NZ Place Names (NZGB)

LINZ / NZ Gazetteer
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

16689
2292
Updated
21 May 2018

This dataset was last updated on LINZ Data Service on 21 May 2018.

The Place Names Gazetteer contains official and unofficial place names under the jurisdiction of the New Zealand Geographic Board Ngā Pou Taunaha o Aotearoa (NZGB). Official place names are those that have been assigned, altered, adopted, approved, and validated under the NZGB Act 2008 or through other statutes that assign official names, for example, Treaty settlement legislation. Unofficial place names are those that have not been processed under the NZGB Act 2008 or through other relevant statutes.

Data is extracted from Land Information New Zealand’s (LINZ) ‘New Zealand Gazetteer of Official Geographic Names’, which is maintained by the NZGB Secretariat.

Geographical coverage encompasses New Zealand, the Ross Dependency of Antarctica, and the Continental Shelf of New Zealand.

The NZGB has naming jurisdiction over:

  • natural features such as mountains, peaks, valleys, glens, forests, lagoons, swamps, creeks, streams, rivers, fords, lakes, glaciers or ice features, bays, islands or harbours (including man-made features of the same type)

  • railways or railway stations, but not railway features such as marshalling yards, transfer sites, or track point locations

  • places, i.e. cities, towns, villages, sites, areas, or similar places, including suburbs and localities

  • undersea features

  • Crown protected areas

  • Districts and regions (altering only if requested by the local authority)

Each name is provided with a location represented by a point. More complex geometry (e.g lines for rivers or areas for suburbs) is not currently available.

Each geographic feature has one or more place names associated with it. Place names usually comprise two components – ‘specific’, being for the proper noun, and ‘generic’, being a description of the geographic feature type.

Information provided for each place name may include: name; name status (whether official or unofficial); geographic feature type; authority by which an official name became official; district within which the name is located; geographic location; reference information; history/origin/meaning; and additional notes. Not all information is available for all names.

Positional accuracy is generally the same as 1:50K mapping. Information accuracy reflects information at the time of original capture.

Layer ID 51681
Data type Vector point
Feature count 52290
Primary key name_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

NZ Roads Subsections (Addressing)

LINZ / Addressing
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4763
1068
Updated
20 May 2018

This dataset was last updated on LINZ Data Service on 20 May 2018.

Please read: This layer provides linear geometries against which official road names and street addresses can be recorded. Its purpose is also to enable automated meshblock address reports (for electoral and statistical purposes) so as to identify the presence of a road name in meshblocks where street addresses do not exist.

A linear geometry in this layer will consist of the individual road section geometries (as opposed to the NZ Roads (Addressing) layer where these have been aggregated). This layer has been simplified from LINZ’s NZ Roads database, a centralised database for the management of national road data. The comprehensive set of NZ Roads tables is also available.

These road centrelines do not represent actual road formation, nor do they represent legal access. They must not be considered as topographic, cadastral, or legal.

Some road sections have multiple names; in these cases the non-primary road names are held in additional columns against each road section.

This layer contains the core attributes of a road section to support simple searching with locality and territorial authority or provide a road name context for cadastral data views. This layer is a replacement for the NZ Road Centre Line Subsections (Electoral) layer.

The Electoral road and address datasets will be available until May 2017 to allow users further time to transition.

Please refer to the NZ Roads Data Dictionary for detailed metadata and information about this layer.

Layer ID 53383
Data type Vector multilinestring
Feature count 242686
Primary key road_section_geometry_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

AIMS: Address Position

LINZ / Addressing
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6685
836
Updated
20 May 2018

This dataset was last updated on LINZ Data Service on 20 May 2018.

Please read: The AIMS: Address Position table is part of the set of comprehensive AIMS Address tables.

The Address Position table contains the point location of an address. An address can have multiple point positions. The Addresspositiontype describes the position E.g. centroid, set back from road. In the first instance the Landonline address position will be used the positioning of this is 'unknown'. Additional Address Position data may be captured over time.

The comprehensive address dataset includes eight data tables and nine lookup tables. The dataset has been sourced from LINZ’s Address Information Management System (AIMS), a centralised database for the management of national addresses, including for electoral purposes. This set of normalised tables replaces the single Landonline: Street Address layer currently published on LDS.

This layer contains information advised to LINZ by Territorial Authorities (TAs). Under the Local Government Act 1974 (section 319) it is the responsibility of the TAs to advise LINZ (the Surveyor General) of all allocated addresses in their district.

For a simplified version of the data contained within these tables see NZ Street Address.

Please refer to the Street Address Data Dictionary for detailed metadata and information about this layer.

Layer ID 53355
Data type Vector point
Feature count 2033211
Primary key address_position_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Roads: Road Section Geometry

LINZ / Addressing
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7625
1687
Updated
20 May 2018

This dataset was last updated on LINZ Data Service on 20 May 2018.

Please read: This is the table for Road Section Geometry, which is part of the set of NZ Roads tables. The Road Section Geometry table stores the linear geometry for the associated road section, or part of the associated road section.

The NZ Roads dataset includes eight data tables and eleven lookup tables. The dataset has been sourced from LINZ’s NZ Roads database, a database for the management of national roads, including those managed for addressing purposes. This set of normalised tables replaces the Landonline: Road Centre Line layer and the Landonline: Road Name and Landonline: Road Name Association tables currently published on LDS.

These centrelines are required to indicate the presence of an authoritative road name. Named centrelines are not intended to represent the exact location of a road formation. Named centrelines do not indicate the presence of legal access.

For a simplified version of the data contained within these tables see NZ Roads (Addressing), which aggregates geometries based on road name, and NZ Roads Subsections (Addressing), which holds the individual geometries.

