NZ Geodetic Vertical Marks

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3197
558
Updated
18 Apr 2015

This dataset was last updated on LINZ Data Service on 18 Apr 2015.

This dataset provides information about the position, height, height datum, height accuracy, mark name, mark type, condition and unique four letter identifier for geodetic marks that have an authoritative height in terms of a vertical datum. Heights are in datums defined at www.linz.govt.nz/geodetic/datums-projections-heigh....

All marks will have positions in terms a 3D New Zealand official geodetic datum. The horizontal positions of marks are provided for approximate location purposes only .

This dataset only contains marks that are within the New Zealand mainland and offshore islands. The height data for these marks have been generated using precise levelling from datum tide gauges, or has been acquired by 3rd party sources either as levelling observations or direct heights.

The source data is from Land Information New Zealand's (LINZ) Landonline system where it is used by Land Surveyors. This dataset is updated daily to reflect changes made in the Landonline.

Accuracy

The accuracy of normal-orthometric heights are described by height orders.

For more information see www.linz.govt.nz/geodetic/datums-projections-heigh....

Note the accuracy applies at the time the mark was last surveyed - see the geodetic database for historical information about height coordinates.

Layer ID 784
Data type Vector point
Feature count 52528
Primary key id

NZ WACA Adjustments

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1049
51
Updated
18 Apr 2015

This dataset was last updated on LINZ Data Service on 18 Apr 2015.

This layer provides the extents of the data incorporated into an adjustment which has been completed as a Wide Area Cadastral Adjustment (WACA). These adjustments are undertaken in areas where there is already substantial survey-accurate data, but there are some inconsistencies in the data resulting from small changes to geodetic control coordinates and/or the progressive submission of additional Cadastral Survey Datasets (CSDs). The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be no more than 10cm, as the WACAs target areas where coordinates already have fairly high spatial accuracy.

Layer ID 836
Data type Vector polygon
Feature count 209
Primary key id

NZ Road Centre Line (Electoral)

LINZ / Electoral
Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12412
4077
Updated
18 Apr 2015

This dataset was last updated on LINZ Data Service on 18 Apr 2015.

This source Landonline data exists in order to provide linear geometries against which official road names and street addresses can be recorded. Its purpose is also to enable automated meshblock address reports (for electoral and statistical purposes) so as to identify the presence of a road name in meshblocks where street addresses do not exist.

A road centreline in this layer will typically consist of several road centreline geometries from Landonline that have been associated to the same road name.
In Landonline a road name is commonly assigned to multiple stretches of roading such as between intersections with other roads. A road name is also commonly duplicated across the country e.g. "Queen Street", "High street" etc.

For this layer (as opposed to the Road Subsections Layer. Individual road sections have been aggregated to a single road centreline geometry for each locality. Thus, for example, State Highway 1 has individual sections for differing towns and whenever it crosses a Territorial Authority boundary.

Because some roads have multiple names for part of their lengths, some road centreline geometries will duplicate parts of other roads even though there is in reality only one road formation.

The road centrelines recorded in Landonline do not represent actual road formation, nor do they represent legal access. They must not be considered as topographic, cadastral, or legal.

As a general rule those that are not within a Road Parcels Layer should be treated as being of highly variable accuracy. They do however meet the purposes for which they have been captured, and can provide a valuable resource for other purposes provided that the user(s) understand their origin and consequential limitations.

Warning:
The purpose of the location field is to enable differentiation between roads of the same name in the dataset. It should not be considered official nor part of a valid postal address. It can however be used as an indicative guide to location within a Territorial Authority, or in the case of regional road networks, as an indicative guide to location within New Zealand.

Layer ID 818
Data type Vector multilinestring
Feature count 73349
Primary key id

NZ Property Titles

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1
81716
11437
Updated
18 Apr 2015

This dataset was last updated on LINZ Data Service on 18 Apr 2015.

This layer provides title information (excluding ownership) where there is a data link to one or more primary parcels.

A title is a record of all estates, encumbrances and easements that affect a piece of land. These are now known as Computer Registers incorporating Computer Freehold Registers, Composite Computer Registers, Computer Unit Title Registers and Computer Interest Registers.

