Antarctic Geodetic Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11327
78
Updated
24 Jul 2021

This dataset was last updated on LINZ Data Service on 24 Jul 2021.

This dataset provides information about the position, position accuracy, mark name, mark type, condition and unique four letter code for geodetic marks in terms of New Zealand's official geodetic datum for the Ross Dependency.

This dataset only includes marks that are within Antarctica. These positions have been generated using geodetic observations such as precise differential GPS or electronic distance and theodolite angles measurements. The positions are either 2D or 3D depending of the availability of this measurement data.

The source data is from Land Information New Zealand's (LINZ) Landonline system where it is used by Land Surveyors. This dataset is updated daily to reflect changes made in the Landonline.

Accuracy

Geodetic marks with a coordinate order of 5 or less have been positioned in terms of Ross Sea Region Geodetic Datum 2000 (RSRGD2000) using precise differential GPS techniques. Marks with order 6 have been positioned in terms of RSRGD2000 using precise horizontal angles and distance measurements. Lower order marks (order 7 and greater) are derived from lower accuracy measurement techniques or historical datum transformations, and may be significantly less accurate.

The accuracy of RSRGD2000 coordinates is described by a series of 'orders' classifications. Positions in terms of RSRGD2000 are described by three-dimensional coordinates (latitude, longitude, ellipsoidal height). The accuracy of a survey mark is indicated by its order. Orders are classifications based on the quality of the coordinate in relation to the datum and in relation to other surrounding marks. For more information see www.linz.govt.nz/geodetic/datums-projections-heigh...

Note that the accuracy applies at the time the mark was last surveyed. Refer to the web geodetic database for historical information about mark coordinates.

Note also that the existence of a mark in this dataset does not imply that there is currently a physical mark in the ground - the dataset includes destroyed or lost historical marks. The geodetic database provides more information on the mark status, valid at last time it was visited by LINZ.

Layer ID 50789
Data type Vector point
Feature count 472
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Antarctic Geodetic Vertical Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12438
51
Updated
24 Jul 2021

This dataset was last updated on LINZ Data Service on 24 Jul 2021.

This dataset provides information about the position, height, height datum, height accuracy, mark name, mark type, condition and unique four letter identifier for geodetic marks that have an authoritative height in terms of a vertical datum.
Heights are in datums defined at www.linz.govt.nz/geodetic/datums-projections-heigh....

All marks will have positions in terms of New Zealand’s official geodetic datum for Antarctica, Ross Sea Region Geodetic Datum 2000 (RSRGD2000). The horizontal positions of marks are provided for approximate location purposes only.

This dataset only includes marks that are within the Antarctic region. The height data for these marks have been generated primarily using precise vertical angle and slope distance measurements from datum tide gauges. Some have been generated from levelling data.

The source data is from Land Information New Zealand's (LINZ) Landonline system where it is used by Land Surveyors. This dataset is updated daily to reflect changes made in the Landonline.

Accuracy

The accuracy of normal-orthometric heights are described by height orders.

For more information see www.linz.govt.nz/geodetic/datums-projections-heigh....

Note the accuracy applies at the time the mark was last surveyed - see the geodetic database for historical information about height coordinates.

Layer ID 50788
Data type Vector point
Feature count 279
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ice area polygons (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7661
62
Updated
15 Jul 2021

This dataset was last updated on LINZ Data Service on 15 Jul 2021.

An area of ice over land or water.

S-57 Object Class: Ice area

S-57 Acronym: ICEARE

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 52058
Data type Vector polygon
Feature count 7
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Unsurveyed area polygons (Hydro, 1:350k - 1:1,500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

13786
68
Updated
12 Jul 2021

This dataset was last updated on LINZ Data Service on 12 Jul 2021.

An area for which no bathymetric survey information is available.

S-57 Object Class: Unsurveyed area

S-57 Acronym: UNSARE

This data was compiled for the use in the scale range 1:350,000 to 1:1,500,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 51602
Data type Vector polygon
Feature count 2
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ice area polygons (Hydro, 1:350k - 1:1,500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6341
68
Updated
12 Jul 2021

This dataset was last updated on LINZ Data Service on 12 Jul 2021.

