NZ Christchurch Post-EQ Survey-Accurate (SDC) Boundary Coordinates

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

13712
589
Added
22 Feb 2015

This dataset was first added to LINZ Data Service on 22 Feb 2015.

For further information about this dataset, see the Canterbury earthquake information.

Coordinates computed by adding the effects of deep-seated movement to survey points that had authoritative survey-accurate digital cadastre (SDC) coordinates immediately prior to 4 September 2010 (the first Canterbury earthquake). Marks that did not have SDC status at that time are not included in the dataset. Deep-seated movements were evaluated using the NZGD2000 deformation model.

  • The 'nod_id' column is the Landonline node id. This is the unique identifier for the mark.
  • The 'current_name' column is the Landonline mark name. Many boundary marks do not have a name recorded in this dataset, because this information has not been digitally captured.
  • The 'east_mtpleatm2000' and 'north_mtpleatm2000' columns are the east and north coordinates (metres) in terms of the Mt Pleasant 2000 transverse mercator projection. Rounded to the nearest centimetre.
  • The 'coord_order' column is the Landonline coordinate order immediately prior to 4 September 2010.

The estimated absolute uncertainty of these coordinates is 0.09m at the 95% confidence level.

These coordinates are intended for the use of Licensed Cadastral Surveyors when locating boundaries in Christchurch, in accordance with the Rules for Cadastral Survey 2010 and associated guidance, particularly guidance relating to the earthquakes.

Layer ID 52350
Data type Vector point
Feature count 415489
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Christchurch Post-EQ Survey-Accurate (SDC) Non-Boundary Coordinates

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12915
651
Added
22 Feb 2015

This dataset was first added to LINZ Data Service on 22 Feb 2015.

For further information about this dataset, see the Canterbury earthquake information.

Coordinates computed by adding the effects of deep-seated movement to survey points that had authoritative survey-accurate digital cadastre (SDC) coordinates immediately prior to 4 September 2010 (the first Canterbury earthquake). Marks that did not have SDC status at that time are not included in the dataset. Deep-seated movements were evaluated using the NZGD2000 deformation model.

  • The 'nod_id' column is the Landonline node id. This is the unique identifier for the mark.
  • The 'current_name' column is the Landonline mark name.
  • The 'east_mtpleatm2000' and 'north_mtpleatm2000' columns are the east and north coordinates (metres) in terms of the Mt Pleasant 2000 transverse mercator projection. Rounded to the nearest centimetre.
  • The 'coord_order' column is the Landonline coordinate order immediately prior to 4 September 2010.

The estimated absolute uncertainty of these coordinates is 0.09m at the 95% confidence level.

These coordinates are intended for the use of Licensed Cadastral Surveyors when locating boundaries in Christchurch, in accordance with the Rules for Cadastral Survey 2010 and associated guidance, particularly guidance relating to the earthquakes.

Layer ID 52349
Data type Vector point
Feature count 50181
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Canterbury Earthquake Geodetic Marks (2010, 2011) - Comprehensive

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

13304
266
Added
26 Apr 2013

This dataset was first added to LINZ Data Service on 26 Apr 2013.

The Canterbury region of New Zealand experienced a sequence of significant earthquakes during 2010 and 2011. These earthquakes occurred on 2010-09-04, 2011-02-22, 2011-06-13 and 2011-12-23. This layer contains coordinates computed from GNSS fast static and network RTK surveys undertaken after the Canterbury earthquakes. It also includes Lyttelton Vertical Datum 1937 and Christchurch Drainage Datum heights, derived from the GNSS data.

Users may also be interested in the simplified data in the companion layer Canterbury Earthquake Geodetic Marks (2010, 2011) - Simple.

These coordinates are only provisional. Analysis is ongoing as further data is collected. Coordinates were calculated using SNAP v2.3.61. Stations were constrained using coordinates calculated by GNS Science. Some coordinates were calculated from data provided by Christchurch City Council and other public and private organisations. No precise levelling data has been used.

The uncertainty (one standard deviation) is 0.02m horizontally, and 0.03m vertically for NZGD2000 ellipsoidal heights. The uncertainty (one standard deviation) of the Lyttelton Vertical Datum 1937 and Christchurch Drainage Datum heights is 0.05m.

The coordinates calculated prior to 2010-09-04 have been calculated from a combined adjustment including LINZ data and additional data provided by public and private organisations. These coordinates differ from those in the Geodetic Database and more accurately reflect the position of the mark immediately prior to the 2010-09-04 earthquake.

The deformation model igns2011_working.grd calculated from a model (v4) provided by GNS Science on 28 April 2011 was used to remove secular deformation.

Lyttelton Vertical Datum 1937 heights have been computed from NZGD2000 ellipsoidal heights by subtracting NZGeoid2009 geoid heights and adding an offset of 0.47m to bring in terms of Lyttelton Vertical Datum 1937. Christchurch Drainage Datum (CDD) heights have been computed in the Christchurch area from NZGD2000 ellipsoidal heights by subtracting NZGeoid2009 geoid heights and adding an offset of 0.523m (specifically calculated for Christchurch City) to bring in terms of Lyttelton Vertical Datum 1937 (for Christchurch) and a further offset of 9.04m to bring in terms of CDD.

