Timaru District Layers - Page 5

An area containing a concentration of buildings and the supporting road or rail infrastructure.

S-57 Object Class: Built-up area

S-57 Acronym: BUAARE

This data was compiled for the use in the scale range 1:1,500,000 and smaller.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A sea area where dredged material or other potentially more harmful material, e.g. explosives, chemical waste, is deliberately deposited.

S-57 Object Class: Dumping ground

S-57 Acronym: DMPGRD

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

An anomaly of the magnetic field of the Earth, extending over a relatively small area, due to local magnetic influences.

S-57 Object Class: Local magnetic anomaly

S-57 Acronym: LOCMAG

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

This layer contains the DSM for LiDAR data in the Canterbury Region including Amuri Plain, Ashburton, Fairlie Foothills, Pegasus, Motunau, Selwyn North, Selwyn South and Waimate captured between 2018 and 2019.

• The DEM is available as layer Canterbury LiDAR 1m DEM (2018-2019).

• The index tiles are available as layer Canterbury LiDAR 1m Index Tiles (2018-2019).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Environment Canterbury Regional Council by Aerial Surveys between March 2018 and May 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016