NZ Beacon Points (Topo, 1:500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4181
107
Added
22 May 2011

This dataset was first added to LINZ Data Service on 22 May 2011.

A fixed signal, mark or light erected for the guidance of mariners or aeroplane pilots.

Data Dictionary for beacon_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo500 data. The Topo500 map series will, when it is created, provide updated topographic mapping for the New Zealand mainland at 1:500,000 scale.

Layer ID 50202
Data type Vector point
Feature count 39
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Water turbulence points (Hydro, 1:350k - 1:1,500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4233
45
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

The disturbance of water caused by the interaction of any combination of waves, currents, tidal streams, wind, shoal patches and obstructions.

S-57 Object Class: Water turbulence

S-57 Acronym: WATTUR

This data was compiled for the use in the scale range 1:350,000 to 1:1,500,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50422
Data type Vector multipoint
Feature count 5
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Dunedin-Bluff 1960 to NZGD2000 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4238
15
Updated
02 Aug 2016

This dataset was last updated on LINZ Data Service on 02 Aug 2016.

The DBL60-NZGD2000 grid enables the conversion of normal-orthometric heights from the Dunedin-Bluff 1960 local vertical datum directly to New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights.

DBL60-NZGD2000 is published on a one arc-minute grid (approximately 1.8 kilometres) extending over the benchmarks that nominally define the extent of the Dunedin-Bluff 1960 vertical datum (167.4° E to 169.9° E, 45.0° S to 46.7° S).

The conversion value is represented by the attribute “delta”, in metres.

This grid is a combination of New Zealand Quasigeoid 2016 NZGeoid2016 and the DBL60-NZVD2016 height conversion grid. Where NZGeoid2016 is the reference surface for the New Zealand Vertical Datum 2016 (NZVD2016), while the DBL60-NZVD2016 grid models the difference between the Dunedin-Bluff 1960 vertical datum and NZVD2016 using the LINZ GPS-levelling marks.

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53425
Data type Vector point
Feature count 15553
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Chart NZ 29 Stewart Island / Rakiura to Campbell Island / Motu Ihupuku

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4163
86
Updated
27 Jun 2016

This dataset was last updated on LINZ Data Service on 27 Jun 2016.

Raster chart image of: NZ 29 Stewart Island / Rakiura to Campbell Island / Motu Ihupuku

This data was compiled for the use at the following scale: 1:1250000

File reference: NZ2901

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

Layer ID 51237
Data type Image/Raster
Resolution About 43.456m
Services Web Map Service (WMS), Catalog Service (CS-W), data.govt.nz Atom Feed

Bluff 1955 to NZGD2000 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4224
15
Updated
02 Aug 2016

This dataset was last updated on LINZ Data Service on 02 Aug 2016.

The BLF55-NZGD2000 grid enables the conversion of normal-orthometric heights from the Bluff 1955 local vertical datum directly to New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights.

BLF55-NZGD2000 is published on a one arc-minute grid (approximately 1.8 kilometres) extending over the benchmarks that nominally define the extent of the Bluff 1955 vertical datum (168.2° E to 168.9° E, 46.3° S to 46.8° S).

The conversion value is represented by the attribute “delta”, in metres.

This grid is a combination of New Zealand Quasigeoid 2016 NZGeoid2016 and the BLF55-NZVD2016 height conversion grid. Where NZGeoid2016 is the reference surface for the New Zealand Vertical Datum 2016 (NZVD2016), while the BLF55-NZVD2016 grid models the difference between the Bluff 1955 vertical datum and NZVD2016 using the LINZ GPS-levelling marks.

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53423
Data type Vector point
Feature count 1333
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Dredged area polygon (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4122
97
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

An area of the bottom of a body of water which has been deepened by dredging.

S-57 Object Class: Dredged area

S-57 Acronym: DRGARE

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50450
Data type Vector multipolygon
Feature count 4
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Rock Polygons (Topo, 1:500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3988
157
Added
22 May 2011

This dataset was first added to LINZ Data Service on 22 May 2011.

Coastal rocks; rocks between high and low tide

Data Dictionary for rock_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo500 data. The Topo500 map series will, when it is created, provide updated topographic mapping for the New Zealand mainland at 1:500,000 scale.

Layer ID 50227
Data type Vector polygon
Feature count 343
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Beacon, isolated danger points (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4052
92
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

A beacon is a prominent specially constructed object forming a conspicuous mark as a fixed aid to navigation or for use in hydrographic survey. An isolated danger beacon is a beacon erected on an isolated danger of limited extent, which has navigable water all around it.

S-57 Object Class: Beacon, isolated danger

S-57 Acronym: BCNISD

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50527
Data type Vector multipoint
Feature count 15
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Water Race Centrelines (Topo, 1:250k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3805
277
Updated
17 Feb 2020

This dataset was last updated on LINZ Data Service on 17 Feb 2020.

A man-made water channel, often running parallel to the contours, built specifically for the distribution of water to crops, pasture, mining activities etc

Data Dictionary for water_race_cl: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250

Layer ID 50196
Data type Vector linestring
Feature count 272
Primary key t250_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Pontoon polygons (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3870
72
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

A floating structure, usually rectangular in shape which serves as landing, pier head or bridge support.

S-57 Object Class: Pontoon

S-57 Acronym: PONTON

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50718
Data type Vector multipolygon
Feature count 9
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 141 to 150 of 171