NZ Christchurch Post-EQ Survey-Accurate (SDC) Boundary Coordinates

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

19015
610
Added
22 Feb 2015

This dataset was first added to LINZ Data Service on 22 Feb 2015.

For further information about this dataset, see the Canterbury earthquake information.

Coordinates computed by adding the effects of deep-seated movement to survey points that had authoritative survey-accurate digital cadastre (SDC) coordinates immediately prior to 4 September 2010 (the first Canterbury earthquake). Marks that did not have SDC status at that time are not included in the dataset. Deep-seated movements were evaluated using the NZGD2000 deformation model.

  • The 'nod_id' column is the Landonline node id. This is the unique identifier for the mark.
  • The 'current_name' column is the Landonline mark name. Many boundary marks do not have a name recorded in this dataset, because this information has not been digitally captured.
  • The 'east_mtpleatm2000' and 'north_mtpleatm2000' columns are the east and north coordinates (metres) in terms of the Mt Pleasant 2000 transverse mercator projection. Rounded to the nearest centimetre.
  • The 'coord_order' column is the Landonline coordinate order immediately prior to 4 September 2010.

The estimated absolute uncertainty of these coordinates is 0.09m at the 95% confidence level.

These coordinates are intended for the use of Licensed Cadastral Surveyors when locating boundaries in Christchurch, in accordance with the Rules for Cadastral Survey 2010 and associated guidance, particularly guidance relating to the earthquakes.

Layer ID 52350
Data type Vector point
Feature count 415489
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Chart NZ 6321 Lyttelton Harbour / Whakaraupo: Port of Lyttelton

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

17676
422
Updated
14 Feb 2021

This dataset was last updated on LINZ Data Service on 14 Feb 2021.

Raster chart image of: NZ 6321 Lyttelton Harbour / Whakaraupo: Port of Lyttelton

This data was compiled for the use at the following scale: 7500

File reference: NZ632102.tif

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

Layer ID 51414
Data type Image/Raster
Resolution About 0.318m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Canterbury Earthquake Geodetic Marks (2010, 2011) - Simple

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

17900
114
Added
26 Apr 2013

This dataset was first added to LINZ Data Service on 26 Apr 2013.

The Canterbury region of New Zealand experienced a sequence of significant earthquakes during 2010 and 2011. These earthquakes occurred on 2010-09-04, 2011-02-22, 2011-06-13 and 2011-12-23. The coordinates in this layer account for all significant movements relating to these, so should be consistent with any observations made after the last earthquake to affect a given area (neglecting localised deformation such as that due to liquefaction).

Users may also be interested in the more comprehensive data in the companion layer Canterbury Earthquake Geodetic Marks (2010, 2011) - Comprehensive.

These coordinates are only provisional. Analysis is ongoing as further data is collected. Coordinates were calculated using SNAP v2.3.61. Stations were constrained using coordinates calculated by GNS Science. Some coordinates were calculated from data provided by Christchurch City Council. No precise levelling data has been used.

The estimated accuracy is 0.02m horizontally and 0.03m vertically.

The deformation model igns2011_working.grd calculated from a model (v4) provided by GNS Science on 28 April 2011 was used to remove secular deformation.

These coordinates are suitable for use in surveys and other geospatial activities in Canterbury and Christchurch.

For further information about this dataset, see the Canterbury earthquake information on the LINZ website.

Layer ID 51589
Data type Vector point
Feature count 719
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Selwyn 0.125m Urban Aerial Photos Index Tiles (2012-2013)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

17634
82
Added
14 Apr 2014

This dataset was first added to LINZ Data Service on 14 Apr 2014.

Index Tiles ONLY, for actual orthophotos see layer Selwyn 0.125m Urban Aerial Photos (2012-13)

Orthophotography for the Selwyn District Council taken during 2012. Coverage encompassed the urban areas within the Selwyn District Council area.

Imagery was captured for the ‘Selwyn District Counci’ by Aerial Surveys Ltd, Unit A1, 8 Saturn Place, Albany,0632, New Zealand.

Data comprises:
•1,970 x ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:1,000 tile layout
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. The products are tiled into NZTopo50 1:1,000 tiles. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.
Imagery supplied as 12.5cm pixel resolution (0.125m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is +/-0.2m.

Layer ID 51935
Data type Vector polygon
Feature count 1970
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Christchurch Post-EQ Survey-Accurate (SDC) Non-Boundary Coordinates

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

16989
663
Added
22 Feb 2015

This dataset was first added to LINZ Data Service on 22 Feb 2015.

For further information about this dataset, see the Canterbury earthquake information.

Coordinates computed by adding the effects of deep-seated movement to survey points that had authoritative survey-accurate digital cadastre (SDC) coordinates immediately prior to 4 September 2010 (the first Canterbury earthquake). Marks that did not have SDC status at that time are not included in the dataset. Deep-seated movements were evaluated using the NZGD2000 deformation model.

