Hurunui District Layers - Page 3

Gate opened and closed to admit or exclude water.

Data Dictionary for floodgate_pnt: docs.topo.linz.govt.nz/data-dictionary/tdd-class-f...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

This layer contains the index tiles for LiDAR data from the Amberley area captured in 2012.
The DEM is available as layer Canterbury - Amberley LiDAR 1m DEM (2012).
The DSM is available as layer Canterbury - Amberley LiDAR 1m DSM (2012).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by Aerial Surveys on 10 and 17 July 2012. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Amberley and Waipara township areas and adjacent coastal strips and river corridors. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is >1 pulse/square metre.

Vertical accuracy specification is +/- 0.20m (95%).
Vertical datum is NZVD2016.

A relatively large natural stream of water.

S-57 Object Class: River

S-57 Acronym: RIVERS

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

LINZ publishes 1:25,000 scale orthophotos of New Zealand from its archive. The New Zealand orthophotos shown are historical and no further orthophotos of New Zealand will be published.

Coverage of 1 pixel is 2.5m x 2.5m

A location of one or more graves not within an officially designated cemetery.

Data Dictionary for grave_pnt: docs.topo.linz.govt.nz/data-dictionary/tdd-class-g...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

The meeting place to which the pilot comes out.

S-57 Object Class: Pilot boarding place

S-57 Acronym: PILBOP

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Index Tiles ONLY, for actual orthophotos see layer Hurunui 0.125m Urban Aerial Photos (2013)

Orthophotography for the Hurunuii District Council taken during the summer of 2012-13. Coverage encompassed the urban areas of the Hurunui district.

Imagery was captured for the ‘Hurunuii District Counci’ by Aerial Surveys Ltd, Unit A1, 8 Saturn Place, Albany,0632, New Zealand.

Data comprises:
•283 x ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:1,000 tile layout
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. The products are tiled into NZTopo50 1:1,000 tiles. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.
Imagery supplied as 12.5cm pixel resolution (0.125m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is +/-0.2m.

A region of permanent ice

Data Dictionary for ice_poly: docs.topo.linz.govt.nz/data-dictionary/tdd-class-i...

This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250

A region of permanent snow.

Data Dictionary for snow_poly: docs.topo.linz.govt.nz/data-dictionary/tdd-class-s...

This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250

This layer contains the index tiles for LiDAR data from the Hawarden area captured in 2015.
The DEM is available as layer Canterbury - Hawarden LiDAR 1m DEM (2015).
The DSM is available as layer Canterbury - Hawarden LiDAR 1m DSM (2015).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by Aerial Surveys on 1 April 2015, under survey name Hurunui. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Hawarden township area. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is 1.3 pulses/square metre.

Vertical accuracy specification is per the ICSM LiDAR Acquisition Specifications and Tender Template NZ Version March 2011.

Vertical datum is NZVD2016.