NZ Topo50 Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

144905
30101
Updated
21 Oct 2019

This dataset was last updated on LINZ Data Service on 21 Oct 2019.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • Representation of a road or track does not necessarily indicate public right of access. For access rights, maps and other information, contact the New Zealand Walking Access Commission - www.walkingaccess.govt.nz

  • The Department of Conservation and other agencies should be contacted for the latest information on tracks and back country huts. Closed tracks are defined as being no longer maintained or passable and should not be used.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in forest and snow areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Layer ID 50767
Data type Image/Raster
Resolution 4.233m
Services Web Map Service (WMS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Chatham Is Topo50 Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4051
228
Updated
15 Apr 2019

This dataset was last updated on LINZ Data Service on 15 Apr 2019.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • Representation of a road or track does not necessarily indicate public right of access. For access rights, maps and other information, contact the New Zealand Walking Access Commission - www.walkingaccess.govt.nz

  • The Department of Conservation and other agencies should be contacted for the latest information on tracks and back country huts. Closed tracks are defined as being no longer maintained or passable and should not be used.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in forest and snow areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Layer ID 50815
Data type Image/Raster
Resolution 4.230m
Services Web Map Service (WMS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Topo250 Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

35711
5919
Updated
08 May 2018

This dataset was last updated on LINZ Data Service on 08 May 2018.

The Topo250 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands at 1:250,000 scale.

Along with the paper-based Topo250 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo250/digi...

Layer ID 50798
Data type Image/Raster
Resolution 21.200m
Services Web Map Service (WMS), Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Topo25 Zone4 Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

999
95
Added
02 Dec 2014

This dataset was first added to LINZ Data Service on 02 Dec 2014.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • The existence of a road or track does not necessarily indicate public right of access.

  • The Ministry of Infrastructure and Planning, Rarotonga, should be contacted for the latest information on tracks and huts.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in vegetation areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

-Permits may be required to visit some sensitive and special areas. Contact the Ministry of Infrastructure and Planning, Rarotonga, to see if you need to apply for a permit..

Layer ID 52315
Data type Image/Raster
Resolution 2.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Topo25 Zone3 Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1705
66
Added
02 Dec 2014

This dataset was first added to LINZ Data Service on 02 Dec 2014.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • The existence of a road or track does not necessarily indicate public right of access.

  • The Ministry of Infrastructure and Planning, Rarotonga, should be contacted for the latest information on tracks and huts.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in vegetation areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

-Permits may be required to visit some sensitive and special areas. Contact the Ministry of Infrastructure and Planning, Rarotonga, to see if you need to apply for a permit..

Layer ID 52314
Data type Image/Raster
Resolution 2.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Topo50 Zone3 Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3624
32
Added
02 Dec 2014

This dataset was first added to LINZ Data Service on 02 Dec 2014.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • The existence of a road or track does not necessarily indicate public right of access.

  • The Ministry of Infrastructure and Planning, Rarotonga, should be contacted for the latest information on tracks and huts.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in vegetation areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

-Permits may be required to visit some sensitive and special areas. Contact the Ministry of Infrastructure and Planning, Rarotonga, to see if you need to apply for a permit.

Layer ID 52313
Data type Image/Raster
Resolution 4.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Topo50 Zone4 Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

964
34
Added
02 Dec 2014

This dataset was first added to LINZ Data Service on 02 Dec 2014.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • The existence of a road or track does not necessarily indicate public right of access.

  • The Ministry of Infrastructure and Planning, Rarotonga, should be contacted for the latest information on tracks and huts.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in vegetation areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

-Permits may be required to visit some sensitive and special areas. Contact the Ministry of Infrastructure and Planning, Rarotonga, to see if you need to apply for a permit.

Layer ID 52312
Data type Image/Raster
Resolution 4.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Niue Topo50 Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1737
95
Added
02 Dec 2014

This dataset was first added to LINZ Data Service on 02 Dec 2014.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • The existence of a road or track does not necessarily indicate public right of access.

-The Department of Lands & Survey, Niue, should be contacted for the latest information on tracks and huts. .

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in vegetation areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special areas. Contact the Department of Environment, Niue, to see if you need to apply for a permit.

Layer ID 52311
Data type Image/Raster
Resolution 4.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Tokelau Topo25 Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3550
18
Added
04 Dec 2014

This dataset was first added to LINZ Data Service on 04 Dec 2014.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.

For Tokelau the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • The existence of a road or track does not necessarily indicate public right of access.

  • Contact local authorities for the latest information on tracks and huts.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in vegetation areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special areas.

Layer ID 52140
Data type Image/Raster
Resolution 2.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Antarctic Ant50k Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6390
316
Updated
08 Dec 2014

This dataset was last updated on LINZ Data Service on 08 Dec 2014.

The Ant50 map series provides topographic mapping within the Ross Dependency, Antarctica

Digital images of the maps are also publicly available from www.linz.govt.nz/topography/topo-maps/antarctic-to...

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Layer ID 51109
Data type Image/Raster
Resolution 4.233m
Services Web Map Service (WMS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 17