NZ Mainland River Polygons (Topo, 1:50k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4700
1843
Updated
11 Mar 2015

This dataset was last updated on LINZ Data Service on 11 Mar 2015.

A natural, flowing body of water emptying into an ocean, lake or other body of water and usually fed along it's course by converging tributaries.

Data Dictionary for river_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 328
Data type Vector polygon
Feature count 5339
Primary key t50_fid

Depth contour polyline (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5951
774
Updated
17 Dec 2014

This dataset was last updated on LINZ Data Service on 17 Dec 2014.

A line connecting points of equal water depth which is sometimes significantly displaced outside of soundings, symbols and other chart detail for clarity as well as generalization. Depth contours, therefore, often represent an approximate location of the line of equal depth as related to the surveyed line delineated on the source. Also referred to as depth curve.

S-57 Object Class: Depth contour

S-57 Acronym: DEPCNT

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 448
Data type Vector linestring
Feature count 14790
ElevationZ coordinates

Chart NZ 5411 Tauranga Harbour, Katikati Entrance to Mount Maunganui

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6402
292
Updated
25 Sep 2014

This dataset was last updated on LINZ Data Service on 25 Sep 2014.

Raster chart image of: NZ 5411 Tauranga Harbour, Katikati Entrance to Mount Maunganui

This data was compiled for the use at the following scale: 1:40000

File reference: NZ541101

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

Layer ID 1402
Data type Image/Raster
Resolution About 1.697m

NZ Cadastral Survey Network Marks

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5147
693
Updated
18 Apr 2015

This dataset was last updated on LINZ Data Service on 18 Apr 2015.

This layer provides all marks and associated information that have an order of 6 or better.
Cadastral surveys are required to connect to these marks if they are within a specified distance.

A cadastral survey network mark is a node which is (or was) occupied by a physical survey monument that meets accuracy standards suitable for cadastral requirements. i.e. Cadastral Survey Network Marks have a NZGD2000 horizontal coordinate order of 6 or better. The complete definition for these mark orders is defined by the following Standard.
"www.linz.govt.nz/survey-titles/cadastral-surveying..."

When a new cadastral survey network mark is named as part of a cadastral survey dataset (plan) its name consists of a mark type and number that is unique to that survey, followed by the plan number e.g. IS I DP 3456; IS II DP3456.

Layer ID 777
Data type Vector point
Feature count 705348
Primary key id

NZ Place Names (NZGB)

LINZ / NZ Gazetteer
Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5006
683
Updated
11 Apr 2015

This dataset was last updated on LINZ Data Service on 11 Apr 2015.

The Place Names Gazetteer contains official and unofficial place names under the jurisdiction of the New Zealand Geographic Board Ngā Pou Taunaha o Aotearoa (NZGB). Official place names are those that have been assigned, altered, adopted, approved, and validated under the NZGB Act 2008 or through other statutes that assign official names, for example, Treaty settlement legislation. Unofficial place names are those that have not been processed under the NZGB Act 2008 or through other relevant statutes.

Data is extracted from Land Information New Zealand’s (LINZ) ‘New Zealand Gazetteer of Official Geographic Names’, which is maintained by the NZGB Secretariat.

Geographical coverage encompasses New Zealand, the Ross Dependency of Antarctica, and the Continental Shelf of New Zealand.

The NZGB has naming jurisdiction over:

  • natural features such as mountains, peaks, valleys, glens, forests, lagoons, swamps, creeks, streams, rivers, fords, lakes, glaciers or ice features, bays, islands or harbours (including man-made features of the same type)

  • railways or railway stations, but not railway features such as marshalling yards, transfer sites, or track point locations

  • places, i.e. cities, towns, villages, sites, areas, or similar places, including suburbs and localities

  • undersea features

  • Crown protected areas

  • Districts and regions (altering only if requested by the local authority)

Each name is provided with a location represented by a point. More complex geometry (e.g lines for rivers or areas for suburbs) is not currently available.

