NZ Roads: Road Section Geometry

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

24163
4903
Updated
17 Jan 2020

This dataset was last updated on LINZ Data Service on 17 Jan 2020.

Please read: This is the table for Road Section Geometry, which is part of the set of NZ Roads tables. The Road Section Geometry table stores the linear geometry for the associated road section, or part of the associated road section.

The NZ Roads dataset includes eight data tables and eleven lookup tables. The dataset has been sourced from LINZ’s NZ Roads database, a database for the management of national roads, including those managed for addressing purposes. This set of normalised tables replaces the Landonline: Road Centre Line layer and the Landonline: Road Name and Landonline: Road Name Association tables currently published on LDS.

These centrelines are required to indicate the presence of an authoritative road name. Named centrelines are not intended to represent the exact location of a road formation. Named centrelines do not indicate the presence of legal access.

For a simplified version of the data contained within these tables see NZ Roads (Addressing), which aggregates geometries based on road name, and NZ Roads Subsections (Addressing), which holds the individual geometries.

Please refer to the NZ Roads Data Dictionary for detailed metadata and information about this layer.

Layer ID 53378
Data type Vector multilinestring
Feature count 336967
Primary key road_section_geometry_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Street Address

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

77199
12763
Updated
17 Jan 2020

This dataset was last updated on LINZ Data Service on 17 Jan 2020.

Please read:This layer provides all allocated addresses as advised to LINZ by Territorial Authorities (TAs). Under the Local Government Act 1974 (section 319) it is the responsibility of the TAs to advise LINZ (the Surveyor General) of all allocated addresses in their district.


Local Government Act 1974
319B Allocation of property numbers
(1) For electoral, postal, and other purposes the council may allocate a number to any area of land or building or part of a building within its district and may change the number allocated to any such area of land or building.
(2) The council shall comply with any request from a Chief Surveyor to allocate a number to or change the number of any area of land or building or part of a building in its district.
(3) The principal administrative officer shall advise the Chief Surveyor of the land district in which the land or building is situated of the numbers allocated under subsection (1) or subsection (2).


This dataset contains the core components of an address to support simple searching or use of this layer to provide context and is a replacement for the NZ Street Address (Electoral) dataset. This dataset has been sourced from LINZ’s Address Information Management System (AIMS), a centralised database for the management of national addresses, including for electoral purposes.

The existing address and road datasets will be available for 6 months after AIMS go-live to allow users further time to transition.This version will be replacing NZ Street Address (Electoral) dataset.

Please refer to the Street Address Data Dictionary for detailed metadata and information about this layer.

For a comprehensive group of address tables see AIMS: Street Address.

Layer ID 53353
Data type Vector point
Feature count 2067885
Primary key address_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Roads (Addressing)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1
19621
3572
Updated
17 Jan 2020

This dataset was last updated on LINZ Data Service on 17 Jan 2020.

Please read: This layer provides linear geometries against which official road names and street addresses can be recorded. Its purpose is also to enable automated meshblock address reports (for electoral and statistical purposes) so as to identify the presence of a road name in meshblocks where street addresses do not exist.

For this layer (as opposed to the NZ Roads Subsections (Addressing) layer, individual road section geometries have been aggregated to a single road centreline geometry where those subsections share the same name, and are generally contiguous. Because some roads have multiple names for part of their lengths, some road centreline geometries will duplicate parts of other roads even though there is in reality only one road formation. This layer has been simplified from LINZ’s NZ Roads dataset, a centralised database for the management of national road data. The comprehensive set of NZ Roads tables is also available.

These road centrelines do not represent actual road formation, nor do they represent legal access. They must not be considered as topographic, cadastral, or legal.

This layer contains the core attributes of a road to support simple searching or provide a road name context for cadastral data views. This dataset is a replacement for the NZ Road Centre Line (Electoral) dataset.

The Electoral road and address datasets will be available until May 2017 to allow users further time to transition.

