo50)
Date
Abstract
In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.
Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets.
The Topo50 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:50,000 scale.
Further information on Topo50: http://www.linz.govt.nz/topography/topo-maps/topo50
Purpose
Topo50 is the official topographic map series used by New Zealand emergency services.
When using Topo50 data, please be aware of the following: 1. The existence of a road or track does not necessarily indicate public right of access.
2. Closed tracks are defined as being no longer maintained or passable and should not be used by recreationalists. The Department of Conservation or other authorities should be contacted for the latest information on tracks and huts.
3. Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.
4. Contours and spot elevations in forest and snow areas may be less accurate.
5. Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies.
6. Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.
Land Information New Zealand and the New Zealand Government.
All rights reserved
Use Constraints
Restriction Code
copyright
Resource Constraints
Legal Constraints
Use Limitation
Released under Creative Commons Attribution 4.0 International with:
Following Disclaimers: 1. The existence of a road or track does not necessarily indicate public right of access. 2. Closed tracks are defined as being no longer maintained or passable and should not be used by recreationalists. The Department of Conservation or other authorities should be contacted for the latest information on tracks and huts. 3. Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data. 4. Contours and spot elevations in forest and snow areas may be less accurate. 5. Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies. 6. Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.
Following Attribution: If you publish, distribute or otherwise disseminate this work to the public without adapting it, the following attribution to Land Information New Zealand should be used: 'CC BY 4.0 Land Information New Zealand’
If you adapt this work in any way or include it in a collection, and publish, distribute or otherwise disseminate that adaptation or collection to the public, the following attribution to Land Information New Zealand should be used: ‘Contains data sourced from the LINZ Data Service and licensed for reuse under CC BY 4.0.'
If “attribution stacking” problems exist then the requirement to display the above attribution statements is waived and in lieu the attribution statement is to be made in any terms or conditions associated with the work/ product/ application/ etc.
LINZ and our predecessors have been responsible for national topographic mapping in New Zealand for more than a hundred years.
The first digital data was created in the late 80’s and early 90’s by scanning the 1:50,000 maps that existed at the time (known as the NZMS 260 series, which replaced the imperial NZMS 1 series at 1inch to 1 mile)
The raw data was created by photogrammetrists who from 1974 to 1997 mapped the country from overlapping pairs of aerial photographs. Cartographers then took the data and added symbols and text, and created the colour separations needed to produce the printed maps.
From 1994 to 2006 LINZ used orthophotos to update the map data. Today the map data is updated primarily from satellite imagery, and data supplied from Department of Conservation, Transit NZ and others.
LINZ releases regular updates of the Topo50 maps and data; for details refer http://www.linz.govt.nz/topography/topo-maps/topo50/update-history
Metadata Constraints
Security Constraints
Classification
Classification Code
unclassified
Metadata Constraints
Legal Constraints
Use Limitation
Copyright 2011 Crown copyright (c)
Land Information New Zealand and the New Zealand Government.
All rights reserved
Use Constraints
Restriction Code
copyright
Metadata Constraints
Legal Constraints
Use Limitation
Released under Creative Commons Attribution 4.0 International