Each geographic feature has one or more place names associated with it. Place names usually comprise two components – ‘specific’, being for the proper noun, and ‘generic’, being a description of the geographic feature type.

Information provided for each place name may include: name; name status (whether official or unofficial); geographic feature type; authority by which an official name became official; district within which the name is located; geographic location; reference information; history/origin/meaning; and additional notes. Not all information is available for all names.

Positional accuracy is generally the same as 1:50K mapping. Information accuracy reflects information at the time of original capture.

Layer ID 1681
Data type Vector point
Feature count 50539
Primary key name_id

NZ Mainland Lake Polygons (Topo, 1:50k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3777
1799
Updated
11 Mar 2015

This dataset was last updated on LINZ Data Service on 11 Mar 2015.

Any standing body of fresh inland water.

Data Dictionary for lake_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 293
Data type Vector polygon
Feature count 56193
Primary key t50_fid

NZ Mainland Height Points (Topo, 1:50k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4192
1288
Updated
11 Mar 2015

This dataset was last updated on LINZ Data Service on 11 Mar 2015.

A height above a vertical datum, represented on a map by a dot locator with the elevation printed beside the dot. Unlike trigonometrical stations, spot heights are not identifiable on the ground

Data Dictionary for height_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 284
Data type Vector point
Feature count 85658
Primary key t50_fid

Chart NZ 4633 Wellington Harbour

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5779
406
Updated
24 Sep 2014

This dataset was last updated on LINZ Data Service on 24 Sep 2014.

Raster chart image of: NZ 4633 Wellington Harbour

This data was compiled for the use at the following scale: 1:25000

File reference: NZ463301

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

Layer ID 1305
Data type Image/Raster
Resolution About 1.060m

NZ Coastlines and Islands Polygons (Topo 1:50k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4085
1399
Updated
11 Mar 2015

This dataset was last updated on LINZ Data Service on 11 Mar 2015.

This provides a polygon coastline and islands layer which is based on the Topo50 products. It is a combination of the following layers:

Islands from the NZ Island Polygons layer that lie within the NZ Coastline and Chatham Islands areas (i.e. islands in lakes, rivers and estuaries) have been removed.

The GIS workflow to create the layer is:

  1. NZ Coastlines were converted from a polyline to a polygon using a polyline to polygon tool.
  2. The resulting coastal polygon was then used as an input into an erase tool and run against the NZ Island Polygon layer to remove all islands lying within the NZ Mainland and Stewart Island.
  3. This was then merged with the NZ Chatham Is island polygons (Topo, 1:50k) that have had the islands within the main island polygon removed, NZ Auckland Is Island Polygons (Topo, 1:50k), NZ Campbell Is / Motu Ihupuku Island, NZ Antipodes Is Island Polygons (Topo, 1:25k), NZ Kermadec Is Island Polygons (Topo, 1:25k), NZ Bounty Is Island Polygons (Topo, 1:25k) and NZ Snares Is / Tini Heke Island Polygons (Topo, 1:25k) layers using a merge tool.
  4. Lake Onoke from the NZ Lake Polygons (Topo 1:50k) layer and Te Whanga Lagoon from the NZ Chatham Is lagoon polygons (Topo, 1:50k) layer were then erased from the resultant polygon layer to include these two water bodies in the coastline definition.

For more detailed description of each layer refer to the layer urls above.

Layer ID 1153
Data type Vector multipolygon
Feature count 9306

Chart NZ 4314 Manukau Harbour

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5678
245
Updated
22 Dec 2014

This dataset was last updated on LINZ Data Service on 22 Dec 2014.

Raster chart image of: NZ 4314 Manukau Harbour

This data was compiled for the use at the following scale: 1:48000

File reference: NZ4314

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

Layer ID 1296
Data type Image/Raster
Resolution About 2.036m
Results 71 to 80 of 1668