NZ Land Districts

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

42359
2472
Updated
14 Sep 2019

This dataset was last updated on LINZ Data Service on 14 Sep 2019.

This layer provides Land District shapes and their name.

A Land District is an administrative area that all titles and surveys were registered against prior to Landonline. It is required to uniquely identify survey and title records created prior to Landonline.

Layer ID 50785
Data type Vector multipolygon
Feature count 12
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Geodetic Vertical Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8977
1680
Updated
14 Sep 2019

This dataset was last updated on LINZ Data Service on 14 Sep 2019.

This dataset provides information about the position, height, height datum, height accuracy, mark name, mark type, condition and unique four letter identifier for geodetic marks that have an authoritative height in terms of a vertical datum. Heights are in datums defined at www.linz.govt.nz/geodetic/datums-projections-heigh....

All marks will have positions in terms a 3D New Zealand official geodetic datum. The horizontal positions of marks are provided for approximate location purposes only .

This dataset only contains marks that are within the New Zealand mainland and offshore islands. The height data for these marks have been generated using precise levelling from datum tide gauges, or has been acquired by 3rd party sources either as levelling observations or direct heights.

The source data is from Land Information New Zealand's (LINZ) Landonline system where it is used by Land Surveyors. This dataset is updated daily to reflect changes made in the Landonline.

Accuracy

The accuracy of normal-orthometric heights are described by height orders.

For more information see www.linz.govt.nz/geodetic/datums-projections-heigh....

Note the accuracy applies at the time the mark was last surveyed - see the geodetic database for historical information about height coordinates.

Layer ID 50784
Data type Vector point
Feature count 102437
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Control Networks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8746
1084
Updated
14 Sep 2019

This dataset was last updated on LINZ Data Service on 14 Sep 2019.

This dataset provides information about the survey control network, position, position accuracy, mark name, mark type, condition and unique four letter code for geodetic marks in terms of New Zealand's official geodetic datum, New Zealand Geodetic Datum 2000 (NZGD2000).

The dataset only contains marks that are within the New Zealand mainland and offshore islands. These positions have been generated using geodetic observations such as precise differential GPS or electronic distance and theodolite angle measurements. The positions are either 2D or 3D depending of the availability of this measurement data.

The source data is from Land Information New Zealand's (LINZ) Landonline system where it is used by Land Surveyors. This dataset is updated daily to reflect changes made in the Landonline.

The mark network is segmented into six control networks which provide control marks for specific purposes. The control_network field within this layer records this network with the 3 or 4 letter abbreviation code as follows:

NRF - National Reference Frame NDMN - National Deformation Monitoring Network RDMN - Regional Deformation Monitoring Network LDMN - Local Deformation Monitoring Network CHN - Cadastral Horizontal Control Network CVN - Cadastral Vertical Control Network BGN - Basic Geospatial Network NHN - National Height Network

Note a geodetic mark can be in more than network. Also not all geodetic marks are currently associated with a geodetic network. Those that are may be referred to as a control mark. For more information about the control networks refer to www.linz.govt.nz/geodetic/geodetic-programme/surve....

Accuracy

Geodetic marks with a coordinate order of 5 or less have been positioned in terms of NZGD2000. Lower order marks (order 6 and greater) are derived from cadastral surveys, lower accuracy measurement techniques or inaccurate historical datum transformations, and may be significantly less accurate.

The accuracy of NZGD2000 coordinates is described by a series of 'orders' classifications. Positions in terms of NZGD2000 are described by three-dimensional coordinates (latitude, longitude, ellipsoidal height). The accuracy of a survey mark is indicated by its order. Orders are classifications based on the quality of the coordinate in relation to the datum and in relation to other surrounding marks. For more information see www.linz.govt.nz/geodetic/datums-projections-heigh...

Note that the accuracy applies at the time the mark was last surveyed. Refer to the web geodetic database for historical information about mark coordinates.

Note also that the existence of a mark in this dataset does not imply that there is currently a physical mark in the ground - the dataset includes destroyed or lost historical marks. The geodetic database provides more information on the mark status, valid at last time it was visited by LINZ or a maintenance contractor.

Layer ID 50786
Data type Vector point
Feature count 115589
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Geodetic Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

15336
3444
Updated
14 Sep 2019

This dataset was last updated on LINZ Data Service on 14 Sep 2019.

This dataset provides information about the position, position accuracy, mark name, mark type, condition and unique four letter code for geodetic marks in terms of a New Zealand's official geodetic datum.