Please refer to the NZ Roads Data Dictionary for detailed metadata and information about this layer.

Layer ID 53378
Data type Vector multilinestring
Feature count 315206
Primary key road_section_geometry_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Street Address

LINZ / Addressing
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

27337
4453
Updated
20 May 2018

This dataset was last updated on LINZ Data Service on 20 May 2018.

Please read:This layer provides all allocated addresses as advised to LINZ by Territorial Authorities (TAs). Under the Local Government Act 1974 (section 319) it is the responsibility of the TAs to advise LINZ (the Surveyor General) of all allocated addresses in their district.


Local Government Act 1974
319B Allocation of property numbers
(1) For electoral, postal, and other purposes the council may allocate a number to any area of land or building or part of a building within its district and may change the number allocated to any such area of land or building.
(2) The council shall comply with any request from a Chief Surveyor to allocate a number to or change the number of any area of land or building or part of a building in its district.
(3) The principal administrative officer shall advise the Chief Surveyor of the land district in which the land or building is situated of the numbers allocated under subsection (1) or subsection (2).


This dataset contains the core components of an address to support simple searching or use of this layer to provide context and is a replacement for the NZ Street Address (Electoral) dataset. This dataset has been sourced from LINZ’s Address Information Management System (AIMS), a centralised database for the management of national addresses, including for electoral purposes.

The existing address and road datasets will be available for 6 months after AIMS go-live to allow users further time to transition.This version will be replacing NZ Street Address (Electoral) dataset.

Please refer to the Street Address Data Dictionary for detailed metadata and information about this layer.

For a comprehensive group of address tables see AIMS: Street Address.

Layer ID 53353
Data type Vector point
Feature count 2018898
Primary key address_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Roads (Addressing)

LINZ / Addressing
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1
5512
1222
Updated
20 May 2018

This dataset was last updated on LINZ Data Service on 20 May 2018.

Please read: This layer provides linear geometries against which official road names and street addresses can be recorded. Its purpose is also to enable automated meshblock address reports (for electoral and statistical purposes) so as to identify the presence of a road name in meshblocks where street addresses do not exist.

For this layer (as opposed to the NZ Roads Subsections (Addressing) layer, individual road section geometries have been aggregated to a single road centreline geometry where those subsections share the same name, and are generally contiguous. Because some roads have multiple names for part of their lengths, some road centreline geometries will duplicate parts of other roads even though there is in reality only one road formation. This layer has been simplified from LINZ’s NZ Roads dataset, a centralised database for the management of national road data. The comprehensive set of NZ Roads tables is also available.

These road centrelines do not represent actual road formation, nor do they represent legal access. They must not be considered as topographic, cadastral, or legal.

This layer contains the core attributes of a road to support simple searching or provide a road name context for cadastral data views. This dataset is a replacement for the NZ Road Centre Line (Electoral) dataset.

The Electoral road and address datasets will be available until May 2017 to allow users further time to transition.

Please refer to the NZ Roads Data Dictionary for detailed metadata and information about this layer.

Layer ID 53382
Data type Vector multilinestring
Feature count 75559
Primary key road_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ WACA Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2107
68
Updated
18 May 2018

This dataset was last updated on LINZ Data Service on 18 May 2018.

This layer provides the extents of the data incorporated into an adjustment which has been completed as a Wide Area Cadastral Adjustment (WACA). These adjustments are undertaken in areas where there is already substantial survey-accurate data, but there are some inconsistencies in the data resulting from small changes to geodetic control coordinates and/or the progressive submission of additional Cadastral Survey Datasets (CSDs). The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be no more than 10cm, as the WACAs target areas where coordinates already have fairly high spatial accuracy.

Layer ID 50836
Data type Vector polygon
Feature count 228
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ SPI Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2067
71
Updated
18 May 2018

This dataset was last updated on LINZ Data Service on 18 May 2018.

This layer provides the extents of the data incorporated into an adjustment which has been completed as part of the Spatial Parcel Improvement (SPI) project. The SPI project aims to improve the accuracy of digital cadastral data in areas (primarily rural) where survey-accurate data does not currently exist. The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be at least several metres, as the SPI project targets areas where significant movements are expected.

Layer ID 50835
Data type Vector polygon
Feature count 394
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Arc Chords

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2339
104
Updated
18 May 2018

This dataset was last updated on LINZ Data Service on 18 May 2018.

This layer provides all authoritative arc survey observations and is targeted at cadastral surveyors.

Only observations that have been captured in Landonline are available. This includes vectors that were re-captured in the Survey Capture Areas from survey plans lodged prior to Landonline and all survey observations since.

Individual cadastral surveys will commonly re-measure or re-use cadastral lines. Often they will be the same, however as the accuracy capability has increased over time, differences between 'old' and 'new' observations are more likely. Thus all survey observations include the reference to the Survey Plan.

Layer ID 50778
Data type Vector linestring
Feature count 305484
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Observations (Cadastral)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5549
1068
Updated
18 May 2018

This dataset was last updated on LINZ Data Service on 18 May 2018.

This layer provides all authoritative bearing and distance survey observations which form part of the cadastral survey dataset

Only observations that have been captured in Landonline are available. This includes observations that were re-captured in the Survey Capture Areas from survey plans lodged prior to Landonline and all survey observations since.

Individual cadastral surveys will commonly re-measure or re-use cadastral lines. Often they will be the same, however as the accuracy capability has increased over time, differences between 'old' and 'new' observations are more likely. Thus all survey observations include the reference to the survey plan.

This dataset only contains right-line survey observations. A small fraction of the total number of survey observations are defined as arcs and are provided via the Survey Arc Chords layer.

Layer ID 51694
Data type Vector linestring
Feature count 40963107
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 1852