NZ Snares Island/Tini Heke Terrain Relief (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

36543
22
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale (some of the islands at 1:25,000).

Snares Islands / Tini Heke data and map, although captured and presented at 1:25,000 scale are, to all intents and purposes, part of the Topo50 series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52399
Data type Image/Raster
Resolution 5.000m
Services Raster Tiles Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Campbell Is/Motu Ihupuku Terrain Relief (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

35844
21
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale (some of the islands at 1:25,000).

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52397
Data type Image/Raster
Resolution 10.000m
Services Raster Tiles Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Snares Island/Tini Heke Cliff Edges (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

26805
51
Updated
21 May 2014

This dataset was last updated on LINZ Data Service on 21 May 2014.

A high, steep or overhanging face or rock. Can be rock.

Data Dictionary for cliff_edge: docs.topo.linz.govt.nz/data-dictionary/tdd-class-c...

Although captured and presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50889
Data type Vector linestring
Feature count 34
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Kermadec Is Terrain Relief (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

26794
19
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale (some of the islands at 1:25,000).

The Kermadec Island Group data and maps, although captured and presented at 1:25,000 scale are, to all intents and purposes, part of the Topo50 series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52398
Data type Image/Raster
Resolution 5.000m
Services Raster Tiles Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Snares Island/Tini Heke Height Points (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

26211
49
Updated
21 May 2014

This dataset was last updated on LINZ Data Service on 21 May 2014.

A height above a vertical datum, represented on a map by a dot locator with the elevation printed beside the dot. Unlike trigonometrical stations, spot heights are not identifiable on the ground

Data Dictionary for height_pnt: docs.topo.linz.govt.nz/data-dictionary/tdd-class-h...

Although captured and presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50892
Data type Vector point
Feature count 23
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Campbell Island/Motu Ihupuku Height Points (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

25918
67
Updated
10 Jun 2015

This dataset was last updated on LINZ Data Service on 10 Jun 2015.

A height above a vertical datum, represented on a map by a dot locator with the elevation printed beside the dot. Unlike trigonometrical stations, spot heights are not identifiable on the ground

Data Dictionary for height_pnt: docs.topo.linz.govt.nz/data-dictionary/tdd-class-h...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore Islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50930
Data type Vector point
Feature count 64
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Antipodes Island Cliff Edges (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

24369
60
Updated
04 Oct 2012

This dataset was last updated on LINZ Data Service on 04 Oct 2012.

A high, steep or overhanging face or rock. Can be rock.

Data Dictionary for cliff_edge: docs.topo.linz.govt.nz/data-dictionary/tdd-class-c...

Although captured and presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50973
Data type Vector linestring
Feature count 91
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Auckland Island Cliff Edges (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

24149
88
Updated
21 May 2014

This dataset was last updated on LINZ Data Service on 21 May 2014.

A high, steep or overhanging face or rock. Can be rock.

Data Dictionary for cliff_edge: docs.topo.linz.govt.nz/data-dictionary/tdd-class-c...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore Islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50953
Data type Vector linestring
Feature count 1100
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Bounty Islands Cliff Edges (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

23998
51
Updated
04 Oct 2012

This dataset was last updated on LINZ Data Service on 04 Oct 2012.

A high, steep or overhanging face or rock. Can be rock.

Data Dictionary for cliff_edge: docs.topo.linz.govt.nz/data-dictionary/tdd-class-c...

Although captured and presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50988
Data type Vector linestring
Feature count 2
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Campbell Island/Motu Ihupuku Contours (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

23349
157
Updated
10 Jun 2015

This dataset was last updated on LINZ Data Service on 10 Jun 2015.

An imaginary line that connects points of equal height value eg the elevation of the land surface above or below a vertical datum, in this case of LINZ topographic mapping, this is Mean Sea Level.

Data Dictionary for contour: docs.topo.linz.govt.nz/data-dictionary/tdd-class-c...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore Islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50927
Data type Vector linestring
Feature count 359
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 25