The dataset only contains marks that are within the New Zealand mainland and offshore islands. These positions have been generated using geodetic observations such as precise differential GPS or electronic distance and theodolite angles measurements. The positions are either 2D or 3D depending of the availability of this measurement data.

The source data is from Land Information New Zealand's (LINZ) Landonline system where it is used by Land Surveyors. This dataset is updated daily to reflect changes made in the Landonline.

Accuracy

Geodetic marks with a coordinate order of 5 or less have been positioned in terms of NZGD2000. Lower order marks (order 6 and greater) are derived from cadastral surveys, lower accuracy measurement techniques or inaccurate historical datum transformations, and may be significantly less accurate.

The accuracy of NZGD2000 coordinates is described by a series of 'orders' classifications. Positions in terms of NZGD2000 are described by three-dimensional coordinates (latitude, longitude, ellipsoidal height). The accuracy of a survey mark is indicated by its Order. Orders are classifications based on the quality of the coordinate in relation to the datum and in relation to other surrounding marks. For more information see www.linz.govt.nz/geodetic/datums-projections-heigh...

Note that the accuracy applies at the time the mark was last surveyed. Refer to the web geodetic database for historical information about mark coordinates.

Note also that the existence of a mark in this dataset does not imply that there is currently a physical mark in the ground - the dataset includes destroyed or lost historical marks. The geodetic database provides more information on the mark status, valid at last time it was visited by LINZ or a maintenance contractor.

Layer ID 50787
Data type Vector point
Feature count 128923
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Antarctic Geodetic Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2942
69
Updated
14 Sep 2019

This dataset was last updated on LINZ Data Service on 14 Sep 2019.

This dataset provides information about the position, position accuracy, mark name, mark type, condition and unique four letter code for geodetic marks in terms of New Zealand's official geodetic datum for the Ross Dependency.

This dataset only includes marks that are within Antarctica. These positions have been generated using geodetic observations such as precise differential GPS or electronic distance and theodolite angles measurements. The positions are either 2D or 3D depending of the availability of this measurement data.

The source data is from Land Information New Zealand's (LINZ) Landonline system where it is used by Land Surveyors. This dataset is updated daily to reflect changes made in the Landonline.

Accuracy

Geodetic marks with a coordinate order of 5 or less have been positioned in terms of Ross Sea Region Geodetic Datum 2000 (RSRGD2000) using precise differential GPS techniques. Marks with order 6 have been positioned in terms of RSRGD2000 using precise horizontal angles and distance measurements. Lower order marks (order 7 and greater) are derived from lower accuracy measurement techniques or historical datum transformations, and may be significantly less accurate.

The accuracy of RSRGD2000 coordinates is described by a series of 'orders' classifications. Positions in terms of RSRGD2000 are described by three-dimensional coordinates (latitude, longitude, ellipsoidal height). The accuracy of a survey mark is indicated by its order. Orders are classifications based on the quality of the coordinate in relation to the datum and in relation to other surrounding marks. For more information see www.linz.govt.nz/geodetic/datums-projections-heigh...

Note that the accuracy applies at the time the mark was last surveyed. Refer to the web geodetic database for historical information about mark coordinates.

Note also that the existence of a mark in this dataset does not imply that there is currently a physical mark in the ground - the dataset includes destroyed or lost historical marks. The geodetic database provides more information on the mark status, valid at last time it was visited by LINZ.

Layer ID 50789
Data type Vector point
Feature count 468
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Antarctic Geodetic Vertical Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2607
46
Updated
14 Sep 2019

This dataset was last updated on LINZ Data Service on 14 Sep 2019.

This dataset provides information about the position, height, height datum, height accuracy, mark name, mark type, condition and unique four letter identifier for geodetic marks that have an authoritative height in terms of a vertical datum.
Heights are in datums defined at www.linz.govt.nz/geodetic/datums-projections-heigh....

All marks will have positions in terms of New Zealand’s official geodetic datum for Antarctica, Ross Sea Region Geodetic Datum 2000 (RSRGD2000). The horizontal positions of marks are provided for approximate location purposes only.

This dataset only includes marks that are within the Antarctic region. The height data for these marks have been generated primarily using precise vertical angle and slope distance measurements from datum tide gauges. Some have been generated from levelling data.

The source data is from Land Information New Zealand's (LINZ) Landonline system where it is used by Land Surveyors. This dataset is updated daily to reflect changes made in the Landonline.

