Saxton Island Layers

An assemblage of cages, nets, rafts and floats or posts where fish, including shellfish, are artificially cultivated. Also called fish farm.

S-57 Object Class: Marine farm/culture

S-57 Acronym: MARCUL

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A course laid out for racing

Data Dictionary for racetrack_pnt: docs.topo.linz.govt.nz/data-dictionary/tdd-class-r...

This layer is a component of the Topo500 data. The Topo500 map series will, when it is created, provide updated topographic mapping for the New Zealand mainland at 1:500,000 scale.

A buoy is a floating object moored to the bottom in a particular place, as an aid to navigation or for other specific purposes. A lateral buoy is used to indicate the port or starboard hand side of the route to be followed. They are generally used for well defined channels and are used in conjunction with a conventional direction of buoyage.

S-57 Object Class: Buoy, lateral

S-57 Acronym: BOYLAT

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

This layer contains the DEM for LiDAR data in the Tasman Region over Motueka, Moutere and Waimea captured between 14 October 2022 and 7 November 2022.

• The DSM is available as layer Tasman - Tasman Bay LiDAR 1m DSM (2022).

• The Index Tiles are available as layer Tasman - Tasman Bay LiDAR Index Tiles (2022).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Tasman District Council by Aerial Surveys between 14 October 2022 and 7 November 2022. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 4 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%)
Horizontal Accuracy Specification is +/- 1.0m (95%)

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data in the Tasman Region over Motueka, Moutere and Waimea captured between 14 October 2022 and 7 November 2022.

• The DEM is available as layer Tasman - Tasman Bay LiDAR 1m DEM (2022).

• The Index Tiles are available as layer Tasman - Tasman Bay LiDAR Index Tiles (2022).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Tasman District Council by Aerial Surveys between 14 October 2022 and 7 November 2022. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 4 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%)
Horizontal Accuracy Specification is +/- 1.0m (95%)

Vertical datum is NZVD2016.

This layer contains the index tiles for LiDAR data in the Tasman Region over Motueka, Moutere and Waimea captured between 14 October 2022 and 7 November 2022.

• The DEM is available as layer Tasman - Tasman Bay LiDAR 1m DEM (2022).

• The DSM is available as layer Tasman - Tasman Bay LiDAR 1m DSM (2022).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Tasman District Council by Aerial Surveys between 14 October 2022 and 7 November 2022. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 4 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%)
Horizontal Accuracy Specification is +/- 1.0m (95%)

Vertical datum is NZVD2016.