This data set removes all ownership fields so that it can be freely distributed. If ownership information is required, the Title & Owners layer and Owners layer; enables this via more restrictive licensing.

An object has been constructed using the parcel shapes where a data link exists. However there can be multiple parcels associated with a title, and a title may only have a part share in a parcel. The constructed shape representing the title will therefore be an aggregation of all parcels that the title is associated with. The ‘spatial extents shared’ attribute when equal to ‘false’ will indicate that title has exclusive interest over all of the shape (this will be case for the vast majority).

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see

Layer ID 804
Data type Vector multipolygon
Feature count 2155419 (incl. 14555 with empty or null geometries)
Primary key id

NZ Strata Parcels

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2843
190
Updated
18 Apr 2015

This dataset was last updated on LINZ Data Service on 18 Apr 2015.

This layer provides the current strata parcel polygons and their associated descriptive data as a single layer to facilitate their use independently of other primary parcels or non primary parcels.

Strata parcels are portions of land where the vertical extent is limited.

The combination of this layer with the primary parcels layer provides all current parcels for New Zealand (i.e. excludes Historic and Pending parcels)

If you require approved or historic parcels see the All Parcels Layer

This layer has a nominal accuracy of 0.1-1m in urban areas and 1-100m in rural areas. For more detailed information about parcel accuracies please refer to the Survey Boundary Marks layer which contains accuracies for each parcel node.

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see

Layer ID 780
Data type Vector multipolygon
Feature count 442
Primary key id

NZ Survey Control Networks

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3826
396
Updated
18 Apr 2015

This dataset was last updated on LINZ Data Service on 18 Apr 2015.

This dataset provides information about the survey control network, position, position accuracy, mark name, mark type, condition and unique four letter code for geodetic marks in terms of New Zealand's official geodetic datum, New Zealand Geodetic Datum 2000 (NZGD2000).

The dataset only contains marks that are within the New Zealand mainland and offshore islands. These positions have been generated using geodetic observations such as precise differential GPS or electronic distance and theodolite angle measurements. The positions are either 2D or 3D depending of the availability of this measurement data.

The source data is from Land Information New Zealand's (LINZ) Landonline system where it is used by Land Surveyors. This dataset is updated daily to reflect changes made in the Landonline.

The mark network is segmented into six control networks which provide control marks for specific purposes. The control_network field within this layer records this network with the 3 or 4 letter abbreviation code as follows:

NRF  - National Reference Frame  
NDMN - National Deformation Monitoring Network  
RDMN - Regional Deformation Monitoring Network  
LDMN - Local Deformation Monitoring Network  
CHN  - Cadastral Horizontal Control Network  
CVN  - Cadastral Vertical Control Network  
BGN  - Basic Geospatial Network  
NHN  - National Height Network

Note a geodetic mark can be in more than network. Also not all geodetic marks are currently associated with a geodetic network. Those that are may be referred to as a control mark. For more information about the control networks refer to www.linz.govt.nz/geodetic/geodetic-programme/surve....

Accuracy

Geodetic marks with a coordinate order of 5 or less have been positioned in terms of NZGD2000. Lower order marks (order 6 and greater) are derived from cadastral surveys, lower accuracy measurement techniques or inaccurate historical datum transformations, and may be significantly less accurate.

The accuracy of NZGD2000 coordinates is described by a series of 'orders' classifications. Positions in terms of NZGD2000 are described by three-dimensional coordinates (latitude, longitude, ellipsoidal height). The accuracy of a survey mark is indicated by its order. Orders are classifications based on the quality of the coordinate in relation to the datum and in relation to other surrounding marks. For more information see www.linz.govt.nz/geodetic/datums-projections-heigh...

Note that the accuracy applies at the time the mark was last surveyed. Refer to the web geodetic database for historical information about mark coordinates.

Note also that the existence of a mark in this dataset does not imply that there is currently a physical mark in the ground - the dataset includes destroyed or lost historical marks. The geodetic database provides more information on the mark status, valid at last time it was visited by LINZ or a maintenance contractor.

Layer ID 786
Data type Vector point
Feature count 25296
Primary key id

NZ Survey Plans

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10864
1275
Updated
18 Apr 2015

This dataset was last updated on LINZ Data Service on 18 Apr 2015.

This layer provides metadata about cadastral surveys along with reference points indicating the location of the survey.

