NZ Sand Polygons (Topo, 1:500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4160
180
Added
22 May 2011

This dataset was first added to LINZ Data Service on 22 May 2011.

Sand: crushed rock, shells etc smaller than 2mm in size

Data Dictionary for sand_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo500 data. The Topo500 map series will, when it is created, provide updated topographic mapping for the New Zealand mainland at 1:500,000 scale.

Layer ID 50235
Data type Vector polygon
Feature count 363
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Saddle Points (Topo, 1:500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3791
104
Added
22 May 2011

This dataset was first added to LINZ Data Service on 22 May 2011.

Low point or opening between hills or mountains

Data Dictionary for saddle_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo500 data. The Topo500 map series will, when it is created, provide updated topographic mapping for the New Zealand mainland at 1:500,000 scale.

Layer ID 50236
Data type Vector point
Feature count 5
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Cattlestop Points (Topo, 1:50k) (DEPRECATED)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4240
142
Updated
11 Jun 2015

This dataset was last updated on LINZ Data Service on 11 Jun 2015.

From the May 2015 Topographic Data Release, cattle stops have been removed from the Topo50 schema and are no longer maintained. Cattle stops have been a legacy feature for some time.


A ditch covered by spaced bars to allow the passage of vehicles and pedestrians, but not cattle etc

Data Dictionary for cattlestop_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50252
Data type Vector point
Feature count 9
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Conveyor polyline (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4513
69
Updated
13 Jan 2016

This dataset was last updated on LINZ Data Service on 13 Jan 2016.

A mechanical apparatus for moving bulk material or people from place to place (as by a moving belt or chain of receptacles).

S-57 Object Class: Conveyor

S-57 Acronym: CONVYR

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50441
Data type Vector linestring
Feature count 1
ElevationZ coordinates
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Conveyor polygons (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4544
70
Updated
13 Sep 2016

This dataset was last updated on LINZ Data Service on 13 Sep 2016.

A mechanical apparatus for moving bulk material or people from place to place (as by a moving belt or chain of receptacles).

S-57 Object Class: Conveyor

S-57 Acronym: CONVYR

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50662
Data type Vector multipolygon
Feature count 1
ElevationZ coordinates
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Terrain Relief (Topo50)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

24507
3983
Updated
10 May 2013

This dataset was last updated on LINZ Data Service on 10 May 2013.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets.

The Topo50 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:50,000 scale.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50765
Data type Image/Raster
Resolution 10.000m
Services Web Map Service (WMS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Terrain Relief (Topo250)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9808
974
Updated
09 May 2013

This dataset was last updated on LINZ Data Service on 09 May 2013.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo250 map series. There may be subtle differences in the relief shading of adjacent map sheets.

The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250

Layer ID 50766
Data type Image/Raster
Resolution 50.000m
Services Web Map Service (WMS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Chatham Is Terrain Relief (Topo50)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4396
136
Added
20 May 2011

This dataset was first added to LINZ Data Service on 20 May 2011.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo250 map series. There may be subtle differences in the relief shading of adjacent map sheets.

The Topo50 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:50,000 scale.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50769
Data type Image/Raster
Resolution 10.000m
Services Web Map Service (WMS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Street Address (Electoral) (Deprecated)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1
79516
13354
Updated
01 Jul 2017

This dataset was last updated on LINZ Data Service on 01 Jul 2017.

As of June 2017, this dataset has been replaced by the NZ Street Address and will no longer be updated. See Street Address Data Dictionary for field mappings to the new dataset.


This layer provides all allocated addresses as advised to LINZ by Territorial Authorities (TAs). Under the Local Government Act 1974 (section 319) it is the responsibility of the TAs to advise LINZ (the Surveyor General) of all allocated addresses in their district.


Local Government Act 1974
319B Allocation of property numbers
(1) For electoral, postal, and other purposes the council may allocate a number to any area of land or building or part of a building within its district and may change the number allocated to any such area of land or building.
(2) The council shall comply with any request from a Chief Surveyor to allocate a number to or change the number of any area of land or building or part of a building in its district.
(3) The principal administrative officer shall advise the Chief Surveyor of the land district in which the land or building is situated of the numbers allocated under subsection (1) or subsection (2).


Generally allocated addresses will be represented by a single point. However there was an historical practice to represent only the principal address allocated by Territorial Authorities, and not include addresses assigned to individual flats. Similarly there was an historical practice to aggregate addresses into ranges, especially where there are many addresses for a single parcel. We are working (where possible) to resolve these historical anomalies and have each allocated address represented where possible. The datasets also includes addresses where the Surveyor General has requested (under the Local Government Act) that a TA allocated an address.

The road name and locality fields attributed to an address are taken from the associated road attributes. These roads are stored as centrelines (see NZ Road Centre Line (Electoral)) and reflect the road names as assigned by the TA responsible. The locality name ensures that if duplicate road names exist in TA that the number/road combination can still be unique by using the locality field.

Wherever address points have been provided in spatial data files by a TA, LINZ will import this data and use the exact location as defined by the TA. Where non spatial data is provided LINZ adds the location of an address point with the mandatory priority to locate that address point within the correct meshblock. The location of the front door of an elector's dwelling within the correct meshblock is a fundamental requirement of the electoral system (Section 72 Electoral Act 1993). Highly desirable priorities for the location of an address point are to have it in the same property and parcel as the dwelling and on the correct side of the physical and legal roads. It is also a desirable priority to have the address point in the same location as the dwelling and/or at the location of the property entrance.

Layer ID 50779
Data type Vector point
Feature count 1984527
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Chatham Islands Topo250 Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5467
137
Updated
02 Feb 2018

This dataset was last updated on LINZ Data Service on 02 Feb 2018.

The Topo250 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands at 1:250,000 scale.

Along with the paper-based Topo250 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo250/digi...

Layer ID 50791
Data type Image/Raster
Resolution 21.200m
Services Web Map Service (WMS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 61 to 70 of 1471