Airport/airfield points (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7211
110
Updated
29 Jul 2020

This dataset was last updated on LINZ Data Service on 29 Jul 2020.

An area containing at least one runway, used for landing, take-off, and movement of aircraft.

S-57 Object Class: Airport/airfield

S-57 Acronym: AIRARE

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50056
Data type Vector multipoint
Feature count 10
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Orthophotos 2002-2003

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6747
305
Added
22 Sep 2011

This dataset was first added to LINZ Data Service on 22 Sep 2011.

LINZ publishes 1:25,000 scale orthophotos of New Zealand from its archive. The New Zealand orthophotos shown are historical and no further orthophotos of New Zealand will be published.

Coverage of 1 pixel is 2.5m x 2.5m

Layer ID 51031
Data type Image/Raster
Resolution 2.500m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Dam Centrelines (Topo, 1:250k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6444
307
Updated
17 Feb 2020

This dataset was last updated on LINZ Data Service on 17 Feb 2020.

A barrier constructed across a watercourse to control the flow or raise the level of water

Data Dictionary for dam_cl: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250

Layer ID 50160
Data type Vector linestring
Feature count 56
Primary key t250_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Pipeline, submarine/on land polyline (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6693
152
Updated
31 Jul 2020

This dataset was last updated on LINZ Data Service on 31 Jul 2020.

A pipeline is a string of interconnected pipes used for the transport of matter, nowadays mainly oil or gas. A submarine or land pipeline is a pipeline lying on or buried under the seabed or the land.

S-57 Object Class: Pipeline, submarine/on land

S-57 Acronym: PIPSOL

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50591
Data type Vector multilinestring
Feature count 42
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Administration Area (Named) polygon (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6722
104
Updated
31 Jul 2020

This dataset was last updated on LINZ Data Service on 31 Jul 2020.

A defined (and possibly named) administrative area.

S-57 Object Class: Administration Area (Named)

S-57 Acronym: ADMARE

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50524
Data type Vector multipolygon
Feature count 35
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Auckland 1946 to NZGD2000 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6484
50
Updated
02 Aug 2016

This dataset was last updated on LINZ Data Service on 02 Aug 2016.

The AUK46-NZGD2000 grid enables the conversion of normal-orthometric heights from the Auckland 1946 local vertical datum directly to New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights.

AUK46-NZGD2000 is published on a one arc-minute grid (approximately 1.8 kilometres) extending over the benchmarks that nominally define the extent of the Auckland 1946 vertical datum (174.0° E to 176.2° E, 36.1° S to 38.0° S).

The conversion value is represented by the attribute “delta”, in metres.

This grid is a combination of New Zealand Quasigeoid 2016 NZGeoid2016 and the AUK46-NZVD2016 height conversion grid. Where NZGeoid2016 is the reference surface for the New Zealand Vertical Datum 2016 (NZVD2016), while the AUK46-NZVD2016 grid models the difference between the Auckland 1946 vertical datum and NZVD2016 using the LINZ GPS-levelling marks.

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53416
Data type Vector point
Feature count 15295
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Cable, overhead polyline (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6685
113
Updated
31 Jul 2020

This dataset was last updated on LINZ Data Service on 31 Jul 2020.

An overhead cable is an assembly of wires or fibres, or a wire rope or chain, which is supported by structures such as poles or pylons and passing over or nearby navigable waters.

S-57 Object Class: Cable, overhead

S-57 Acronym: CBLOHD

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50658
Data type Vector multilinestring
Feature count 48
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Bathymetric Surface Model Index – Third Party

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6604
47
Updated
28 Aug 2020

This dataset was last updated on LINZ Data Service on 28 Aug 2020.

This index enables you to identify digital bathymetric surface models created by LINZ using third party data. This data provides a 3-dimensional model of the surface of the seafloor.

These surface models have been created by LINZ from third party single- or multi-beam data collected in the New Zealand coastal area since 2009. The polygons in the index show the extent of these gridded data models, and include descriptive information, such as the age and quality of the data.

The gridded surface models are not downloadable from the LINZ Data Service, but can be requested.

Please refer to the LINZ Bathymetric Index Data Dictionary for further information about the attributes of this dataset, and formats in which the data is available.

How to order the data:
Requests for the models should be sent to customersupport@linz.govt.nz with “Hydro Bathy Data” in the subject line. Requests must, as a minimum, specify the id and surf_name of the models of interest and the data format (see the options in Section 1.4 of the Bathymetric Data Dictionary).

It may take a few days to get the surface models generated from third party funded bathymetric data to you, as we need to confirm with the data owner that they are happy for their data to be released. The owner may attach conditions to the release of their data.

LINZ also holds publically funded bathymetric data for the New Zealand coastal area, which can be readily released under a Creative Commons licence for reuse. View our "NZ Bathymetric Surface Model Index" dataset to request this data.

Layer ID 95575
Data type Vector multipolygon
Feature count 79
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Embankment Centrelines (Topo, 1:250k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6353
243
Updated
17 Feb 2020

This dataset was last updated on LINZ Data Service on 17 Feb 2020.

An artificial bank of earth and or stone built above the natural surface

Data Dictionary for embankment_cl: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250

Layer ID 50162
Data type Vector linestring
Feature count 88
Primary key t250_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Built-up area points (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6535
104
Updated
31 Jul 2020

This dataset was last updated on LINZ Data Service on 31 Jul 2020.

An area containing a concentration of buildings and the supporting road or rail infrastructure.

S-57 Object Class: Built-up area

S-57 Acronym: BUAARE

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50652
Data type Vector multipoint
Feature count 45
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 81 to 90 of 215