Niue Contours (Topo, 1:50k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

851
45
Added
01 Dec 2014

This dataset was first added to LINZ Data Service on 01 Dec 2014.

An imaginary line that connects points of equal height value eg the elevation of the land surface above or below a vertical datum, in this case of LINZ topographic mapping, this is Mean Sea Level.

Data Dictionary for contour: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52173
Data type Vector linestring
Feature count 13
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Terrain Relief (Topo, 1:50k, Zone3)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

859
15
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52404
Data type Image/Raster
Resolution 10.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Tokelau Well Points (Topo, 1:25k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

664
7
Added
01 Dec 2014

This dataset was first added to LINZ Data Service on 01 Dec 2014.

A pit or hole dug or bored into the earth

Data Dictionary for well_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52164
Data type Vector point
Feature count 1
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Building Points (Topo, 1:25k, Zone4)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

598
39
Added
02 Dec 2014

This dataset was first added to LINZ Data Service on 02 Dec 2014.

A relatively permanent walled and roofed construction.

Data Dictionary for building_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52236
Data type Vector point
Feature count 6934
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Monument Points (Topo, 1:25k, Zone4)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

630
4
Added
02 Dec 2014

This dataset was first added to LINZ Data Service on 02 Dec 2014.

A structure erected as a memorial.

Data Dictionary for monument_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52256
Data type Vector point
Feature count 1
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Airport Polygons (Topo, 1:25k, Zone4)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

599
26
Added
02 Dec 2014

This dataset was first added to LINZ Data Service on 02 Dec 2014.

A facility where aircraft can take off and land; usually consists of hard-surfaced landing strips, a control tower, hangars and accommodation for passengers and cargo

Data Dictionary for airport_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52231
Data type Vector polygon
Feature count 2
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Beacon Points (Topo, 1:25k, Zone4)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

621
4
Added
02 Dec 2014

This dataset was first added to LINZ Data Service on 02 Dec 2014.

A fixed signal, mark or light erected for the guidance of mariners or aeroplane pilots.

Data Dictionary for beacon_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52232
Data type Vector point
Feature count 2
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Bridge Centrelines (Topo, 1:25k, Zone4)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

579
21
Added
02 Dec 2014

This dataset was first added to LINZ Data Service on 02 Dec 2014.

A structure erected over a depression or obstacle to carry traffic or some facility such as a pipeline.

Data Dictionary for bridge_cl: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52235
Data type Vector linestring
Feature count 13
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Niue Terrain Relief (Topo, 1:50k)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

586
12
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52403
Data type Image/Raster
Resolution 10.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Beacon Points (Topo, 1:50k, Zone3)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

591
4
Added
02 Dec 2014

This dataset was first added to LINZ Data Service on 02 Dec 2014.

A fixed signal, mark or light erected for the guidance of mariners or aeroplane pilots.

Data Dictionary for beacon_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52218
Data type Vector point
Feature count 1
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 173