Waikuku Layers

A fixed (not afloat) artificial structure between the water and the land, i.e. a man-made coastline.

S-57 Object Class: Shoreline construction

S-57 Acronym: SLCONS

This data was compiled for the use in the scale range 1:350,000 to 1:1,500,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A wet or moist region with water standing on or just below the surface of the ground, and usually covered by a growth of vegetation

Data Dictionary for swamp_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo500 data. The Topo500 map series will, when it is created, provide updated topographic mapping for the New Zealand mainland at 1:500,000 scale.

This layer contains the DEM for LiDAR data in the Canterbury Region surronding Christchurch and the Ashley River between 2018 and 2019.

• The DSM is available as layer Canterbury - Christchurch and Ashley River 1m DSM (2018).

• The index tiles are available as layer Canterbury - Christchurch and Ashley River LiDAR Index Tiles (2018).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Environment Canterbury Regional Council by Aerial Surveys from 20 July 2018 to 01 March 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2.14 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%).

Horizontal Accuracy Specification is +/- 1.0m (95%).

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data in the Canterbury Region surronding Christchurch and the Ashley River between 2018 and 2019.

• The DEM is available as layer Canterbury - Christchurch and Ashley River 1m DEM (2018).

• The index tiles are available as layer Canterbury - Christchurch and Ashley River LiDAR Index Tiles (2018).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Environment Canterbury Regional Council by Aerial Surveys from 20 July 2018 to 01 March 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2.14 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%).

Horizontal Accuracy Specification is +/- 1.0m (95%).

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data in the Canterbury Region including Amuri Plain, Ashburton, Fairlie Foothills, Pegasus, Motunau, Selwyn North, Selwyn South and Waimate captured between 2018 and 2019.

• The DEM is available as layer Canterbury LiDAR 1m DEM (2018).

• The index tiles are available as layer Canterbury LiDAR 1m Index Tiles (2018).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Environment Canterbury Regional Council by Aerial Surveys between March 2018 and May 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016

This layer contains the DEM for LiDAR data in the Canterbury Region including Amuri Plain, Ashburton, Fairlie Foothills, Pegasus, Motunau, Selwyn North, Selwyn South and Waimate captured between 2018 and 2019.

• The DSM is available as layer Canterbury LiDAR 1m DSM (2018).

• The index tiles are available as layer Canterbury LiDAR 1m Index Tiles (2018).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Environment Canterbury Regional Council by Aerial Surveys between March 2018 and May 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016