NZ Christchurch Post-EQ Survey-Accurate (SDC) Boundary Coordinates

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5528
471
Added
22 Feb 2015

This dataset was first added to LINZ Data Service on 22 Feb 2015.

For further information about this dataset, see the Canterbury earthquake information.

Coordinates computed by adding the effects of deep-seated movement to survey points that had authoritative survey-accurate digital cadastre (SDC) coordinates immediately prior to 4 September 2010 (the first Canterbury earthquake). Marks that did not have SDC status at that time are not included in the dataset. Deep-seated movements were evaluated using the NZGD2000 deformation model.

  • The 'nod_id' column is the Landonline node id. This is the unique identifier for the mark.
  • The 'current_name' column is the Landonline mark name. Many boundary marks do not have a name recorded in this dataset, because this information has not been digitally captured.
  • The 'east_mtpleatm2000' and 'north_mtpleatm2000' columns are the east and north coordinates (metres) in terms of the Mt Pleasant 2000 transverse mercator projection. Rounded to the nearest centimetre.
  • The 'coord_order' column is the Landonline coordinate order immediately prior to 4 September 2010.

The estimated absolute uncertainty of these coordinates is 0.09m at the 95% confidence level.

These coordinates are intended for the use of Licensed Cadastral Surveyors when locating boundaries in Christchurch, in accordance with the Rules for Cadastral Survey 2010 and associated guidance, particularly guidance relating to the earthquakes.

Layer ID 52350
Data type Vector point
Feature count 415489
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Christchurch Post-EQ Survey-Accurate (SDC) Non-Boundary Coordinates

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5629
590
Added
22 Feb 2015

This dataset was first added to LINZ Data Service on 22 Feb 2015.

For further information about this dataset, see the Canterbury earthquake information.

Coordinates computed by adding the effects of deep-seated movement to survey points that had authoritative survey-accurate digital cadastre (SDC) coordinates immediately prior to 4 September 2010 (the first Canterbury earthquake). Marks that did not have SDC status at that time are not included in the dataset. Deep-seated movements were evaluated using the NZGD2000 deformation model.

  • The 'nod_id' column is the Landonline node id. This is the unique identifier for the mark.
  • The 'current_name' column is the Landonline mark name.
  • The 'east_mtpleatm2000' and 'north_mtpleatm2000' columns are the east and north coordinates (metres) in terms of the Mt Pleasant 2000 transverse mercator projection. Rounded to the nearest centimetre.
  • The 'coord_order' column is the Landonline coordinate order immediately prior to 4 September 2010.

The estimated absolute uncertainty of these coordinates is 0.09m at the 95% confidence level.

These coordinates are intended for the use of Licensed Cadastral Surveyors when locating boundaries in Christchurch, in accordance with the Rules for Cadastral Survey 2010 and associated guidance, particularly guidance relating to the earthquakes.

Layer ID 52349
Data type Vector point
Feature count 50181
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Observations (Cadastral)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8009
1528
Updated
16 Jun 2019

This dataset was last updated on LINZ Data Service on 16 Jun 2019.

This layer provides all authoritative bearing and distance survey observations which form part of the cadastral survey dataset

Only observations that have been captured in Landonline are available. This includes observations that were re-captured in the Survey Capture Areas from survey plans lodged prior to Landonline and all survey observations since.

Individual cadastral surveys will commonly re-measure or re-use cadastral lines. Often they will be the same, however as the accuracy capability has increased over time, differences between 'old' and 'new' observations are more likely. Thus all survey observations include the reference to the survey plan.

This dataset only contains right-line survey observations. A small fraction of the total number of survey observations are defined as arcs and are provided via the Survey Arc Chords layer.

Layer ID 51694
Data type Vector linestring
Feature count 43066928
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ SPI Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3935
79
Updated
16 Jun 2019

This dataset was last updated on LINZ Data Service on 16 Jun 2019.

This layer provides the extents of the data incorporated into an adjustment which has been completed as part of the Spatial Parcel Improvement (SPI) project. The SPI project aims to improve the accuracy of digital cadastral data in areas (primarily rural) where survey-accurate data does not currently exist. The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be at least several metres, as the SPI project targets areas where significant movements are expected.

Layer ID 50835
Data type Vector polygon
Feature count 394
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ WACA Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3931
71
Updated
16 Jun 2019

This dataset was last updated on LINZ Data Service on 16 Jun 2019.