An area of ice over land or water.

S-57 Object Class: Ice area

S-57 Acronym: ICEARE

This data was compiled for the use in the scale range 1:350,000 to 1:1,500,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 51598
Data type Vector polygon
Feature count 68
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ice area polygons (Hydro, 1:1.5mil and smaller)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7795
50
Updated
12 Jul 2021

This dataset was last updated on LINZ Data Service on 12 Jul 2021.

An area of ice over land or water.

S-57 Object Class: Ice area

S-57 Acronym: ICEARE

This data was compiled for the use in the scale range 1:1,500,000 and smaller.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 51635
Data type Vector polygon
Feature count 111
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Building, single points (Hydro, 1:1.5mil and smaller)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12753
35
Updated
12 Jul 2021

This dataset was last updated on LINZ Data Service on 12 Jul 2021.

A relatively permanent structure, roofed and usually walled. It is designed for some particular use which it may be important to indicate.

S-57 Object Class: Building, single

S-57 Acronym: BUISGL

This data was compiled for the use in the scale range 1:1,500,000 and smaller.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 92243
Data type Vector point
Feature count 20
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Antarctic Bathymetric Surface Model Index

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10462
11
Updated
26 Mar 2019

This dataset was last updated on LINZ Data Service on 26 Mar 2019.

This index enables you to identify freely available digital bathymetric surface models owned by LINZ. This data provides a 3-dimensional model of the surface of the seafloor.

These surface models have been created by LINZ from publically funded single- or multi-beam data collected in the Southern Ocean/Ross Sea since 2004. The polygons in the index show the extent of these gridded data models, and include descriptive information, such as the age and quality of the data.

The gridded surface models are not downloadable from the LINZ Data Service, but can be provided to you on request.

Please refer to the LINZ Bathymetric Index Data Dictionary for further information about the attributes of this dataset, and formats in which the data is available.

How to order the data:
Requests for the models should be sent to hydro@linz.govt.nz with “Hydro Bathy Data” in the subject line. Requests must, as a minimum, specify the id and surf_name of the models of interest and the data format (see the options in Section 1.4 of the Bathymetric Data Dictionary).

Layer ID 95588
Data type Vector multipolygon
Feature count 228
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Antarctic Bathymetric Data Index

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12481
20
Updated
21 Nov 2016

This dataset was last updated on LINZ Data Service on 21 Nov 2016.

This index enables you to identify the freely available bathymetric data held and used by LINZ on its Antarctic (Ross Dependency) coastal nautical charts. Some of our data holdings date back to the 1960s. The polygons comprising the index show the extent of the survey datasets. The attributes attached to each polygon will enable you to view, amongst other attributes, the age and quality of the bathymetric data.

Please refer to the LINZ Bathymetric Index Data Dictionary for further information about the attributes of this dataset.

The bathymetric data is not downloadable from the LINZ Data Service. Datasets prior to the year 2000 are predominantly available only as georeferenced TIFF images of the original hard copy sounding sheets. Data post-2000 is often available as both georeferenced TIFF images and as digital data files (vector data in plain text format).

Requests for the bathymetric data should be sent to hydro@linz.govt.nz with “Hydro Bathy Data” in the subject line. Requests must, as a minimum, specify the id, chart_no and serial_no as shown in the attributes attached to each polygon representing the datasets of interest.

Layer ID 53409
Data type Vector polygon
Feature count 49
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Ross Dependency Rock Points (ANT, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11651
57
Updated
04 Dec 2014

This dataset was last updated on LINZ Data Service on 04 Dec 2014.

An isolated rock or rock formation between high and low tides.

Data Dictionary for rock_pnt: docs.topo.linz.govt.nz/data-dictionary/tdd-class-r...

This layer is a component of the Ant50 map series. This is the topographic mapping carried out at 1:50,000 scale by LINZ within the Ross Dependency, Antarctica.

Layer ID 51171
Data type Vector point
Feature count 1
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 66