NZ Airborne Gravity Flight Lines at Elevation (2013-2014)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3862
50
Updated
30 Jan 2017

This dataset was last updated on LINZ Data Service on 30 Jan 2017.

Introduction
This dataset provides gravity observations, reductions and metadata for New Zealand’s national airborne gravity survey at flight elevation. A full description of each field in this dataset is available in the accompanying pdf NZ Airborne Gravity Flight Lines at Elevation (2013-2014) Description.

Description
New Zealand’s national airborne gravity dataset is comprised of more than 50,000 linear km of flight observations, covering the three main islands of New Zealand and up to 10km offshore.

Gravity observations can be used to compute gravity anomalies: differences between measured gravity and an ellipsoidal model of the Earth’s gravity field. Gravity anomalies correspond to un-modelled density variations within the Earth’s crust and upper mantle. They are used to investigate concealed geological structures and for quasigeoid modelling.

The national airborne gravity dataset was collected as a joint project between Land Information New Zealand (LINZ), GNS Science (GNS) and Victoria University of Wellington (VUW). The airborne survey was completed in a total of eight months, over two campaigns: August – October 2013, and February – June 2014.

Users may also be interested raster layers created for each of the free-Air and Bouguer Anomalies which have been downward continued to ground surface NZ Airborne Gravity Free-Air Anomalies at Ground Surface (2013-2014) and NZ Airborne Gravity Bouguer Anomalies at Ground Surface (2013-2014).

Layer ID 53531
Data type Vector point
Feature count 947685
Elevation Z (Ellipsoidal_Height)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Lyttelton 1937 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3896
97
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The LTN37-NZVD2016 grid enables the conversion of normal-orthometric heights from the Lyttelton 1937 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

LTN37-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Lyttelton 1937 vertical datum (168.53° E to 174.2° E, 41.3° S to 45.1° S).

The height conversion grid models the difference between the Lyttelton 1937 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of LTN37-NZVD2016 is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53432
Data type Vector point
Feature count 19665
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Auckland 1946 to NZGD2000 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3757
43
Updated
02 Aug 2016

This dataset was last updated on LINZ Data Service on 02 Aug 2016.

The AUK46-NZGD2000 grid enables the conversion of normal-orthometric heights from the Auckland 1946 local vertical datum directly to New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights.

AUK46-NZGD2000 is published on a one arc-minute grid (approximately 1.8 kilometres) extending over the benchmarks that nominally define the extent of the Auckland 1946 vertical datum (174.0° E to 176.2° E, 36.1° S to 38.0° S).

The conversion value is represented by the attribute “delta”, in metres.

This grid is a combination of New Zealand Quasigeoid 2016 NZGeoid2016 and the AUK46-NZVD2016 height conversion grid. Where NZGeoid2016 is the reference surface for the New Zealand Vertical Datum 2016 (NZVD2016), while the AUK46-NZVD2016 grid models the difference between the Auckland 1946 vertical datum and NZVD2016 using the LINZ GPS-levelling marks.

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53416
Data type Vector point
Feature count 15295
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Nelson 1955 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3709
69
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The NSN55-NZVD2016 grid enables the conversion of normal-orthometric heights from the Nelson 1955 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

NSN55-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Nelson 1955 vertical datum (171.3° E to 174.4° E, 40.4° S to 42.7° S).

The height conversion grid models the difference between the Nelson 1955 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of NSN55-NZVD2016 is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53438
Data type Vector point
Feature count 6580
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Canterbury - Hawarden LiDAR Index Tiles (2015)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3683
43
Added
17 Mar 2017

This dataset was first added to LINZ Data Service on 17 Mar 2017.

This layer contains the index tiles for LiDAR data from the Hawarden area captured in 2015.
The DEM is available as layer Canterbury - Hawarden LiDAR 1m DEM (2015).
The DSM is available as layer Canterbury - Hawarden LiDAR 1m DSM (2015).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by Aerial Surveys on 1 April 2015, under survey name Hurunui. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Hawarden township area. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is 1.3 pulses/square metre.

Vertical accuracy specification is per the ICSM LiDAR Acquisition Specifications and Tender Template NZ Version March 2011.

