Wellington 1953 to NZVD2016 Conversion Raster

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11194
83
Added
07 Oct 2019

This dataset was first added to LINZ Data Service on 07 Oct 2019.

The Wellington 1953 to NZVD2016 Conversion Raster provides users with a two arc-minute (approximately 3.6 kilometres) raster image of the conversion of normal-orthometric heights from the Wellington 1953 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.
This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

The height conversion grid models the difference between the Wellington 1953 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 103964
Data type Grid
Resolution About 3236.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Lyttelton 1937 to NZGD2000 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

23578
51
Updated
02 Aug 2016

This dataset was last updated on LINZ Data Service on 02 Aug 2016.

The LTN37-NZGD2000 grid enables the conversion of normal-orthometric heights from the Lyttelton 1937 local vertical datum directly to New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights.

LTN37-NZGD2000 is published on a one arc-minute grid (approximately 1.8 kilometres) extending over the benchmarks that nominally define the extent of the Lyttelton 1937 vertical datum (168.53° E to 174.2° E, 41.3° S to 45.1° S).

The conversion value is represented by the attribute “delta”, in metres.

This grid is a combination of New Zealand Quasigeoid 2016 NZGeoid2016 and the LTN37-NZVD2016 height conversion grid. Where NZGeoid2016 is the reference surface for the New Zealand Vertical Datum 2016 (NZVD2016), while the LTN37-NZVD2016 grid models the difference between the Lyttelton 1937 vertical datum and NZVD2016 using the LINZ GPS-levelling marks.

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53431
Data type Vector point
Feature count 78547
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Dunedin 1958 to NZGD2000 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

23297
55
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The DUN58-NZGD2000 grid enables the conversion of normal-orthometric heights from the Dunedin 1958 local vertical datum directly to New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights.

DUN58-NZGD2000 is published on a one arc-minute grid (approximately 1.8 kilometres) extending over the benchmarks that nominally define the extent of the Dunedin 1958 vertical datum (168.4° E to 171.3° E, 43.9° S to 46.5° S).

The conversion value is represented by the attribute “delta”, in metres.

This grid is a combination of New Zealand Quasigeoid 2016 NZGeoid2016 and the DUN58-NZVD2016 height conversion grid. Where NZGeoid2016 is the reference surface for the New Zealand Vertical Datum 2016 (NZVD2016), while the DUN58-NZVD2016 grid models the difference between the Dunedin 1958 vertical datum and NZVD2016 using the LINZ GPS-levelling marks.

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53427
Data type Vector point
Feature count 27475
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZGD2000 deformation model version 2013-08-01 reverse patch coordinate shifts filled contours

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

23243
56
Updated
14 Jun 2013

This dataset was last updated on LINZ Data Service on 14 Jun 2013.

The deformation model associated with the NZGD2000 datum was updated, nominally at 1 August 2013. The actual update of LINZ data took place on 14-15 December 2013. This update involved reverse patches, which means that the "reference coordinates" of features were updated. The main updates relate to the Christchurch earthquakes. The patch also updated coordinates affected by other South Island earthquakes since 2000.

These updates have been incorporated into Landonline and resulted in spatial updates to all features in the affected areas.

This data set contains contours indicating the extent and magnitude of the coordinate changes to assist in assessing the impact of this update on client data sets. This dataset is also available as a polyline.

For more information see here

Layer ID 51685
Data type Vector multipolygon
Feature count 7
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Taranaki 1970 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

27490
56
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The TNK70-NZVD2016 grid enables the conversion of normal-orthometric heights from the Taranaki 1970 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

TNK70-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Taranaki 1970 vertical datum (173.6° E to 176.4° E, 38.3° S to 41.1° S).

The height conversion grid models the difference between the Taranaki 1970 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of TNK70-NZVD2016 is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53444
Data type Vector point
Feature count 7225
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Airborne Gravity Flight Lines at Elevation (2013-2014)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

27025
75
Updated
30 Jan 2017

This dataset was last updated on LINZ Data Service on 30 Jan 2017.

Introduction
This dataset provides gravity observations, reductions and metadata for New Zealand’s national airborne gravity survey at flight elevation. A full description of each field in this dataset is available in the accompanying pdf NZ Airborne Gravity Flight Lines at Elevation (2013-2014) Description.

Description
New Zealand’s national airborne gravity dataset is comprised of more than 50,000 linear km of flight observations, covering the three main islands of New Zealand and up to 10km offshore.

