Georeferenced Maps Layers

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

• Representation of a road or track does not necessarily indicate public right of access. For access rights, maps and other information, contact the New Zealand Walking Access Commission - www.walkingaccess.govt.nz

• The Department of Conservation and other agencies should be contacted for the latest information on tracks and back country huts. Closed tracks are defined as being no longer maintained or passable and should not be used.

• Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

• Contours and spot elevations in forest and snow areas may be less accurate.

• Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

• Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

The Topo250 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands at 1:250,000 scale.

Along with the paper-based Topo250 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo250/digi...

The Ant50 map series provides topographic mapping within the Ross Dependency, Antarctica

Digital images of the maps are also publicly available from www.linz.govt.nz/topography/topo-maps/antarctic-to...

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 (some of the islands at 1:25,000) scale.

The Bounty Island data and map, although captured and presented at 1:25,000 scale is, to all intents and purposes, part of the Topo50 series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

• The existence of a road or track does not necessarily indicate public right of access.

• Closed tracks are defined as being no longer maintained or passable and should not be used by recreationalists. The Department of Conservation or other authorities should be contacted for the latest information on tracks and huts.

• Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

• Contours and spot elevations in forest and snow areas may be less accurate.

• Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

• Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 (some of the islands at 1:25,000) scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

• The existence of a road or track does not necessarily indicate public right of access.

• Closed tracks are defined as being no longer maintained or passable and should not be used by recreationalists. The Department of Conservation or other authorities should be contacted for the latest information on tracks and huts.

• Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

• Contours and spot elevations in forest and snow areas may be less accurate.

• Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

• Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 (some of the islands at 1:25,000) scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

• The existence of a road or track does not necessarily indicate public right of access.

• Closed tracks are defined as being no longer maintained or passable and should not be used by recreationalists. The Department of Conservation or other authorities should be contacted for the latest information on tracks and huts.

• Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

• Contours and spot elevations in forest and snow areas may be less accurate.

• Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

• Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

• The existence of a road or track does not necessarily indicate public right of access.

• The Ministry of Infrastructure and Planning, Rarotonga, should be contacted for the latest information on tracks and huts.

• Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

• Contours and spot elevations in vegetation areas may be less accurate.

• Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

-Permits may be required to visit some sensitive and special areas. Contact the Ministry of Infrastructure and Planning, Rarotonga, to see if you need to apply for a permit.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 (some of the islands at 1:25,000) scale.

The Kermadec Islands data and maps, although captured and presented at 1:25,000 scale are, to all intents and purposes, part of the Topo50 series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

• The existence of a road or track does not necessarily indicate public right of access.

• Closed tracks are defined as being no longer maintained or passable and should not be used by recreationalists. The Department of Conservation or other authorities should be contacted for the latest information on tracks and huts.

• Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

• Contours and spot elevations in forest and snow areas may be less accurate.

• Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

• Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

• The existence of a road or track does not necessarily indicate public right of access.

-The Department of Lands & Survey, Niue, should be contacted for the latest information on tracks and huts. .

• Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

• Contours and spot elevations in vegetation areas may be less accurate.

• Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

• Permits may be required to visit some sensitive and special areas. Contact the Department of Environment, Niue, to see if you need to apply for a permit.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

• The existence of a road or track does not necessarily indicate public right of access.

• The Ministry of Infrastructure and Planning, Rarotonga, should be contacted for the latest information on tracks and huts.

• Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

• Contours and spot elevations in vegetation areas may be less accurate.

• Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

-Permits may be required to visit some sensitive and special areas. Contact the Ministry of Infrastructure and Planning, Rarotonga, to see if you need to apply for a permit..