A cadastral survey determines and describes the spatial extent (including boundaries) of interest of land within New Zealand. Each survey is allocated a unique reference number (that prior to Landonline included reference to the land district.

This data provides details that identify the type of survey, the purpose, description and key dates relating to the survey.

Layer ID 794
Data type Vector multipoint
Feature count 1064243
Primary key id

NZ Primary Hydro Parcels

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3415
839
Updated
18 Apr 2015

This dataset was last updated on LINZ Data Service on 18 Apr 2015.

This layer provides the current Hydro parcel polygons with associated descriptive data.

The combination of this layer with the other land parcels and road parcels equates to the primary parcels layer which provides all current parcels for New Zealand (i.e. excludes historic and pending parcels).

This set of three parcel layers (land, road and hydro) enables easy access to the most common groupings of parcel intents (excluding non primary parcels).

If you require approved or historic parcels see the All Parcels Layer

This layer has a nominal accuracy of 0.1-1m in urban areas and 1-100m in rural areas. For more detailed information about parcel accuracies please refer to the Survey Boundary Marks layer which contains accuracies for each parcel node.

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see

Layer ID 771
Data type Vector multipolygon
Feature count 21609
Primary key id

Landonline: Feature Name Point

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

557
72
Updated
11 Apr 2015

This dataset was last updated on LINZ Data Service on 11 Apr 2015.

Please read: This layer is part of the comprehensive Full Landonline Dataset and is designed for use only by data professionals who require the complex version of our property ownership and boundary data for advanced uses.


This layer stores names associated with features and includes Streams, Rivers, Mountains, etc. Its main function is the storage of place name points from NZTopo to enable ad-hoc spatial searches within Landonline.

For full Feature Name data, see the Landonline: Feature Name Polygon layer.

Please refer to the LDS Full Landonline Data Dictionary and Models for detailed metadata about this table.

Layer ID 2017
Data type Vector point
Feature count 57937 (incl. 227 with empty or null geometries)
Primary key id
Services Vector Query API, Web Feature Service (WFS)

NZ Place Names (NZGB)

LINZ / NZ Gazetteer
Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4933
674
Updated
11 Apr 2015

This dataset was last updated on LINZ Data Service on 11 Apr 2015.

The Place Names Gazetteer contains official and unofficial place names under the jurisdiction of the New Zealand Geographic Board Ngā Pou Taunaha o Aotearoa (NZGB). Official place names are those that have been assigned, altered, adopted, approved, and validated under the NZGB Act 2008 or through other statutes that assign official names, for example, Treaty settlement legislation. Unofficial place names are those that have not been processed under the NZGB Act 2008 or through other relevant statutes.

Data is extracted from Land Information New Zealand’s (LINZ) ‘New Zealand Gazetteer of Official Geographic Names’, which is maintained by the NZGB Secretariat.

Geographical coverage encompasses New Zealand, the Ross Dependency of Antarctica, and the Continental Shelf of New Zealand.

The NZGB has naming jurisdiction over:

  • natural features such as mountains, peaks, valleys, glens, forests, lagoons, swamps, creeks, streams, rivers, fords, lakes, glaciers or ice features, bays, islands or harbours (including man-made features of the same type)

  • railways or railway stations, but not railway features such as marshalling yards, transfer sites, or track point locations

  • places, i.e. cities, towns, villages, sites, areas, or similar places, including suburbs and localities

  • undersea features

  • Crown protected areas

  • Districts and regions (altering only if requested by the local authority)

Each name is provided with a location represented by a point. More complex geometry (e.g lines for rivers or areas for suburbs) is not currently available.

Each geographic feature has one or more place names associated with it. Place names usually comprise two components – ‘specific’, being for the proper noun, and ‘generic’, being a description of the geographic feature type.

Information provided for each place name may include: name; name status (whether official or unofficial); geographic feature type; authority by which an official name became official; district within which the name is located; geographic location; reference information; history/origin/meaning; and additional notes. Not all information is available for all names.

Positional accuracy is generally the same as 1:50K mapping. Information accuracy reflects information at the time of original capture.

Layer ID 1681
Data type Vector point
Feature count 50539
Primary key name_id
Results 31 to 40 of 1670