Gravity observations can be used to compute gravity anomalies: differences between measured gravity and an ellipsoidal model of the Earth’s gravity field. Gravity anomalies correspond to un-modelled density variations within the Earth’s crust and upper mantle. They are used to investigate concealed geological structures and for quasigeoid modelling.

The national airborne gravity dataset was collected as a joint project between Land Information New Zealand (LINZ), GNS Science (GNS) and Victoria University of Wellington (VUW). The airborne survey was completed in a total of eight months, over two campaigns: August – October 2013, and February – June 2014.

Users may also be interested raster layers created for each of the free-Air and Bouguer Anomalies which have been downward continued to ground surface NZ Airborne Gravity Free-Air Anomalies at Ground Surface (2013-2014) and NZ Airborne Gravity Bouguer Anomalies at Ground Surface (2013-2014).

Layer ID 53531
Data type Vector point
Feature count 947685
Dimensions Z (Ellipsoidal_Height)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Napier 1962 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

24218
97
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The NPR62-NZVD2016 grid enables the conversion of normal-orthometric heights from the Napier 1962 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

NPR62-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Napier 1962 vertical datum (175.6° E to 177.9° E, 38.6° S to 40.6° S).

The height conversion grid models the difference between the Napier 1962 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of NPR62-NZVD2016 is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53436
Data type Vector point
Feature count 4270
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

One Tree Point 1964 to NZGD2000 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

23590
47
Updated
09 Aug 2016

This dataset was last updated on LINZ Data Service on 09 Aug 2016.

The OTP64-NZGD2000 grid enables the conversion of normal-orthometric heights from the One Tree Point 1964 local vertical datum directly to New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights.

OTP64-NZGD2000 is published on a one arc-minute grid (approximately 1.8 kilometres) extending over the benchmarks that nominally define the extent of the One Tree Point 1964 vertical datum (172.6° E to 175.0° E, 34.3° S to 36.8° S).
The conversion value is represented by the attribute “delta”, in metres.

This grid is a combination of New Zealand Quasigeoid 2016 NZGeoid2016 and the OTP64-NZVD2016 height conversion grid. Where NZGeoid2016 is the reference surface for the New Zealand Vertical Datum 2016 (NZVD2016), while the OTP64-NZVD2016 grid models the difference between the One Tree Point 1964 vertical datum and NZVD2016 using the LINZ GPS-levelling marks.

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53439
Data type Vector point
Feature count 21895
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Stewart Island 1977 to NZGD2000 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

26361
21
Updated
09 Aug 2016

This dataset was last updated on LINZ Data Service on 09 Aug 2016.

The STI77-NZGD2000 grid enables the conversion of normal-orthometric heights from the Stewart Island 1977 local vertical datum directly to New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights.

STI77-NZGD2000 is published on a one arc-minute grid (approximately 1.8 kilometres) extending over the benchmarks that nominally define the extent of the Stewart Island 1977 vertical datum (167.2° E to 168.8° E, 46.5° S to 47.5° S).
The conversion value is represented by the attribute “delta”, in metres.

This grid is a combination of New Zealand Quasigeoid 2016 NZGeoid2016 and the STI77-NZVD2016 height conversion grid. Where NZGeoid2016 is the reference surface for the New Zealand Vertical Datum 2016 (NZVD2016), while the STI77-NZVD2016 grid models the difference between the Stewart Island 1977 vertical datum and NZVD2016 using the LINZ GPS-levelling marks.

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53441
Data type Vector point
Feature count 5917
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Bluff 1955 to NZGD2000 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

22665
18
Updated
02 Aug 2016

This dataset was last updated on LINZ Data Service on 02 Aug 2016.

The BLF55-NZGD2000 grid enables the conversion of normal-orthometric heights from the Bluff 1955 local vertical datum directly to New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights.

BLF55-NZGD2000 is published on a one arc-minute grid (approximately 1.8 kilometres) extending over the benchmarks that nominally define the extent of the Bluff 1955 vertical datum (168.2° E to 168.9° E, 46.3° S to 46.8° S).

The conversion value is represented by the attribute “delta”, in metres.

This grid is a combination of New Zealand Quasigeoid 2016 NZGeoid2016 and the BLF55-NZVD2016 height conversion grid. Where NZGeoid2016 is the reference surface for the New Zealand Vertical Datum 2016 (NZVD2016), while the BLF55-NZVD2016 grid models the difference between the Bluff 1955 vertical datum and NZVD2016 using the LINZ GPS-levelling marks.

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53423
Data type Vector point
Feature count 1333
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 51 to 60 of 61