The model used to estimate whether movements greater than 2cm occurred at a mark (excluding those due to liquefaction or other localised deformation) after the 2010-09-04 earthquake was provided by GNS Science (Darfield_Sep2010_model_8.5_grid_displacements_calcs.xls). The model used to estimate whether movements greater than 2cm occurred at a mark (excluding those due to liquefaction or other localised deformation) after the 2011-02-22 earthquake was provided by GNS Science (Chch_Feb2011_geodetic_source_model_3.21.xls). The model used to estimate whether movements greater than 2cm occurred at a mark (excluding those due to liquefaction or other localised deformation) after the 2011-06-13 earthquake was provided by GNS Science (Chch_Jun2011_geodetic_source_model_0.4.xls). The model used to estimate whether movements greater than 2cm occurred at a mark (excluding those due to liquefaction or other localised deformation) after the 2011-12-23 earthquake was provided by GNS Science (Chch_Dec2011_geodetic_source_model_0.2.xls).

These coordinates are suitable for use in surveys and other geospatial activities in Canterbury and Christchurch.

For full information about this dataset, see the Canterbury earthquake information on the LINZ website.

Layer ID 51588
Data type Vector point
Feature count 818
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Auckland 1946 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12372
171
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The AUK46-NZVD2016 grid enables the conversion of normal-orthometric heights from the Auckland 1946 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

AUK46-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Auckland 1946 vertical datum (174.0° E to 176.2° E, 36.1° S to 38.0° S).

The height conversion grid models the difference between the Auckland 1946 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of AUK46-NZVD2016 is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53417
Data type Vector point
Feature count 3886
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Quasigeoid 2016

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12093
359
Updated
21 Jul 2016

This dataset was last updated on LINZ Data Service on 21 Jul 2016.

The relationship between the GRS80 ellipsoid and the New Zealand Vertical Datum 2016 (NZVD2016) is modelled by the New Zealand Quasigeoid 2016 (NZGeoid2016). The relationship value is represented by the attribute “N”, in metres.

This relationship and NZVD2016 is formally defined in the LINZ standard LINZS25009.

NZGeoid2016 can be used to convert New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights to NZVD2016 normal-orthometric heights.

The conversion value is represented by the attribute “N”, in metres.

NZGeoid2016 is published on a one arc-minute grid (approximately 1.8 kilometres) over the New Zealand continental shelf (160° E to 170° W, 25° S to 60° S).

NZGeoid2016 was calculated by enhancing the EIGEN-6C4 global gravity model with, terrestrial, ship-track, satellite and airborne gravity data. GPS-levelling observations were not used to compute NZGeoid2016.

Users may also be interested in transforming heights to any of the 13 historic local vertical datums used in New Zealand using the appropriate datum relationship grid displayed in the NZ Height Conversion Index.

More information on these transformations is available on the LINZ website.

Layer ID 53418
Data type Vector point
Feature count 3783901
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Moturiki 1953 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11099
161
Added
04 Aug 2016

This dataset was first added to LINZ Data Service on 04 Aug 2016.

The MOT53-NZVD2016 grid enables the conversion of normal-orthometric heights from the Moturiki 1953 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

MOT53-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Moturiki 1953 vertical datum (174.5° E to 178.26° E, 36.5° S to 40.7° S).

The height conversion grid models the difference between the Moturiki 1953 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of MOT53-NZVD2016 is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53448
Data type Vector point
Feature count 14364
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

One Tree Point 1964 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10738
45
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The OTP64-NZVD2016 grid enables the conversion of normal-orthometric heights from the One Tree Point 1964 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

OTP64-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the One Tree Point 1964 vertical datum (171.3° E to 174.4° E, 40.4° S to 42.7° S).

The height conversion grid models the difference between the One Tree Point 1964 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of OTP64-NZVD2016 is better than 1 centimetre (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53440
Data type Vector point
Feature count 5548
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Canterbury Earthquake Geodetic Marks (2010, 2011) - Simple

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10235
106
Added
26 Apr 2013

This dataset was first added to LINZ Data Service on 26 Apr 2013.

The Canterbury region of New Zealand experienced a sequence of significant earthquakes during 2010 and 2011. These earthquakes occurred on 2010-09-04, 2011-02-22, 2011-06-13 and 2011-12-23. The coordinates in this layer account for all significant movements relating to these, so should be consistent with any observations made after the last earthquake to affect a given area (neglecting localised deformation such as that due to liquefaction).

Users may also be interested in the more comprehensive data in the companion layer Canterbury Earthquake Geodetic Marks (2010, 2011) - Comprehensive.

