Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 21 Jun 2021.
This dataset defines the Mean High Water coastline of New Zealand and offshore islands at a scale of 1:50,000, and describes the type of coast along the coastline, for example, steep coast, mangrove, or stony shore.
Purpose
The NZ Coastline – Mean High Water dataset is the first step towards improving the national coastline data for New Zealand. LINZ is currently working on a long-term project, “Coastal Mapping” to capture a range of national coastlines derived from LiDAR and bathymetry. This will enable us to generate coastlines, for example, for Mean High Water Springs, Chart Datum and Highest Astronomical Tide. The project is currently focused on capturing LiDAR and bathymetry data, and the timeframe for delivering the new coastlines will be established once the data capture has progressed.
Status
This dataset was created and is maintained from LINZ Hydrographic and Topographic sources. Originally created in August 2020, this dataset will be replaced by a more accurate dataset once data becomes available through the Coastal Mapping project.
Data sources and preparation
The spatial coastline data (1:50,000 scale) is sourced from the Topo50 series where it is described as a line forming the boundary between the land and sea, defined by mean high water. The source polygon data has been broken up into line segments to enable a coastal classification to be attributed to each segment of coast. Coastal classification data is based on official Electronic Navigational Charts published by the New Zealand Hydrographic Authority. Not all segments have been assigned a coastal category.
APIs and web services
This dataset is available via ArcGIS Online and ArcGIS REST services, as well as our standard APIs.
LDS APIs and OGC web services
ArcGIS Online map services
Layer ID | 105085 |
---|---|
Data type | Vector multilinestring | Feature count | 17840 |
Primary key | id |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 04 May 2022.
A structure on top of a hill, usually coloured black and white, used as a physical reference point by surveyors to determine location. The symbol shown on the map includes the elevation and trig identification code for beaconed trig stations.
These topographic trig points are derived from New Zealand geodetic marks data which can also be accessed through the LINZ Data Service: NZ Geodetic Marks and NZ Geodetic Vertical Marks.
Data Dictionary for trig_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...
This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.
Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50
Layer ID | 103476 |
---|---|
Data type | Vector point | Feature count | 5768 |
Primary key | t50_fid |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 18 Aug 2016.
Suitable for cartographic visualisation only. It was created by the interpolation of 20m contours with post-processing and filtering it is not suitable for terrain analysis.
This 8m Digital Elevation Model (DEM) was originally created by Geographx (geographx.co.nz) and was primarily derived from January 2012 LINZ Topo50 20m contours (data.linz.govt.nz/layer/768).
For a full description of the how the DEM was generated refer to this layer’s metadata.
Layer ID | 51768 |
---|---|
Data type | Grid |
Resolution | 8.000m |
Services | Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 04 May 2022.
This provides a polygon coastline and islands layer which is based on the Topo50 products. It is a combination of the following layers:
This topographic coastline is the line forming the boundary between the land and sea, defined by mean high water.
Islands from the NZ Island Polygons layer that lie within the NZ Coastline and Chatham Islands areas (i.e. islands in lakes, rivers and estuaries) have been removed.
The GIS workflow to create the layer is:
For more detailed description of each layer refer to the layer urls above.
APIs and web services
This dataset is available via ArcGIS Online and ArcGIS REST services, as well as our standard APIs.
LDS APIs and OGC web services
ArcGIS Online map services
ArcGIS REST API
Layer ID | 51153 |
---|---|
Data type | Vector multipolygon | Feature count | 9139 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 10 May 2013.
In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.
Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets.
The Topo50 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:50,000 scale.
Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50
Layer ID | 50765 |
---|---|
Data type | Image/Raster |
Resolution | 10.000m |
Services | Raster Tiles Query API, Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 04 May 2022.
A wrecked vessel, either submerged or visible which is attached to or foul of the bottom or cast up on the shore; or a greatly disabled or damaged vehicle
Data Dictionary for wreck_pnt: docs.topo.linz.govt.nz/data-dictionary/tdd-class-w...
This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.
Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50
Layer ID | 50379 |
---|---|
Data type | Vector point | Feature count | 51 |
Primary key | t50_fid |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 04 May 2022.
Apath that a ferry follows in passing to and fro
Data Dictionary for ferry_crossing_cl: docs.topo.linz.govt.nz/data-dictionary/tdd-class-f...
This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.
Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50
Layer ID | 50269 |
---|---|
Data type | Vector linestring | Feature count | 3 |
Primary key | t50_fid |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 04 May 2022.
A tract of land covered by trees not native to New Zealand
Data Dictionary for exotic_poly: docs.topo.linz.govt.nz/data-dictionary/tdd-class-e...
This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.
Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50
Layer ID | 50267 |
---|---|
Data type | Vector polygon | Feature count | 43938 |
Primary key | t50_fid |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 04 May 2022.
A relatively permanent walled and roofed construction.
Data Dictionary for building_pnt: docs.topo.linz.govt.nz/data-dictionary/tdd-class-b...
This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.
Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50
Layer ID | 50245 |
---|---|
Data type | Vector point | Feature count | 718699 |
Primary key | t50_fid |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 04 May 2022.
An artificial bank of earth and or stone built above the natural surface
Data Dictionary for embankment_cl: docs.topo.linz.govt.nz/data-dictionary/tdd-class-e...
This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.
Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50
Layer ID | 50266 |
---|---|
Data type | Vector linestring | Feature count | 2947 |
Primary key | t50_fid |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |