NZ Aerial Photo Footprints, Mainland NZ, (1936-2005) polygons

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3101
348
Added
18 Oct 2011

This layer has been provided to enable potential users to identify the coverage of photography for Mainland NZ flown on behalf of the Crown between 1936 and 2005. Areas flown outside of Mainland NZ will be added later.

The layer shows the extent of each photograph taken. The 'NZ Aerial Survey Footprints 1936-2005 poly' layer shows the extent of each survey undertaken.

The Collection exists as photographic negatives (most are not in digital form) so the images are not downloadable from the LDS.

The Crown Aerial Film Negative Collection is managed for LINZ by NZ Aerial Mapping Limited.

You can are order images from the Collection from NZ Aerial Mapping Limited. in a number of formats, including:
• contact prints
• enlargements
• digital files
• precision scans for photogrammetric production
• orthophotos

You will need to tell NZ Aerial Mapping the survey, run and photo number (values in the ‘SURVEY’ 'RUN_NO' and 'PHOTO_NO' attributes) covering your area of interest.

NZ Aerial Mapping will be able to provide information about the cost of providing images in the various formats. NZ Aerial Mapping Limited contact details can be found at nzam.com/contact/

There are a small number of images held in the Collection that have not been referenced in the LDS layers due to incomplete metadata. LINZ is currently investigating ways this can be remedied. NZ Aerial Mapping will be able to let you know if additional photographs are available in your area of interest.

NZ Aerial Mapping also have large number of NZAM-copyright images that are available for public use. The extents of these may be added to the LDS in future. You can order images from NZAM’s collection by contacting them.

Layer ID 1002
Data type Vector polygon
Feature count 428331

NZ Mainland Contours (Topo, 1:250k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2423
621
Updated
05 Oct 2012

An imaginary line that connects points of equal height value eg the elevation of the land surface above or below a vertical datum, in this case of LINZ topographic mapping, this is Mean Sea Level.

Data Dictionary for contour: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250

Layer ID 159
Data type Vector linestring
Feature count 74030
Elevation Z (elevation)

NZ Mainland Lake Polygons (Topo, 1:50k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1018
1261
Updated
13 Dec 2013

Any standing body of fresh inland water.

Data Dictionary for lake_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 293
Data type Vector polygon
Feature count 56276

NZ Mainland Track Centrelines (Topo, 1:50k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1265
971
Updated
13 Dec 2013

A deliberately formed route of a lesser quality than a road

Data Dictionary for track_cl: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 364
Data type Vector linestring
Feature count 79793

NZ Mainland Height Points (Topo, 1:50k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1568
839
Updated
13 Dec 2013

A height above a vertical datum, represented on a map by a dot locator with the elevation printed beside the dot. Unlike trigonometrical stations, spot heights are not identifiable on the ground

Data Dictionary for height_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 284
Data type Vector point
Feature count 85630

NZ Mainland Building Polygons (Topo, 1:50k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1277
797
Updated
13 Dec 2013

A relatively permanent walled and roofed construction.

Data Dictionary for building_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 246
Data type Vector polygon
Feature count 24693

NZ Coastlines and Islands Polygons (Topo 1:50k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1091
735
Updated
12 Dec 2013

This provides a polygon coastline and islands layer which is based on the Topo50 products. It is a combination of the following layers:

Islands from the NZ Island Polygons layer that lie within the NZ Coastline and Chatham Islands areas (i.e. islands in lakes, rivers and estuaries) have been removed.

The GIS workflow to create the layer is:

  1. NZ Coastlines were converted from a polyline to a polygon using a polyline to polygon tool.
  2. The resulting coastal polygon was then used as an input into an erase tool and run against the NZ Island Polygon layer to remove all islands lying within the NZ Mainland and Stewart Island.
  3. This was then merged with the NZ Chatham Is island polygons (Topo, 1:50k) that have had the islands within the main island polygon removed, NZ Auckland Is Island Polygons (Topo, 1:50k), NZ Campbell Is / Motu Ihupuku Island, NZ Antipodes Is Island Polygons (Topo, 1:25k), NZ Kermadec Is Island Polygons (Topo, 1:25k), NZ Bounty Is Island Polygons (Topo, 1:25k) and NZ Snares Is / Tini Heke Island Polygons (Topo, 1:25k) layers using a merge tool.
  4. Lake Onoke from the NZ Lake Polygons (Topo 1:50k) layer and Te Whanga Lagoon from the NZ Chatham Is lagoon polygons (Topo, 1:50k) layer were then erased from the resultant polygon layer to include these two water bodies in the coastline definition.

For more detailed description of each layer refer to the layer urls above.

Layer ID 1153
Data type Vector multipolygon
Feature count 9316

NZ Coastlines and Islands Polygons (Topo 1:50k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1091
735
Updated
12 Dec 2013

This provides a polygon coastline and islands layer which is based on the Topo50 products. It is a combination of the following layers:

Islands from the NZ Island Polygons layer that lie within the NZ Coastline and Chatham Islands areas (i.e. islands in lakes, rivers and estuaries) have been removed.

The GIS workflow to create the layer is:

  1. NZ Coastlines were converted from a polyline to a polygon using a polyline to polygon tool.
  2. The resulting coastal polygon was then used as an input into an erase tool and run against the NZ Island Polygon layer to remove all islands lying within the NZ Mainland and Stewart Island.
  3. This was then merged with the NZ Chatham Is island polygons (Topo, 1:50k) that have had the islands within the main island polygon removed, NZ Auckland Is Island Polygons (Topo, 1:50k), NZ Campbell Is / Motu Ihupuku Island, NZ Antipodes Is Island Polygons (Topo, 1:25k), NZ Kermadec Is Island Polygons (Topo, 1:25k), NZ Bounty Is Island Polygons (Topo, 1:25k) and NZ Snares Is / Tini Heke Island Polygons (Topo, 1:25k) layers using a merge tool.
  4. Lake Onoke from the NZ Lake Polygons (Topo 1:50k) layer and Te Whanga Lagoon from the NZ Chatham Is lagoon polygons (Topo, 1:50k) layer were then erased from the resultant polygon layer to include these two water bodies in the coastline definition.

For more detailed description of each layer refer to the layer urls above.

Layer ID 1153
Data type Vector multipolygon
Feature count 9325

NZ Mainland Native Polygons (Topo, 1:50k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

968
767
Updated
13 Dec 2013

A tract of land covered by trees native to New Zealand.

Data Dictionary for native_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 306
Data type Vector polygon
Feature count 102488

NZ Mainland Residential Area Polygons (Topo, 1:50k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

967
687
Updated
13 Dec 2013

The group of houses and their sections that together make up a residential area

Data Dictionary for residential_area_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 325
Data type Vector polygon
Feature count 2094
Results 11 to 20 of 492