Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 31 Jul 2020.
A beacon is a prominent, specially constructed object forming a conspicuous mark as a fixed aid to navigation or for use in hydrographic survey. A cardinal beacon is used in conjunction with the compass to indicate where the mariner may find the best navigable water. It is placed in one of the four quadrants (North, East, South and West), bounded by inter-cardinal bearings from the point marked.
S-57 Object Class: Beacon, cardinal
S-57 Acronym: BCNCAR
This data was compiled for the use in the scale range 1:22,000 to 1:90,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50526 |
---|---|
Data type | Vector multipoint | Feature count | 37 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 24 Nov 2020.
Any structure on a waterfront, designed to make it possible for vessels to lie alongside and take or unload cargo, passengers etc.
Data Dictionary for wharf_edge: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...
This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.
Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250
Layer ID | 50199 |
---|---|
Data type | Vector linestring | Feature count | 14 |
Primary key | t250_fid |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 31 Jul 2020.
A long heavy timber or section of steel, wood, concrete, etc.. forced into the earth which may serve as a support, as for a pier, or a free standing pole within a marine environment.
S-57 Object Class: Pile
S-57 Acronym: PILPNT
This data was compiled for the use in the scale range 1:22,000 to 1:90,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50590 |
---|---|
Data type | Vector multipoint | Feature count | 95 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 28 Jan 2020.
A floating structure, usually rectangular in shape which serves as landing, pier head or bridge support.
S-57 Object Class: Pontoon
S-57 Acronym: PONTON
This data was compiled for the use in the scale range 1:4,000 to 1:22,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50717 |
---|---|
Data type | Vector multilinestring | Feature count | 103 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 28 Jan 2020.
An area in which vessels anchor or may anchor.
S-57 Object Class: Anchorage area
S-57 Acronym: ACHARE
This data was compiled for the use in the scale range 1:22,000 to 1:90,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50521 |
---|---|
Data type | Vector multipolygon | Feature count | 58 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 28 Jan 2020.
An overhead cable is an assembly of wires or fibres, or a wire rope or chain, which is supported by structures such as poles or pylons and passing over or nearby navigable waters.
S-57 Object Class: Cable, overhead
S-57 Acronym: CBLOHD
This data was compiled for the use in the scale range 1:22,000 to 1:90,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50545 |
---|---|
Data type | Vector multilinestring | Feature count | 82 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 28 Jan 2020.
An area containing a concentration of buildings and the supporting road or rail infrastructure.
S-57 Object Class: Built-up area
S-57 Acronym: BUAARE
This data was compiled for the use in the scale range 1:350,000 to 1:1,500,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50382 |
---|---|
Data type | Vector multipolygon | Feature count | 24 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 28 Jan 2020.
The equipment or structure used to secure a vessel.
S-57 Object Class: Mooring/Warping facility
S-57 Acronym: MORFAC
This data was compiled for the use in the scale range 1:90,000 to 1:350,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50472 |
---|---|
Data type | Vector multipoint | Feature count | 5 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 28 Jan 2020.
A beacon is a prominent specially constructed object forming a conspicuous mark as a fixed aid to navigation or for use in hydrographic survey. An isolated danger beacon is a beacon erected on an isolated danger of limited extent, which has navigable water all around it.
S-57 Object Class: Beacon, isolated danger
S-57 Acronym: BCNISD
This data was compiled for the use in the scale range 1:22,000 to 1:90,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50527 |
---|---|
Data type | Vector multipoint | Feature count | 15 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |