NZ WACA Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5415
72
Updated
16 Nov 2019

This dataset was last updated on LINZ Data Service on 16 Nov 2019.

This layer provides the extents of the data incorporated into an adjustment which has been completed as a Wide Area Cadastral Adjustment (WACA). These adjustments are undertaken in areas where there is already substantial survey-accurate data, but there are some inconsistencies in the data resulting from small changes to geodetic control coordinates and/or the progressive submission of additional Cadastral Survey Datasets (CSDs). The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be no more than 10cm, as the WACAs target areas where coordinates already have fairly high spatial accuracy.

Layer ID 50836
Data type Vector polygon
Feature count 228
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ SPI Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5346
82
Updated
16 Nov 2019

This dataset was last updated on LINZ Data Service on 16 Nov 2019.

This layer provides the extents of the data incorporated into an adjustment which has been completed as part of the Spatial Parcel Improvement (SPI) project. The SPI project aims to improve the accuracy of digital cadastral data in areas (primarily rural) where survey-accurate data does not currently exist. The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be at least several metres, as the SPI project targets areas where significant movements are expected.

Layer ID 50835
Data type Vector polygon
Feature count 394
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Strata Parcels

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9051
478
Updated
16 Nov 2019

This dataset was last updated on LINZ Data Service on 16 Nov 2019.

This layer provides the current strata parcel polygons and their associated descriptive data as a single layer to facilitate their use independently of other primary parcels or non primary parcels.

Strata parcels are portions of land where the vertical extent is limited.

The combination of this layer with the primary parcels layer provides all current parcels for New Zealand (i.e. excludes Historic and Pending parcels)

If you require approved or historic parcels see the All Parcels Layer

This layer has a nominal accuracy of 0.1-1m in urban areas and 1-100m in rural areas. For more detailed information about parcel accuracies please refer to the Survey Boundary Marks layer which contains accuracies for each parcel node.

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see

Layer ID 50780
Data type Vector multipolygon
Feature count 623
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Wellington 1953 to NZVD2016 Conversion Raster

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1205
6
Added
07 Oct 2019

This dataset was first added to LINZ Data Service on 07 Oct 2019.

The Wellington 1953 to NZVD2016 Conversion Raster provides users with a two arc-minute (approximately 3.6 kilometres) raster image of the conversion of normal-orthometric heights from the Wellington 1953 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.
This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

The height conversion grid models the difference between the Wellington 1953 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 103964
Data type Grid
Resolution About 3236.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Wreck Points (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8514
596
Updated
21 Oct 2019

This dataset was last updated on LINZ Data Service on 21 Oct 2019.

A wrecked vessel, either submerged or visible which is attached to or foul of the bottom or cast up on the shore; or a greatly disabled or damaged vehicle

Data Dictionary for wreck_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50379
Data type Vector point
Feature count 51
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Well Points (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8985
529
Updated
21 Oct 2019

This dataset was last updated on LINZ Data Service on 21 Oct 2019.

A pit or hole dug or bored into the earth

Data Dictionary for well_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50375
Data type Vector point
Feature count 106
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Weir Centrelines (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8395
517
Updated
21 Oct 2019

This dataset was last updated on LINZ Data Service on 21 Oct 2019.

An artificial barrier placed in an open channel and over which the water flows

Data Dictionary for weir_cl: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50374
Data type Vector linestring
Feature count 48
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Tower Points (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9023
593
Updated
21 Oct 2019

This dataset was last updated on LINZ Data Service on 21 Oct 2019.

A tall framework or structure, the elevation of which is functional

Data Dictionary for tower_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50363
Data type Vector point
Feature count 51
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Sportsfield Polygons (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7380
687
Updated
21 Oct 2019

This dataset was last updated on LINZ Data Service on 21 Oct 2019.

A field on which sporting activities are carried out

Data Dictionary for sportsfield_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50355
Data type Vector polygon
Feature count 23
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Slipway Centrelines (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8442
474
Updated
21 Oct 2019

This dataset was last updated on LINZ Data Service on 21 Oct 2019.

Ship building or landing slip

Data Dictionary for slipway_cl: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50351
Data type Vector linestring
Feature count 31
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 128