  • The 'nod_id' column is the Landonline node id. This is the unique identifier for the mark.
  • The 'current_name' column is the Landonline mark name.
  • The 'east_mtpleatm2000' and 'north_mtpleatm2000' columns are the east and north coordinates (metres) in terms of the Mt Pleasant 2000 transverse mercator projection. Rounded to the nearest centimetre.
  • The 'coord_order' column is the Landonline coordinate order immediately prior to 4 September 2010.

The estimated absolute uncertainty of these coordinates is 0.09m at the 95% confidence level.

These coordinates are intended for the use of Licensed Cadastral Surveyors when locating boundaries in Christchurch, in accordance with the Rules for Cadastral Survey 2010 and associated guidance, particularly guidance relating to the earthquakes.

Layer ID 52349
Data type Vector point
Feature count 50181
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Strata Parcels

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

16894
600
Updated
09 Apr 2021

This dataset was last updated on LINZ Data Service on 09 Apr 2021.

This layer provides the current strata parcel polygons and their associated descriptive data as a single layer to facilitate their use independently of other primary parcels or non primary parcels.

Strata parcels are portions of land where the vertical extent is limited.

The combination of this layer with the primary parcels layer provides all current parcels for New Zealand (i.e. excludes Historic and Pending parcels)

If you require approved or historic parcels see the All Parcels Layer

This layer has a nominal accuracy of 0.1-1m in urban areas and 1-100m in rural areas. For more detailed information about parcel accuracies please refer to the Survey Boundary Marks layer which contains accuracies for each parcel node.

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see

Layer ID 50780
Data type Vector multipolygon
Feature count 640
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Chart NZ 6324 Akaroa Harbour: French Bay

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

17182
272
Updated
06 Jul 2017

This dataset was last updated on LINZ Data Service on 06 Jul 2017.

Raster chart image of: NZ 6324 Akaroa Harbour: French Bay

This data was compiled for the use at the following scale: 1:15000

File reference: NZ632402.tif

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

Layer ID 51415
Data type Image/Raster
Resolution About 0.636m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Canterbury Earthquake Precise-Levelling Heights (2010, 2011)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

17273
117
Updated
04 Sep 2014

This dataset was last updated on LINZ Data Service on 04 Sep 2014.

The Canterbury region of New Zealand experienced a sequence of significant earthquakes during 2010 and 2011. These earthquakes occurred on 2010-09-04, 2011-02-22, 2011-06-13 and 2011-12-23. Precise-levelling surveys have been carried out throughout Canterbury and Christchurch to re-establish heights after these earthquakes.

Users may also be interested in the horizontal coordinates derived from GNSS data in the companion layers Canterbury Earthquake Geodetic Marks (2010, 2011) - Comprehensive and Canterbury Earthquake Geodetic Marks (2010, 2011) - Simple

Horizontal Accuracy (standard deviation) approx 1m.
Vertical Accuracy of Lyttelton Vertical Datum 1937 heights (standard deviation) 0.005m.

Heights generated from precise levelling data undertaken to a misclose standard (mm) of 5*sqrt(k) where k is the distance in kilometres. Precise levelling in the Christchurch area was undertaken after the 23 December 2011 earthquake. Other areas were levelled after the most recent earthquake to have affected heights in that area. Heights therefore represent the position of marks accounting for all four substantial Canterbury earthquakes.

These heights are only provisional. Analysis is ongoing as further data is collected.
Heights calculated using SNAP v2.3.64.
Heights were constrained using the pre-earthquake heights at geodetic codes AC9B, AFAQ, AG32 and B853. GNSS observations and modelling indicates that the height change of these marks was negligible.
Some heights were calculated from precise levelling data provided by Christchurch City Council.

These coordinates are suitable for use in surveys and other geospatial activities in Canterbury and Christchurch.

For further information about this dataset, see the Canterbury earthquake information on the LINZ website.

Layer ID 51688
Data type Vector point
Feature count 600
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Orthophotos 1995-1996

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

16819
340
Added
29 Sep 2011

This dataset was first added to LINZ Data Service on 29 Sep 2011.

LINZ publishes 1:25,000 scale orthophotos of New Zealand from its archive. The New Zealand orthophotos shown are historical and no further orthophotos of New Zealand will be published.

Coverage of 1 pixel is 2.5m x 2.5m

Layer ID 51048
Data type Image/Raster
Resolution 2.500m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Magnetic variation points (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

16832
104
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

The angle between the magnetic and geographic (true) north at a location, expressed in degrees east or west from the direction of true north.

S-57 Object Class: Magnetic variation

S-57 Acronym: MAGVAR

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50698
Data type Vector multipoint
Feature count 40
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 11 to 20 of 107