NZ Airborne Gravity Free-Air Anomalies at Ground Surface (2013-2014)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

14152
104
Updated
30 Jan 2017

This dataset was last updated on LINZ Data Service on 30 Jan 2017.

Introduction
This dataset provides a 1 arc minute raster image of the free-air gravity anomalies, which have been downward continued to the ground surface (McCubbine et al, 2017).

Description
Gravity anomalies are differences between measured gravity (from the airborne gravity dataset) and an ellipsoidal model of the Earth’s gravity field (GRS80). Gravity anomalies correspond to un-modelled density variations within the Earth’s crust and upper mantle. They are used to investigate concealed geological structures and for quasigeoid modelling.

These free-air anomalies show values which include gravitation impact of the topography.

The national airborne gravity dataset is comprised of more than 50,000 linear km of flight observations, covering the three main islands of New Zealand and up to 10km offshore.

As the airborne gravity dataset was measured at flight altitude, the observations have been reduced to the ground surface (a process known as downward continuation).

The national airborne gravity dataset was collected as a joint project between Land Information New Zealand (LINZ), GNS Science (GNS) and Victoria University of Wellington (VUW). The airborne survey was completed in a total of eight months, over two campaigns: August – October 2013, and February – June 2014.

Users may also be interested other layers created for Bouguer anomalies at ground surface and the along track observations from the gravity flight lines at flight elevation NZ Airborne Gravity Bouguer Anomalies at Ground Surface (2013-2014) and NZ Airborne Gravity Flight Lines at Elevation (2013-2014).

McCubbine, J. Stagpoole, V. Caratori-Tontini, F. Amos, M. Smith, E. and Winefield, R. (2017). Gravity anomaly grids for the New Zealand region. Manuscript submitted for publication New Zealand Journal of Geology and Geophysics.

Layer ID 53532
Data type Grid
Resolution About 1579.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Moturiki 1953 to NZGD2000 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

26644
85
Updated
02 Aug 2016

This dataset was last updated on LINZ Data Service on 02 Aug 2016.

The MOT53-NZGD2000 grid enables the conversion of normal-orthometric heights from the Moturiki 1953 local vertical datum directly to New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights.

MOT53-NZGD2000 is published on a one arc-minute grid (approximately 1.8 kilometres) extending over the benchmarks that nominally define the extent of the Moturiki 1953 vertical datum (174.5° E to 178.26° E, 36.5° S to 40.7° S).

The conversion value is represented by the attribute “delta”, in metres.

This grid is a combination of New Zealand Quasigeoid 2016 NZGeoid2016 and the MOT53-NZVD2016 height conversion grid. Where NZGeoid2016 is the reference surface for the New Zealand Vertical Datum 2016 (NZVD2016), while the MOT53-NZVD2016 grid models the difference between the Moturiki 1953 vertical datum and NZVD2016 using the LINZ GPS-levelling marks.

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53433
Data type Vector point
Feature count 57937
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Canterbury Earthquake (14 Feb 2016) Geodetic Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

24803
93
Updated
20 Jun 2016

This dataset was last updated on LINZ Data Service on 20 Jun 2016.

Coordinates computed from surveys undertaken after the 14 February 2016 Canterbury earthquake. These should be consistent with any observations made after this earthquake (neglecting any localised deformation such as that due to liquefaction).

For further information about this dataset, see the Canterbury earthquake information.

These coordinates are only provisional. Analysis is ongoing as further data is collected. Coordinates were calculated using SNAP v2.5.33. Stations were constrained using coordinates of distant PositioNZ continuous GNSS stations that were unaffected by the earthquake.

The standard deviations of coordinates are 0.01m horizontally and 0.02m vertically, relative to the PositioNZ network.

Coordinate changes due to the earthquake have been calculated by comparing pre and post-earthquake coordinates. Pre-earthquake coordinates were calculated relative to public and private continuous GNSS stations. These continuous GNSS stations had data processed for several days early in 2016 (before the earthquake). Other pre-earthquake geodetic data was then readjusted with the continuous GNSS data. Note that this means these coordinate changes may differ slightly from those that would be calculated by comparing the post-earthquake coordinates with those currently in the Geodetic Database.

These coordinates are suitable for use in surveys and other geospatial activities in Canterbury and Christchurch.

Layer ID 53322
Data type Vector point
Feature count 149
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Nelson 1955 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

24248
108
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The NSN55-NZVD2016 grid enables the conversion of normal-orthometric heights from the Nelson 1955 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

NSN55-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Nelson 1955 vertical datum (171.3° E to 174.4° E, 40.4° S to 42.7° S).

The height conversion grid models the difference between the Nelson 1955 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of NSN55-NZVD2016 is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53438
Data type Vector point
Feature count 6580
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Auckland 1946 to NZVD2016 Conversion Raster

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8403
60
Added
07 Oct 2019

This dataset was first added to LINZ Data Service on 07 Oct 2019.