These coordinates are only provisional. Analysis is ongoing as further data is collected. Coordinates were calculated using SNAP v2.3.61. Stations were constrained using coordinates calculated by GNS Science. Some coordinates were calculated from data provided by Christchurch City Council. No precise levelling data has been used.

The estimated accuracy is 0.02m horizontally and 0.03m vertically.

The deformation model igns2011_working.grd calculated from a model (v4) provided by GNS Science on 28 April 2011 was used to remove secular deformation.

These coordinates are suitable for use in surveys and other geospatial activities in Canterbury and Christchurch.

For further information about this dataset, see the Canterbury earthquake information on the LINZ website.

Layer ID 51589
Data type Vector point
Feature count 719
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZGD2000 deformation model version 2013-08-01 reverse patch coordinate shifts contours

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10052
55
Updated
14 Jun 2013

This dataset was last updated on LINZ Data Service on 14 Jun 2013.

The deformation model associated with the NZGD2000 datum was updated, nominally at 1 August 2013. The actual update of LINZ data took place on 14-15 December 2013. This update involved reverse patches, which means that the "reference coordinates" of features were updated. The main updates relate to the Christchurch earthquakes. The patch also updated coordinates affected by other South Island earthquakes since 2000.

These updates have been incorporated into Landonline and resulted in spatial updates to all features in the affected areas.

This data set contains contours indicating the extent and magnitude of the coordinate changes to assist in assessing the impact of this update on client data sets. This dataset is also available as a multipolygon.

For more information see here

Layer ID 51684
Data type Vector multilinestring
Feature count 7
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Canterbury Earthquake Survey Mark Movements

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9872
140
Added
12 Sep 2016

This dataset was first added to LINZ Data Service on 12 Sep 2016.

This layer details the movement of survey marks due to the Canterbury Earthquake Sequence (CES). The movements include the impact of 5 major earthquakes on 4 September 2010, 22 February 2011, 13 June 2011, 23 December 2011 and 14 February 2016.

Note that these movements apply only at the survey mark. Nearby land may have moved differently, especially in areas impacted by substantial shallow ground movement.

For further earthquake information, see the Canterbury earthquake information on the LINZ website.

Scope

Movements do not include the regular tectonic movement (not related to earthquakes) of approximately 5cm per year.

As well as Christchurch, the data covers Lyttelton, Spencerville, Kaiapoi, Pines Beach, Woodend, Pegasus and Waikuku Beach.

Mark Movement Calculations

Observed mark movements have been calculated from geodetic and cadastral survey data collected at the same physical survey mark before and after the earthquakes. Various filters have been applied to ensure as far as practicable that the movements reflect real-world earthquake-related movements of marks. For example, only non-boundary marks that have been directly measured (rather than adopted) are included.

Modelled mark movements have been calculated using models of the tectonic-scale movements resulting from each earthquake, supplied by GNS Science, supplemented with more detailed modelling carried out by LINZ. These models typically represent deep-seated movement only. They do not include shallow movement, such as that resulting from liquefaction.

Therefore the difference between the post-earthquake observed and post-earthquake modelled position generally represents shallow ground movement. The difference between the post-earthquake modelled and pre-earthquake observed position generally represents deep-seated movement. The difference between the post-earthquake observed position and pre-earthquake observed position represents total movement due to the earthquakes.

Accuracy

The uncertainty of the coordinate changes is 0.1m at a 95% confidence interval.

Layer Attributes

  • nod_id_post_eq: Landonline node id for the latest post-earthquake node (mark)
  • code_post_eq: Geodetic code for the latest post-earthquake node
  • name_post_eq: Mark name for the latest post-earthquake node
  • nod_id_pre_eq: Landonline node id for the pre-earthquake node (mark)
  • code_pre_eq: Geodetic code for the pre-earthquake node
  • name_pre_eq: Mark name for the pre-earthquake node
  • de_mod_obs: East change from modelled post-earthquake to observed post-earthquake position
  • dn_mod_obs: North change from modelled post-earthquake to observed post-earthquake position
  • hz_mod_obs: Horizontal change from modelled post-earthquake to observed post-earthquake position
  • bg_mod_obs: Bearing from modelled post-earthquake to observed post-earthquake position
  • de_pre_mod: East change from observed pre-earthquake to modelled post-earthquake position
  • dn_pre_mod: North change from observed pre-earthquake to modelled post-earthquake position
  • hz_pre_mod: Horizontal change from observed pre-earthquake to modelled post-earthquake position
  • bg_pre_mod: Bearing from observed pre-earthquake to modelled post-earthquake position
  • de_pre_obs: East change from observed pre-earthquake to observed post-earthquake position
  • dn_pre_obs: North change from observed pre-earthquake to observed post-earthquake position
  • hz_pre_obs: Horizontal change from observed pre-earthquake to observed post-earthquake position
  • bg_pre_obs: Bearing from observed pre-earthquake to observed post-earthquake position
Layer ID 53455
Data type Vector point
Feature count 8882
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 39