NZ Topo50 Gridless Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

14092
2545
Updated
29 Sep 2018

This dataset was last updated on LINZ Data Service on 29 Sep 2018.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • Representation of a road or track does not necessarily indicate public right of access. For access rights, maps and other information, contact the New Zealand Walking Access Commission - www.walkingaccess.govt.nz

  • The Department of Conservation and other agencies should be contacted for the latest information on tracks and back country huts. Closed tracks are defined as being no longer maintained or passable and should not be used.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in forest and snow areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Layer ID 52343
Data type Image/Raster
Resolution 4.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Topo250 Gridless Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4191
576
Updated
08 May 2018

This dataset was last updated on LINZ Data Service on 08 May 2018.

The Topo250 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands at 1:250,000 scale.

Along with the paper-based Topo250 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

This version is provided without a grid or graticule ticks.

To create this product the grid, graticule, grid text and graticule text representations were termporarily removed and the text-clashing routines rerun to reinstate features previously masked by the grid and graticule text. It is possible that some road, railway and track names will not match those on previously generatedTopo250 Geotiffs. The names willl not be wrong, but simply not been placed using the cartographic text-placement routines normally run prior to a formal data release.
Text on versions of the gridded and gridless products generated from Oct 2014 on will match.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Layer ID 52324
Data type Image/Raster
Resolution 21.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Antarctic Ant50k Gridless Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1358
36
Updated
02 Jul 2015

This dataset was last updated on LINZ Data Service on 02 Jul 2015.

The Ant50 map series provides topographic mapping within the Ross Dependency, Antarctica

Digital images of the maps are also publicly available from www.linz.govt.nz/topography/topo-maps/antarctic-to...

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Layer ID 52407
Data type Image/Raster
Resolution 4.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Chatham Islands Topo250 Gridless Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1311
29
Updated
02 Feb 2018

This dataset was last updated on LINZ Data Service on 02 Feb 2018.

The Topo250 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands at 1:250,000 scale.

Along with the paper-based Topo250 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

This version is provided without a grid or graticule ticks.

To create this product the grid, graticule, grid text and graticule text representations were temporarily removed and the text-clashing routines rerun to reinstate features previously masked by the grid and graticule text. It is possible that some road, railway and track names will not match those on previously generatedTopo250 Geotiffs. The names willl not be wrong, but simply not been placed using the cartographic text-placement routines normally run prior to a formal data release.
Text on versions of the gridded and gridless products generated from Oct 2014 on will match.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Layer ID 52328
Data type Image/Raster
Resolution 21.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Chatham Is Topo50 Gridless Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1287
32
Updated
08 May 2018

This dataset was last updated on LINZ Data Service on 08 May 2018.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • Representation of a road or track does not necessarily indicate public right of access. For access rights, maps and other information, contact the New Zealand Walking Access Commission - www.walkingaccess.govt.nz

  • The Department of Conservation and other agencies should be contacted for the latest information on tracks and back country huts. Closed tracks are defined as being no longer maintained or passable and should not be used.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in forest and snow areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Layer ID 52387
Data type Image/Raster
Resolution 4.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Topo25 Zone4 Gridless Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1219
18
Added
02 Dec 2014

This dataset was first added to LINZ Data Service on 02 Dec 2014.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

This version is provided without a grid or graticule ticks.

To create this product the grid, graticule, grid text and graticule text representations were termporarily removed and the text-clashing routines rerun to reinstate features previously masked by the grid and graticule text.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • The existence of a road or track does not necessarily indicate public right of access.

  • The Ministry of Infrastructure and Planning, Rarotonga, should be contacted for the latest information on tracks and huts.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in vegetation areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

-Permits may be required to visit some sensitive and special areas. Contact the Ministry of Infrastructure and Planning, Rarotonga, to see if you need to apply for a permit..

Layer ID 52316
Data type Image/Raster
Resolution 2.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Topo50 Zone4 Gridless Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1188
9
Added
03 Dec 2014

This dataset was first added to LINZ Data Service on 03 Dec 2014.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

This version is provided without a grid or graticule ticks.

To create this product the grid, graticule, grid text and graticule text representations were termporarily removed and the text-clashing routines rerun to reinstate features previously masked by the grid and graticule text.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • The existence of a road or track does not necessarily indicate public right of access.

  • The Ministry of Infrastructure and Planning, Rarotonga, should be contacted for the latest information on tracks and huts.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in vegetation areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

-Permits may be required to visit some sensitive and special areas. Contact the Ministry of Infrastructure and Planning, Rarotonga, to see if you need to apply for a permit.

Layer ID 52319
Data type Image/Raster
Resolution 4.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Bounty Is Topo25 Gridless Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1162
13
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 (some of the islands at 1:25,000) scale.

The Bounty Island data and map, although captured and presented at 1:25,000 scale is, to all intents and purposes, part of the Topo50 series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • The existence of a road or track does not necessarily indicate public right of access.

  • Closed tracks are defined as being no longer maintained or passable and should not be used by recreationalists. The Department of Conservation or other authorities should be contacted for the latest information on tracks and huts.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in forest and snow areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Layer ID 52393
Data type Image/Raster
Resolution 2.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Topo50 Zone3 Gridless Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1123
12
Added
03 Dec 2014

This dataset was first added to LINZ Data Service on 03 Dec 2014.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

This version is provided without a grid or graticule ticks.

To create this product the grid, graticule, grid text and graticule text representations were termporarily removed and the text-clashing routines rerun to reinstate features previously masked by the grid and graticule text.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • The existence of a road or track does not necessarily indicate public right of access.

  • The Ministry of Infrastructure and Planning, Rarotonga, should be contacted for the latest information on tracks and huts.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in vegetation areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

-Permits may be required to visit some sensitive and special areas. Contact the Ministry of Infrastructure and Planning, Rarotonga, to see if you need to apply for a permit.

Layer ID 52318
Data type Image/Raster
Resolution 4.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Tokelau Topo25 Gridless Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1096
14
Added
03 Dec 2014

This dataset was first added to LINZ Data Service on 03 Dec 2014.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.

For Tokelau the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

This version is provided without a grid or graticule ticks.

To create this product the grid, graticule, grid text and graticule text representations were termporarily removed and the text-clashing routines rerun to reinstate features previously masked by the grid and graticule text.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • The existence of a road or track does not necessarily indicate public right of access.

  • Contact local authorities for the latest information on tracks and huts.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in vegetation areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special areas.

Layer ID 52321
Data type Image/Raster
Resolution 2.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 17