Sounding points (Hydro, 1:350k - 1:1,500k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4801
318
Updated
13 Jan 2016

This dataset was last updated on LINZ Data Service on 13 Jan 2016.

A measured water depth or spot which has been reduced to a vertical datum (may be a drying height).

S-57 Object Class: Sounding

S-57 Acronym: SOUNDG

This data was compiled for the use in the scale range 1:350,000 to 1:1,500,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 418
Data type Vector point
Feature count 10816
ElevationZ coordinates

Chart NZ 46 Cook Strait

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5455
316
Updated
11 May 2015

This dataset was last updated on LINZ Data Service on 11 May 2015.

Raster chart image of: NZ 46 Cook Strait

This data was compiled for the use at the following scale: 1:200000

File reference: NZ4601

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

Layer ID 1245
Data type Image/Raster
Resolution About 8.455m

NZ Terrain Relief (Topo250)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4572
549
Updated
10 May 2013

This dataset was last updated on LINZ Data Service on 10 May 2013.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo250 map series. There may be subtle differences in the relief shading of adjacent map sheets.

The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250

Layer ID 766
Data type Image/Raster
Resolution 50.000m

Chart NZ 532 Approaches to Auckland

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4876
337
Updated
19 Jan 2016

This dataset was last updated on LINZ Data Service on 19 Jan 2016.

Raster chart image of: NZ 532 Approaches to Auckland

This data was compiled for the use at the following scale: 1:100000

File reference: NZ5320

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

Layer ID 1277
Data type Image/Raster
Resolution About 4.206m

NZ Topo50 Gridless Maps

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4703
544
Updated
07 Jan 2016

This dataset was last updated on LINZ Data Service on 07 Jan 2016.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • The existence of a road or track does not necessarily indicate public right of access.

  • Closed tracks are defined as being no longer maintained or passable and should not be used by recreationalists. The Department of Conservation or other authorities should be contacted for the latest information on tracks and huts.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in forest and snow areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Layer ID 2343
Data type Image/Raster
Resolution 4.000m

NZ Native Polygons (Topo, 1:50k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3687
1346
Updated
06 Jan 2016

This dataset was last updated on LINZ Data Service on 06 Jan 2016.

A tract of land covered by trees native to New Zealand.

Data Dictionary for native_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 306
Data type Vector polygon
Feature count 99503
Primary key t50_fid

NZ Survey Non-Boundary Marks

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4199
661
Updated
06 Feb 2016

This dataset was last updated on LINZ Data Service on 06 Feb 2016.

This layer provides survey mark information for marks that are not part of a parcel

A non-boundary mark is any survey mark that is not on a boundary point. The points in this dataset represent physical survey monuments usually placed for cadastral requirements. The data set also includes geodetic marks. Non-boundary marks now enter the Landonline system predominately as part of a cadastral survey dataset (plan) and occasionally via the geodetic processes. For Cadastral marks (i.e.the majority) its name consists of a mark type and number (and is unique to that survey), followed by the ‘plan’ number e.g. IS I DP 3456; IS II DP3456.

Note:
Non-boundary marks used to connect cadastral surveys to the geodetic network are those of 6th order (or better) and this subset is available as the NZ Cadastral Survey Network Marks layer.

This dataset extends the Landonline stored data by including the network accuracy which is based upon its assigned Landonline order - refer LINZS25006 (www.linz.govt.nz/about-linz/news-publications-and-...).

The accuracy provided relates to the accuracy of coordinates of the mark and has little relevance to the accuracy of the boundary in relation to other boundaries. For example, if the coordinates of the mark were used to locate it, a user would expect to find the existing mark within the accuracy (distance) stated.

Layer ID 776
Data type Vector point
Feature count 2239647 (incl. 32 with empty or null geometries)
Primary key id

NZ Orthophotos 2005-2006

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4668
147
Added
13 Sep 2011

This dataset was first added to LINZ Data Service on 13 Sep 2011.

LINZ publishes 1:25,000 scale orthophotos of New Zealand from its archive. The New Zealand orthophotos shown are historical and no further orthophotos of New Zealand will be published.

Coverage of 1 pixel is 2.5m x 2.5m

Layer ID 1012
Data type Image/Raster
Resolution 2.500m

Landonline: Road Centre Line

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4002
708
Updated
06 Feb 2016

This dataset was last updated on LINZ Data Service on 06 Feb 2016.

Please read: This layer is part of the comprehensive Full Landonline Dataset and is designed for use only by data professionals who require the complex version of our property ownership and boundary data for advanced uses. For a simplified version of data contained within this table see the road datasets in the Electoral Group.


This layer contains road and railway centrelines held within Landonline for electoral purposes. These centrelines are required to indicate the presence of an authoritative road or railway name. Named centrelines are not intended to represent the exact location of a road or railway formation. Named centrelines do not indicate the presence of legal access.

Please refer to the LDS Full Landonline Data Dictionary and Models for detailed metadata about this table.

Layer ID 2023
Data type Vector linestring
Feature count 280286
Primary key id
Services Vector Query API, Web Feature Service (WFS)

NZ Mainland Residential Area Polygons (Topo, 1:50k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3630
1188
Updated
06 Jan 2016

This dataset was last updated on LINZ Data Service on 06 Jan 2016.

The group of houses and their sections that together make up a residential area

Data Dictionary for residential_area_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 325
Data type Vector polygon
Feature count 2254
Primary key t50_fid
Results 111 to 120 of 1719