Please refer to the NZ Roads Data Dictionary for detailed metadata and information about this layer.

Layer ID 53382
Data type Vector multilinestring
Feature count 77153
Primary key road_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Landonline: Electorate Place (Deprecated)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6806
618
Updated
17 Jan 2020

This dataset was last updated on LINZ Data Service on 17 Jan 2020.

From August 2016, this dataset will be removed from the Landonline database and will no longer be maintained.


Place names that may potentially be used by an elector to identify their correct electorate.

Please refer to the LDS Full Landonline Data Dictionary and Models for detailed metadata about this table.

Layer ID 51714
Data type Vector point
Feature count 6712
Primary key id
Services Vector Query API, Web Feature Service (WFS)

NZ Railway Centre Lines

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11847
2845
Updated
17 Jan 2020

This dataset was last updated on LINZ Data Service on 17 Jan 2020.

The source data exists in order to provide linear geometries against which official railway names can be recorded and to provide contextual data for Landonline users.

A railway centreline in this layer will typically consist of a centreline wholly contained with a parcel(s) with an intent of "railway"

The railway centrelines do not represent actual railway formation but the presence, and general location of a gazetted railway for contextual uses.

Layer ID 50781
Data type Vector multilinestring
Feature count 59
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Depth contour polyline (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11206
1539
Updated
16 Jan 2020

This dataset was last updated on LINZ Data Service on 16 Jan 2020.

A line connecting points of equal water depth which is sometimes significantly displaced outside of soundings, symbols and other chart detail for clarity as well as generalization. Depth contours, therefore, often represent an approximate location of the line of equal depth as related to the surveyed line delineated on the source. Also referred to as depth curve.

S-57 Object Class: Depth contour

S-57 Acronym: DEPCNT

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50448
Data type Vector multilinestring
Feature count 15540
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Depth contour polyline (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4059
603
Updated
16 Jan 2020

This dataset was last updated on LINZ Data Service on 16 Jan 2020.

A line connecting points of equal water depth which is sometimes significantly displaced outside of soundings, symbols and other chart detail for clarity as well as generalization. Depth contours, therefore, often represent an approximate location of the line of equal depth as related to the surveyed line delineated on the source. Also referred to as depth curve.

S-57 Object Class: Depth contour

S-57 Acronym: DEPCNT

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50672
Data type Vector multilinestring
Feature count 13472
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Depth contour polyline (Hydro, 1:350k - 1:1,500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6562
595
Updated
16 Jan 2020

This dataset was last updated on LINZ Data Service on 16 Jan 2020.

A line connecting points of equal water depth which is sometimes significantly displaced outside of soundings, symbols and other chart detail for clarity as well as generalization. Depth contours, therefore, often represent an approximate location of the line of equal depth as related to the surveyed line delineated on the source. Also referred to as depth curve.

S-57 Object Class: Depth contour

S-57 Acronym: DEPCNT

This data was compiled for the use in the scale range 1:350,000 to 1:1,500,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50849
Data type Vector multilinestring
Feature count 4066
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Depth contour polyline (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8688
1022
Updated
16 Jan 2020

This dataset was last updated on LINZ Data Service on 16 Jan 2020.

A line connecting points of equal water depth which is sometimes significantly displaced outside of soundings, symbols and other chart detail for clarity as well as generalization. Depth contours, therefore, often represent an approximate location of the line of equal depth as related to the surveyed line delineated on the source. Also referred to as depth curve.

S-57 Object Class: Depth contour

S-57 Acronym: DEPCNT

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50554
Data type Vector multilinestring
Feature count 24070
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Sounding points (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6962
632
Updated
15 Jan 2020

This dataset was last updated on LINZ Data Service on 15 Jan 2020.

A measured water depth or spot which has been reduced to a vertical datum (may be a drying height).

S-57 Object Class: Sounding

S-57 Acronym: SOUNDG

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50506
Data type Vector multipoint
Feature count 36908
ElevationZ coordinates
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 51 to 60 of 1794