ANZLIC Metadata Profile: An Australian/New Zealand Profile of AS/NZS ISO 19115:2005, Geographic information - Metadata
Metadata Standard Version
1.1
Identification Info
Data Identification
Citation
Citation
Title
NZ Coastlines and Islands Polygons (Topo 1:250k)
Date
Abstract
This provides a polygon coastline and islands layer which is based on the Topo250 products. It is a combination of the following layers:
- [NZ Mainland coastlines (Topo, 1:250k)](http://data.linz.govt.nz//layer/50158-nz-mainland-coastlines-topo-1250k/) - [NZ Mainland island polygons (Topo, 1:250k)](http://data.linz.govt.nz/layer/50167-nz-mainland-island-polygons-topo-1250k/) - [NZ Chatham Is island polygons (Topo, 1:250k)](http://data.linz.govt.nz/layer/50131-nz-chatham-is-island-polygons-topo-1250k/)
This topographic coastline is the line forming the boundary between the land and sea, defined by mean high water.
Islands from the NZ Island Polygons layer that lie within the NZ Coastline and Chatham Islands areas (i.e. islands in lakes, rivers and estuaries) have been removed.
The GIS workflow to create the layer is:
1. NZ Coastlines were converted from a polyline to a polygon using a polyline to polygon tool. 2. The resulting coastal polygon was then used as an input into an erase tool and run against the NZ Island Polygon layer to remove all islands lying within the NZ Mainland and Stewart Island. 3. This was then merged with the NZ Chatham Is island polygons (Topo, 1:250k) that have had the islands within the main island polygon removed using a merge tool. 4. Lake Onoke from the NZ Mainland lake polygons (Topo, 1:250k) layer and Te Whanga Lagoon from the NZ Chatham Is lagoon polygons (Topo, 1:250k) layer were then erased from the resultant polygon layer to include these two water bodies in the coastline definition.
For more detailed description of each layer refer to the layer urls above.
Purpose
Topo50 is the official topographic map series used by New Zealand emergency services. When using Topo50 data, please be aware of the following:
1. Representation of a road or track does not necessarily indicate public right of access. For access rights, maps and other information, contact the New Zealand Walking Access Commission - www.walkingaccess.govt.nz 2. The Department of Conservation and other agencies should be contacted for the latest information on tracks and back country huts. Closed tracks are defined as being no longer maintained or passable and should not be used. 3. Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data. 4. Contours and spot elevations in forest and snow areas may be less accurate. 5. Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies. 6. Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.
Land Information New Zealand and the New Zealand Government.
All rights reserved
Use Constraints
Restriction Code
copyright
Resource Constraints
Legal Constraints
Use Limitation
Released by LINZ under Creative Commons Attribution 4.0 International (CC BY 4.0) with:
Following Disclaimers: 1. Representation of a road or track does not necessarily indicate public right of access. For access rights, maps and other information, contact the New Zealand Walking Access Commission - www.walkingaccess.govt.nz 2. The Department of Conservation and other agencies should be contacted for the latest information on tracks and back country huts. Closed tracks are defined as being no longer maintained or passable and should not be used. 3. Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data. 4. Contours and spot elevations in forest and snow areas may be less accurate. 5. Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies 6. Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.
Following Attribution: "Sourced from the LINZ Data Service and licensed for reuse under CC BY 4.0"
For details see https://www.linz.govt.nz/data/licensing-and-using-data/attributing-linz-data
LINZ and our predecessors have been responsible for national topographic mapping in New Zealand for more than a hundred years.
The first digital data at 1:50,000 was created in the late 80's and early 90's by scanning the 1:50,000 maps that existed at the time (known as the NZMS 260 series, which replaced the imperial NZMS 1 series at 1inch to 1 mile)
The raw data was created by photogrammetrists who from 1974 to 1997 mapped the country from overlapping pairs of aerial photographs. Cartographers then took the data and added symbols and text, and created the colour separations needed to produce the printed maps.
From 1994 to 2006 LINZ used orthophotos to update the map data. Today the map data is updated primarily from aerial and satellite imagery, and data supplied from Department of Conservation, Transit NZ and others.
LINZ releases regular updates of the Topo50 maps and data; for details refer http://www.linz.govt.nz/topography/topo-maps/topo50/update-history
Some features are subject to change more than others. For example in any given map revision, it is likely that road data will undergo more change than, for example, fumeroles. However, all data is examined during a full data revision.
Metadata Constraints
Security Constraints
Classification
Classification Code
unclassified
Metadata Constraints
Legal Constraints
Use Limitation
Copyright 2011 Crown copyright (c)
Land Information New Zealand and the New Zealand Government.
All rights reserved
Use Constraints
Restriction Code
copyright
Metadata Constraints
Legal Constraints
Use Limitation
Released under Creative Commons Attribution 4.0 International