Vertical datum is NZVD2016.

Layer ID 53584
Data type Vector polygon
Feature count 224
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Lyttelton 1937 to NZGD2000 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3666
36
Updated
02 Aug 2016

This dataset was last updated on LINZ Data Service on 02 Aug 2016.

The LTN37-NZGD2000 grid enables the conversion of normal-orthometric heights from the Lyttelton 1937 local vertical datum directly to New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights.

LTN37-NZGD2000 is published on a one arc-minute grid (approximately 1.8 kilometres) extending over the benchmarks that nominally define the extent of the Lyttelton 1937 vertical datum (168.53° E to 174.2° E, 41.3° S to 45.1° S).

The conversion value is represented by the attribute “delta”, in metres.

This grid is a combination of New Zealand Quasigeoid 2016 NZGeoid2016 and the LTN37-NZVD2016 height conversion grid. Where NZGeoid2016 is the reference surface for the New Zealand Vertical Datum 2016 (NZVD2016), while the LTN37-NZVD2016 grid models the difference between the Lyttelton 1937 vertical datum and NZVD2016 using the LINZ GPS-levelling marks.

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53431
Data type Vector point
Feature count 78547
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Wellington 1953 to NZGD2000 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3639
43
Updated
09 Aug 2016

This dataset was last updated on LINZ Data Service on 09 Aug 2016.

The WGN53-NZGD2000 grid enables the conversion of normal-orthometric heights from the Wellington 1953local vertical datum directly to New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights.

WGN53-NZGD2000 is published on a one arc-minute grid (approximately 1.8 kilometres) extending over the benchmarks that nominally define the extent of the Wellington 1953 vertical datum (174.4° E to 176.4° E, 39.1° S to 41.6° S).

The conversion value is represented by the attribute “delta”, in metres.

This grid is a combination of New Zealand Quasigeoid 2016 NZGeoid2016 and the WGN53-NZVD2016 height conversion grid. Where NZGeoid2016 is the reference surface for the New Zealand Vertical Datum 2016 (NZVD2016), while the WGN53-NZVD2016 grid models the difference between the Wellington 1953 vertical datum and NZVD2016 using the LINZ GPS-levelling marks.

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53445
Data type Vector point
Feature count 18271
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Wellington 1953 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3621
61
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The WGN53-NZVD2016 grid enables the conversion of normal-orthometric heights from the Wellington 1953 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

WGN53-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Wellington 1953 vertical datum (174.4° E to 176.4° E, 39.1° S to 41.6° S).

The height conversion grid models the difference between the Wellington 1953 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of WGN53-NZVD2016 is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53446
Data type Vector point
Feature count 4636
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Gisborne 1926 to NZGD2000 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3502
19
Updated
02 Aug 2016

This dataset was last updated on LINZ Data Service on 02 Aug 2016.

The GSB26-NZGD2000 grid enables the conversion of normal-orthometric heights from the Gisborne 1926 local vertical datum directly to New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights.

GSB26-NZGD2000 is published on a one arc-minute grid (approximately 1.8 kilometres) extending over the benchmarks that nominally define the extent of the Gisborne 1926 vertical datum (177.0° E to 178.6° E, 37.4° S to 39.0° S).

The conversion value is represented by the attribute “delta”, in metres.

This grid is a combination of New Zealand Quasigeoid 2016 NZGeoid2016 and the GSB26-NZVD2016 height conversion grid. Where NZGeoid2016 is the reference surface for the New Zealand Vertical Datum 2016 (NZVD2016), while the GSB26-NZVD2016 grid models the difference between the Gisborne 1926 vertical datum and NZVD2016 using the LINZ GPS-levelling marks.

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53429
Data type Vector point
Feature count 9409
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Bluff 1955 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3636
16
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The BLF55-NZVD2016 grid enables the conversion of normal-orthometric heights from the Bluff 1955 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

BLF55-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Bluff 1955 vertical datum (168.2° E to 168.9° E, 46.3° S to 46.8° S).

The height conversion grid models the difference between the Bluff 1955 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of BLF55-NZVD2016 is better than 3 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53424
Data type Vector point
Feature count 352
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 31 to 40 of 79