Building, single polygon (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4689
78
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

A relatively permanent structure, roofed and usually walled. It is designed for some particular use which it may be important to indicate.

S-57 Object Class: Building, single

S-57 Acronym: BUISGL

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50436
Data type Vector multipolygon
Feature count 16
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Stewart Island 1977 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4959
16
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The STI77-NZVD2016 grid enables the conversion of normal-orthometric heights from the Stewart Island 1977 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

STI77-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Stewart Island 1977 vertical datum (167.2° E to 168.8° E, 46.5° S to 47.5° S).

The height conversion grid models the difference between the Stewart Island 1977 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of STI77-NZVD2016 is better than 18 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53442
Data type Vector point
Feature count 1519
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Cable, overhead polyline (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4649
84
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

An overhead cable is an assembly of wires or fibres, or a wire rope or chain, which is supported by structures such as poles or pylons and passing over or nearby navigable waters.

S-57 Object Class: Cable, overhead

S-57 Acronym: CBLOHD

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50438
Data type Vector multilinestring
Feature count 42
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Pylon/bridge support points (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4753
73
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

A vertical construction consisting, for example, of a steel framework or pre-stressed concrete to carry cables, a bridge, etc.

S-57 Object Class: Pylon/bridge support

S-57 Acronym: PYLONS

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50485
Data type Vector multipoint
Feature count 6
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Stewart Island 1977 to NZGD2000 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4891
16
Updated
09 Aug 2016

This dataset was last updated on LINZ Data Service on 09 Aug 2016.

The STI77-NZGD2000 grid enables the conversion of normal-orthometric heights from the Stewart Island 1977 local vertical datum directly to New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights.

STI77-NZGD2000 is published on a one arc-minute grid (approximately 1.8 kilometres) extending over the benchmarks that nominally define the extent of the Stewart Island 1977 vertical datum (167.2° E to 168.8° E, 46.5° S to 47.5° S).
The conversion value is represented by the attribute “delta”, in metres.

This grid is a combination of New Zealand Quasigeoid 2016 NZGeoid2016 and the STI77-NZVD2016 height conversion grid. Where NZGeoid2016 is the reference surface for the New Zealand Vertical Datum 2016 (NZVD2016), while the STI77-NZVD2016 grid models the difference between the Stewart Island 1977 vertical datum and NZVD2016 using the LINZ GPS-levelling marks.

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53441
Data type Vector point
Feature count 5917
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Local magnetic anomaly polygon (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4753
63
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

An anomaly of the magnetic field of the Earth, extending over a relatively small area, due to local magnetic influences.

S-57 Object Class: Local magnetic anomaly

S-57 Acronym: LOCMAG

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50575
Data type Vector multipolygon
Feature count 5
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Track Centrelines (Topo, 1:500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4623
203
Added
22 May 2011

This dataset was first added to LINZ Data Service on 22 May 2011.

A deliberately formed route of a lesser quality than a road

Data Dictionary for track_cl: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo500 data. The Topo500 map series will, when it is created, provide updated topographic mapping for the New Zealand mainland at 1:500,000 scale.

Layer ID 50231
Data type Vector linestring
Feature count 104
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Sloping ground points (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4620
77
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

An inclined surface.

S-57 Object Class: Sloping ground

S-57 Acronym: SLOGRD

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50743
Data type Vector multipoint
Feature count 45
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Water turbulence polygon (Hydro, 1:1.5mil and smaller)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4759
33
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

The disturbance of water caused by the interaction of any combination of waves, currents, tidal streams, wind, shoal patches and obstructions.

S-57 Object Class: Water turbulence

S-57 Acronym: WATTUR

This data was compiled for the use in the scale range 1:1,500,000 and smaller.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 51604
Data type Vector multipolygon
Feature count 1
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Dunedin-Bluff 1960 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4800
24
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The DBL60-NZVD2016 grid enables the conversion of normal-orthometric heights from the Dunedin-Bluff 1960 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.
DBL60-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Dunedin-Bluff 1960 vertical datum (167.4° E to 169.9° E, 45.0° S to 46.7° S).

The height conversion grid models the difference between the Dunedin-Bluff 1960 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of DBL60-NZVD2016 is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53426
Data type Vector point
Feature count 3952
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 121 to 130 of 171