Otago Region Layers - Page 7

An area containing at least one runway, used for landing, take-off, and movement of aircraft.

S-57 Object Class: Airport/airfield

S-57 Acronym: AIRARE

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Raster chart image of: NZ 6612 Otago Harbour S

This data was compiled for the use at the following scale: 16000

File reference: NZ661202.tif

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

A region of permanent snow.

Data Dictionary for snow_poly: docs.topo.linz.govt.nz/data-dictionary/tdd-class-s...

This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250

LINZ publishes 1:25,000 scale orthophotos of New Zealand from its archive. The New Zealand orthophotos shown are historical and no further orthophotos of New Zealand will be published.

Coverage of 1 pixel is 2.5m x 2.5m

This layer contains the DEM for LiDAR data from the Queenstown Area of the Otago District captured in 2016.

• The DSM is available as layer Otago - Queenstown LiDAR 1m DSM (2016).

• The index tiles are available as layer Otago - Queenstown LiDAR Index Tiles (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Otago Regional Council by Aerial Surveys in March and April 2016. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.044m (95%).

Vertical datum is NZVD2016.

A mill or other machine that runs on the energy generated by a wheel of adjustable blades or flats rotated by the wind

Data Dictionary for windmill_pnt: docs.topo.linz.govt.nz/data-dictionary/tdd-class-w...

This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250

This layer provides the extents of the data incorporated into an adjustment which has been completed as part of the Spatial Parcel Improvement (SPI) project. The SPI project aims to improve the accuracy of digital cadastral data in areas (primarily rural) where survey-accurate data does not currently exist. The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be at least several metres, as the SPI project targets areas where significant movements are expected.

A structure built to break the force of waves to protect a beach, harbour or other waterfront facility.

Data Dictionary for breakwater_cl: docs.topo.linz.govt.nz/data-dictionary/tdd-class-b...

This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250

An overhead cable is an assembly of wires or fibres, or a wire rope or chain, which is supported by structures such as poles or pylons and passing over or nearby navigable waters.

S-57 Object Class: Cable, overhead

S-57 Acronym: CBLOHD

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

LINZ publishes 1:25,000 scale orthophotos of New Zealand from its archive. The New Zealand orthophotos shown are historical and no further orthophotos of New Zealand will be published.

Coverage of 1 pixel is 2.5m x 2.5m