This layer provides the extents of the data incorporated into an adjustment which has been completed as a Wide Area Cadastral Adjustment (WACA). These adjustments are undertaken in areas where there is already substantial survey-accurate data, but there are some inconsistencies in the data resulting from small changes to geodetic control coordinates and/or the progressive submission of additional Cadastral Survey Datasets (CSDs). The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be no more than 10cm, as the WACAs target areas where coordinates already have fairly high spatial accuracy.

Layer ID 50836
Data type Vector polygon
Feature count 228
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Boundary Vectors

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

24252
5483
Updated
16 Jun 2019

This dataset was last updated on LINZ Data Service on 16 Jun 2019.

This layer provides the latest bearing (direction) and/or distance for cadastral boundaries.

When a cadastral survey is undertaken the relationship between boundary and non-boundary marks is ascertained or measured.
• This commonly is in the form or a vector (bearing and distance), but occasionally just one component.
• Some relationships are defined as arcs. In this data layer, the arc length is recorded in the distance field and a separate record holds the chord.

Only observations that have been captured in Landonline are available. This includes vectors that were re-captured in the Survey Capture Areas from survey plans lodged prior to Landonline and all survey observations since.

Layer ID 50820
Data type Vector linestring
Feature count 8646569
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Boundary Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

51315
5228
Updated
16 Jun 2019

This dataset was last updated on LINZ Data Service on 16 Jun 2019.

This layer provides the latest captured boundary mark information that defines existing parcel boundaries and associated information such as the mark name.

A boundary mark is on a node which defines the boundaries of primary parcels or non primary parcels.

Not all boundary points have a physical monument (e.g. a peg) placed. In this case the boundary mark is recorded as “unmarked”

This dataset extends the Landonline stored data by including the network accuracy which is based upon its assigned Landonline order - refer LINZS25006 (www.linz.govt.nz/about-linz/news-publications-and-... ).

The accuracy provided relates to the accuracy of coordinates of the mark and has little relevance to the accuracy of the boundary in relation to other boundaries. For example, if the coordinates of the mark were used to locate it, a user would expect to find the existing mark within the nominal accuracy (distance) stated.

Layer ID 50774
Data type Vector point
Feature count 12498043
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Plans

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

25104
3021
Updated
16 Jun 2019

This dataset was last updated on LINZ Data Service on 16 Jun 2019.

This layer provides metadata about cadastral surveys along with reference points indicating the location of the survey.

A cadastral survey determines and describes the spatial extent (including boundaries) of interest of land within New Zealand. Each survey is allocated a unique reference number (that prior to Landonline included reference to the land district.

This data provides details that identify the type of survey, the purpose, description and key dates relating to the survey.

Layer ID 50794
Data type Vector multipoint
Feature count 1112871
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Cadastral Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6180
198
Updated
16 Jun 2019

This dataset was last updated on LINZ Data Service on 16 Jun 2019.

This layer provides the extents of influence that the work to integrate survey information has on the surrounding Cadastre.

All cadastral surveys must be integrated into the Cadastre. As part of this process the new information 'upgrades' the existing information. This is controlled by a mathematical adjustment process using a Least Squares methodology.

The adjustment/Integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extend of the change largely depends upon the size of the new survey, the difference in accuracy between new and old data and the number of linkages to other Surveys.

In general, where the underlying surveys are older or in a rural location the greater the extent of the adjustment.

Layer ID 50790
Data type Vector polygon
Feature count 242336
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Non-Boundary Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8546
1389
Updated
16 Jun 2019

This dataset was last updated on LINZ Data Service on 16 Jun 2019.

This layer provides survey mark information for marks that are not part of a parcel

A non-boundary mark is any survey mark that is not on a boundary point. The points in this dataset represent physical survey monuments usually placed for cadastral requirements. The data set also includes geodetic marks. Non-boundary marks now enter the Landonline system predominately as part of a cadastral survey dataset (plan) and occasionally via the geodetic processes. For Cadastral marks (i.e.the majority) its name consists of a mark type and number (and is unique to that survey), followed by the ‘plan’ number e.g. IS I DP 3456; IS II DP3456.

Note:
Non-boundary marks used to connect cadastral surveys to the geodetic network are those of 6th order (or better) and this subset is available as the NZ Cadastral Survey Network Marks layer.

This dataset extends the Landonline stored data by including the network accuracy which is based upon its assigned Landonline order - refer LINZS25006 (www.linz.govt.nz/about-linz/news-publications-and-...).

The accuracy provided relates to the accuracy of coordinates of the mark and has little relevance to the accuracy of the boundary in relation to other boundaries. For example, if the coordinates of the mark were used to locate it, a user would expect to find the existing mark within the accuracy (distance) stated.

Layer ID 50776
Data type Vector point
Feature count 2499548 (incl. 34 with empty or null geometries)
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 12