South Island Pastoral Leases

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

18269
1051
Updated
16 Jun 2019

This dataset was last updated on LINZ Data Service on 16 Jun 2019.

This layer includes the current South Island pastoral leases as at the layer's latest revision date. It excludes pastoral leases that have completed Tenure Review, endowment land, special leases, pastoral occupation licences, pastoral vacant land and special leases.
Lease boundaries have been derived from graphical cadastral line work held in LandOnline which in many cases was itself derived from the Lands and Survey Department's hard copy record sheets. The boundaries of many of these original Run Plans, on which these leases were based, were obtained from early Run Plans, circa 1860. As such please note that THE BOUNDARIES ARE INDICATIVE ONLY.
More information on Pastoral Leases can be found under the Crown Pastoral Land section on the LINZ website

Layer ID 51572
Data type Vector multipolygon
Feature count 181
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ WACA Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3931
71
Updated
16 Jun 2019

This dataset was last updated on LINZ Data Service on 16 Jun 2019.

This layer provides the extents of the data incorporated into an adjustment which has been completed as a Wide Area Cadastral Adjustment (WACA). These adjustments are undertaken in areas where there is already substantial survey-accurate data, but there are some inconsistencies in the data resulting from small changes to geodetic control coordinates and/or the progressive submission of additional Cadastral Survey Datasets (CSDs). The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be no more than 10cm, as the WACAs target areas where coordinates already have fairly high spatial accuracy.

Layer ID 50836
Data type Vector polygon
Feature count 228
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Beacon, isolated danger points (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1898
77
Updated
13 Jun 2019

This dataset was last updated on LINZ Data Service on 13 Jun 2019.

A beacon is a prominent specially constructed object forming a conspicuous mark as a fixed aid to navigation or for use in hydrographic survey. An isolated danger beacon is a beacon erected on an isolated danger of limited extent, which has navigable water all around it.

S-57 Object Class: Beacon, isolated danger

S-57 Acronym: BCNISD

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50527
Data type Vector point
Feature count 14
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Beacon, cardinal points (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2438
84
Updated
13 Jun 2019

This dataset was last updated on LINZ Data Service on 13 Jun 2019.

A beacon is a prominent, specially constructed object forming a conspicuous mark as a fixed aid to navigation or for use in hydrographic survey. A cardinal beacon is used in conjunction with the compass to indicate where the mariner may find the best navigable water. It is placed in one of the four quadrants (North, East, South and West), bounded by inter-cardinal bearings from the point marked.

S-57 Object Class: Beacon, cardinal

S-57 Acronym: BCNCAR

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50526
Data type Vector point
Feature count 36
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Administration Area (Named) polygon (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2816
74
Updated
13 Jun 2019

This dataset was last updated on LINZ Data Service on 13 Jun 2019.

A defined (and possibly named) administrative area.

S-57 Object Class: Administration Area (Named)

S-57 Acronym: ADMARE

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50524
Data type Vector multipolygon
Feature count 34
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Anchorage area polygon (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2454
81
Updated
13 Jun 2019

This dataset was last updated on LINZ Data Service on 13 Jun 2019.

An area in which vessels anchor or may anchor.

S-57 Object Class: Anchorage area

S-57 Acronym: ACHARE

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50521
Data type Vector multipolygon
Feature count 58
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Weed/Kelp points (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2460
101
Updated
13 Jun 2019

This dataset was last updated on LINZ Data Service on 13 Jun 2019.

Seaweed is the general name for marine plants of the Algae class which grow in long narrow ribbons. Kelp is one of an order (laminariales) of usually large, blade-shaped or vine-like brown algae.

S-57 Object Class: Weed/Kelp

S-57 Acronym: WEDKLP

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50517
Data type Vector point
Feature count 61
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Mooring/Warping facility points (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2537
65
Updated
13 Jun 2019

This dataset was last updated on LINZ Data Service on 13 Jun 2019.

The equipment or structure used to secure a vessel.

S-57 Object Class: Mooring/Warping facility

S-57 Acronym: MORFAC

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50472
Data type Vector point
Feature count 5
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Marine farm/culture points (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2560
93
Updated
13 Jun 2019

This dataset was last updated on LINZ Data Service on 13 Jun 2019.

An assemblage of cages, nets, rafts and floats or posts where fish, including shellfish, are artificially cultivated. Also called fish farm.

S-57 Object Class: Marine farm/culture

S-57 Acronym: MARCUL

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50470
Data type Vector point
Feature count 214
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Cable, overhead polyline (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2414
65
Updated
13 Jun 2019

This dataset was last updated on LINZ Data Service on 13 Jun 2019.

An overhead cable is an assembly of wires or fibres, or a wire rope or chain, which is supported by structures such as poles or pylons and passing over or nearby navigable waters.

S-57 Object Class: Cable, overhead

S-57 Acronym: CBLOHD

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50438
Data type Vector multilinestring
Feature count 42
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 113