The Auckland 1946 to NZVD2016 Conversion Raster provides users with a two arc-minute (approximately 3.6 kilometres) raster image of the conversion of normal-orthometric heights from the Auckland 1946 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.
This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

The height conversion grid models the difference between the Auckland 1946 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 103953
Data type Grid
Resolution About 3311.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Airborne Gravity Bouguer Anomalies at Ground Surface (2013-2014)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

16694
150
Updated
30 Jan 2017

This dataset was last updated on LINZ Data Service on 30 Jan 2017.

The national airborne gravity dataset is comprised of more than 50,000 linear km of flight observations, covering the three main islands of New Zealand and up to 10km offshore.

This dataset provides a 1 arc minute raster image of the Bouguer anomalies, which have been downward continued to the ground surface (McCubbine et al, 2017).

The national airborne gravity dataset was collected as a joint project between Land Information New Zealand (LINZ), GNS Science (GNS) and Victoria University of Wellington (VUW). The airborne survey was completed in a total of eight months, over two campaigns: August – October 2013, and February – June 2014.

Users may also be interested in other layers created for the free-air anomalies at ground surface and the along track observations from the gravity flight lines at flight elevation NZ Airborne Gravity Free-Air Anomalies at Ground Surface (2013-2014) and NZ Airborne Gravity Flight Lines at Elevation (2013-2014).

McCubbine, J. Stagpoole, V. Caratori-Tontini, F. Amos, M. Smith, E. and Winefield, R. (2017). Gravity anomaly grids for the New Zealand region. Manuscript submitted for publication New ZealandJournal of Geology and Geophysics.

Layer ID 53530
Data type Grid
Resolution About 1579.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Stewart Island 1977 to NZVD2016 Conversion Raster

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7747
17
Added
03 Oct 2019

This dataset was first added to LINZ Data Service on 03 Oct 2019.

The Stewart Island 1977 to NZVD2016 Conversion Raster provides users with a two arc-minute (approximately 3.6 kilometres) raster image of the conversion of normal-orthometric heights from the Stewart Island 1977 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.
This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

The height conversion grid models the difference between the Stewart Island 1977 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 103945
Data type Grid
Resolution About 3061.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Bluff 1955 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

22014
29
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The BLF55-NZVD2016 grid enables the conversion of normal-orthometric heights from the Bluff 1955 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

BLF55-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Bluff 1955 vertical datum (168.2° E to 168.9° E, 46.3° S to 46.8° S).

The height conversion grid models the difference between the Bluff 1955 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of BLF55-NZVD2016 is better than 3 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53424
Data type Vector point
Feature count 352
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Taranaki 1970 to NZGD2000 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

22050
36
Updated
09 Aug 2016

This dataset was last updated on LINZ Data Service on 09 Aug 2016.

The TNK70-NZGD2000 grid enables the conversion of normal-orthometric heights from the Taranaki 1970 local vertical datum directly to New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights.

TNK70-NZGD2000 is published on a one arc-minute grid (approximately 1.8 kilometres) extending over the benchmarks that nominally define the extent of the Taranaki 1970 vertical datum (173.6° E to 176.4° E, 38.3° S to 41.1° S).
The conversion value is represented by the attribute “delta”, in metres.

This grid is a combination of New Zealand Quasigeoid 2016 NZGeoid2016 and the TNK70-NZVD2016 height conversion grid. Where NZGeoid2016 is the reference surface for the New Zealand Vertical Datum 2016 (NZVD2016), while the TNK70-NZVD2016 grid models the difference between the Taranaki 1970 vertical datum and NZVD2016 using the LINZ GPS-levelling marks.

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53443
Data type Vector point
Feature count 28561
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Napier 1962 to NZGD2000 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

22370
29
Updated
09 Aug 2016

This dataset was last updated on LINZ Data Service on 09 Aug 2016.

The NPR62-NZGD2000 grid enables the conversion of normal-orthometric heights from the Napier 162 ocal vertical datum directly to New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights.

NPR62-NZGD2000 is published on a one arc-minute grid (approximately 1.8 kilometres) extending over the benchmarks that nominally define the extent of the Napier 1962 vertical datum (175.6° E to 177.9° E, 38.6° S to 40.6° S).

The conversion value is represented by the attribute “delta”, in metres.

This grid is a combination of New Zealand Quasigeoid 2016 NZGeoid2016 and the NPR62-NZVD2016 height conversion grid. Where NZGeoid2016 is the reference surface for the New Zealand Vertical Datum 2016 (NZVD2016), while the NPR62-NZVD2016 grid models the difference between the Napier 1962 vertical datum and NZVD2016 using the LINZ GPS-levelling marks.

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53435
Data type Vector point
Feature count 16819
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 31 to 40 of 61