Accuracy

The accuracy of normal-orthometric heights are described by height orders.

For more information see www.linz.govt.nz/geodetic/datums-projections-heigh....

Note the accuracy applies at the time the mark was last surveyed - see the geodetic database for historical information about height coordinates.

Layer ID 50788
Data type Vector point
Feature count 279
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Protected Survey Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12949
1271
Updated
14 Sep 2019

This dataset was last updated on LINZ Data Service on 14 Sep 2019.

This layer identifies critical survey marks which LINZ requires to be physically protected.

Thousands of vital survey marks exist in New Zealand. Many of them are below or at ground level and not noticed by most of us.

People involved in construction work are responsible for making sure survey marks are not damaged. When building works have the potential to destroy existing cadastral and geodetic marks, LINZ needs to be notified so that it can assess whether the marks should be reinstated or replaced. Find out more about looking after the national survey network

Please note there may be other important survey marks not identified on this layer, and that LINZ recommends consultation with a Licensed Cadastral surveyor before any construction or earthworks begin.

If you notice a damaged survey mark, you can report it to LINZ by filling out a form on this website

Layer ID 50839
Data type Vector point
Feature count 197011
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Property Titles

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

420970
53842
Updated
14 Sep 2019

This dataset was last updated on LINZ Data Service on 14 Sep 2019.

This dataset provides title information (excluding ownership) where there is a relationship to one or more primary parcels.

A Record of Title is a record of a property's owners, legal description and the rights and responsibilities registered against the title.

This dataset does not contain any ownership information so that it can be freely distributed. If ownership information is required, see the NZ Property Title Including Owners and NZ Property Title Owners datasets. Note: these are restricted access datasets and require you to agree to the LINZ Licence for Personal Data.

There can be multiple parcels associated with a title, and a title may only have a part share in a parcel. This means the shape representing the title will be an aggregation of all parcels that the title is associated with. The ‘spatial extents shared’ attribute when equal to ‘false’ will indicate that title has exclusive interest over all of the shape (this will be case for the vast majority).

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see the LINZ website

Layer ID 50804
Data type Vector multipolygon
Feature count 2253541 (incl. 452 with empty or null geometries)
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Primary Parcels

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1
198029
64269
Updated
14 Sep 2019

This dataset was last updated on LINZ Data Service on 14 Sep 2019.

This layer provides the current primary parcel polygons and some associated descriptive data that details the appellation (legal description), purpose, size and a list of titles that have an interest in the parcel.

A primary parcel is a portion of land that is intended to be :
• owned by the Crown, except moveable marginal strips
• Held in fee simple ((predominately private ownership)
• Maori freehold land or Maori customary land
• Public foreshore and seabed
• The bed of a lake or river
• Road or Railway
• Vested in a local authority

Primary parcels can be thought of as the 'base level' of the 'jigsaw puzzle' of all land making up New Zealand. Other 'levels' are NZ Non-primary parcels that essentially limit the full rights that would normally be associated with a primary parcel for example easements, covenants, leases and moveable marginal strips etc.

If you require approved or historic parcels see the All Parcels Layer

This layer has a nominal accuracy of 0.1-1m in urban areas and 1-100m in rural areas. For more detailed information about parcel accuracies please refer to the Survey Boundary Marks layer which contains accuracies for each parcel node.

The combination of this layer with the non-primary parcels layer provides all current parcels for New Zealand (i.e. excludes Historic and Pending parcels)

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see

Layer ID 50772
Data type Vector multipolygon
Feature count 2588428
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Primary Land Parcels

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

44319
16218
Updated
14 Sep 2019

This dataset was last updated on LINZ Data Service on 14 Sep 2019.

This layer provides the current land parcel polygons with associated descriptive data and is provided for users that require a separation of road parcels and hydro parcels and thereby require the balance layer (i.e. the remaining primary parcels).

The combination of this layer with the road parcels and hydro parcels equates to the primary parcels layer which provides all current parcels for New Zealand (i.e. excludes historic and pending parcels).

This layer has a nominal accuracy of 0.1-1m in urban areas and 1-100m in rural areas. For more detailed information about parcel accuracies please refer to the Survey Boundary Marks layer which contains accuracies for each parcel node.

This set of three parcel layers ('road', 'hydro' and 'land') tables easy access to the most common groupings of parcel intents.

If you require approved or historic parcels see the All Parcels Layer

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see

Layer ID 50823
Data type Vector multipolygon
Feature count 2265777
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 21 to 30 of 1951