Marlborough District Layers - Page 7

This layer contains the Index Tiles for LiDAR data from Blenheim, the Wairau valley region and lower Awatere river corridor captured in 2014.

• The DEM is available as layer Marlborough - Blenheim LiDAR 1m DEM (2014).

• The DSM is available as layer Marlborough - Blenheim LiDAR 1m DSM (2014).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Marlborough District Council by New Zealand Aerial Mapping in February and May 2014. The datasets were generated by New Zealand Aerial Mapping and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is 1.4 pulses/square metre in open ground.

Vertical datum is NZVD2016.

Index Tiles ONLY, for actual orthophotos see layer Marlborough 0.75m Rural Aerial Photos (2005)

Orthophotography for the Marlborough region taken during 2005. Coverage encompassed parts of the Marlborough District Councils area.

Imagery was captured for the Marlborough District Councils.
The prodiver of this imagery was Terralink International.

Data has subsequently been provided to LINZ and this comprises:
• 463 x ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into 1:5,000 tiles.
•Tile layout in NZTM projection.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. The products are tiled into 1:5,000 tiles. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 75cm pixel resolution (0.75m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy varies between +/-10m for flat areas and +/- 20 for hilly areas.

Tile dimensions are 2400m and 3600m.

LINZ publishes 1:25,000 scale orthophotos of New Zealand from its archive. The New Zealand orthophotos shown are historical and no further orthophotos of New Zealand will be published.

Coverage of 1 pixel is 2.5m x 2.5m

Index Tiles ONLY, for actual orthophotos see layer Marlborough 0.4m Rural Aerial Photos (2008)

Orthophotography for the Marlborough region taken during 2008. Coverage encompassed parts of the Marlborough District Councils area.

Imagery was captured for the Marlborough District Councils.
The prodiver of this imagery was Terralink International.

Data has subsequently been provided to LINZ and this comprises:
• 1,091 x ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:2,000 tile layout.
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. The products are tiled into NZTopo50 1:2,000 tiles. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 40cm pixel resolution (0.4m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is +/-2.0m (@ 90% confidence) - please refer to the supplied tile layout shape file for specific details.

Also called radio reporting points, they have been established in certain busy waterways and port approaches to assist traffic control. On passing these points or crossing a defined line vessels are required to report on VHF to a Traffic Control Centre.

S-57 Object Class: Radio calling-in point

S-57 Acronym: RDOCAL

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Index Tiles ONLY, for actual orthophotos see layer Marlborough 1m Rural Aerial Photos (2002)

Orthophotography for the Marlborough region taken during 2002. Coverage encompassed parts of the Marlborough District Councils area.

Imagery was captured for the Marlborough District Councils.
The prodiver of this imagery was Terralink International.

Data has subsequently been provided to LINZ and this comprises:
• 97 x ortho-rectified RGB GeoTIFF images, tiled into 1:10,000 tiles.
•Tile layout.

The products are tiled into 1:5,000 tiles. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 100cm pixel resolution (1m GSD), Black and White GeoTIFF. The final spatial accuracy varies between +/-10m for flat areas and +/- 20 for hilly areas.

Tile dimensions are 2400m and 3600m.

Raster chart image of: NZ 6151 Plans in the Marlborough Sounds: Forsyth and Guards Bays

This data was compiled for the use at the following scale: 30000

File reference: NZ615101.tif

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

A facility where aircraft can take off and land; usually consists of hard-surfaced landing strips, a control tower, hangars and accommodation for passengers and cargo

Data Dictionary for airport_pnt: docs.topo.linz.govt.nz/data-dictionary/tdd-class-a...

This layer is a component of the Topo500 data. The Topo500 map series will, when it is created, provide updated topographic mapping for the New Zealand mainland at 1:500,000 scale.

Also called radio reporting points, they have been established in certain busy waterways and port approaches to assist traffic control. On passing these points or crossing a defined line vessels are required to report on VHF to a Traffic Control Centre.

S-57 Object Class: Radio calling-in point

S-57 Acronym: RDOCAL

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

An artificial bank of earth and or stone built above the natural surface

Data Dictionary for embankment_cl: docs.topo.linz.govt.nz/data-dictionary/tdd-class-e...

This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250