Wellington Region Layers - Page 6

Index Tiles ONLY, for actual orthophotos see layer Wellington 0.3m Rural Aerial Photos (2016-2017)

Orthophotography in the Wellington region taken in the flying seasons (summer period) 2016-17.

Imagery was captured for the ‘Greater Wellington Regional Council’ by AAM NZ Limited, 6 Ossian St, NAPIER, New Zealand.

Data comprises:
•1,073 ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:5,000 tile layout
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. The products are tiled into NZTopo50 1:5,000 tiles. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 30cm pixel resolution (0.30m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is ±2.0 m @ 90% confidence level.

Index Tiles ONLY, for actual orthophotos see layer Kapiti Coast 0.10m Urban Aerial Photos (2017)

Orthophotography of urbans areas within Kapiti Coast District taken in the flying seasons (summer period) 2016-17.

Imagery was captured for the ‘Kapiti Coast District Council’ by AAM NZ Limited, 6 Ossian St, NAPIER, New Zealand.

Data comprises:
•2,685 ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:500 tile layout
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. The products are tiled into NZTopo50 1:500 tiles. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 10cm pixel resolution (0.10m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is ± 0.2m @ 90% confidence level.

A fixed (not afloat) artificial structure between the water and the land, i.e. a man-made coastline.

S-57 Object Class: Shoreline construction

S-57 Acronym: SLCONS

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A location of one or more graves not within an officially designated cemetery.

Data Dictionary for grave_pnt: docs.topo.linz.govt.nz/data-dictionary/tdd-class-g...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Index Tiles ONLY, for actual orthophotos see layer Wellington 0.10m Urban Aerial Photos (2017)

Orthophotography of urbans areas within Wellington City taken in the flying seasons (summer period) 2016-17.

Imagery was captured for the ‘Wellington City Council’ by AAM NZ Limited, 6 Ossian St, NAPIER, New Zealand.

Data comprises:
•1,667 ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:500 tile layout
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. The products are tiled into NZTopo50 1:500 tiles. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 10cm pixel resolution (0.10m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is ± 0.2m @ 90% confidence level.

A beacon is a prominent specially constructed object forming a conspicuous mark as a fixed aid to navigation or for use in hydrographic survey. A special purpose beacon is primarily used to indicate an area or feature, the nature of which is apparent from reference to a chart, Sailing Directions or Notices to Mariners. Beacon in general: A beacon whose appearance or purpose is not adequately known.

S-57 Object Class: Beacon, special purpose/general

S-57 Acronym: BCNSPP

This data was compiled for the use in the scale range 1:350,000 to 1:1,500,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Index Tiles ONLY, for actual orthophotos see layer Porirua 0.075m Urban Aerial Photos (2016)

Orthophotography over Porirua City taken in the flying season (summer period) 2015 -16.

Imagery was captured for the ‘Porirua City Council’ by AAM NZ Limited, 6 Ossian St, NAPIER, New Zealand.

Data has subsequently been provided to LINZ and this comprises:
• 249 x ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:1,000 tile layout
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. The products are tiled into NZTopo50 1:1,000 tiles. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 7.5cm pixel resolution (0.075m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is Generally +/-0.5m GSD (90% Confidence), but worse in hilly areas,

A pipeline is a string of interconnected pipes used for the transport of matter, nowadays mainly oil or gas. A submarine or land pipeline is a pipeline lying on or buried under the seabed or the land.

S-57 Object Class: Pipeline, submarine/on land

S-57 Acronym: PIPSOL

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

An area of land set aside for fire-arms practise

Data Dictionary for rifle_range_poly: docs.topo.linz.govt.nz/data-dictionary/tdd-class-r...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

The WGN53-NZGD2000 grid enables the conversion of normal-orthometric heights from the Wellington 1953local vertical datum directly to New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights.

WGN53-NZGD2000 is published on a one arc-minute grid (approximately 1.8 kilometres) extending over the benchmarks that nominally define the extent of the Wellington 1953 vertical datum (174.4° E to 176.4° E, 39.1° S to 41.6° S).

The conversion value is represented by the attribute “delta”, in metres.

This grid is a combination of New Zealand Quasigeoid 2016 NZGeoid2016 and the WGN53-NZVD2016 height conversion grid. Where NZGeoid2016 is the reference surface for the New Zealand Vertical Datum 2016 (NZVD2016), while the WGN53-NZVD2016 grid models the difference between the Wellington 1953 vertical datum and NZVD2016 using the LINZ GPS-levelling marks.

More information on converting heights between vertical datums can be found on the LINZ website.