Antarctic Geodetic Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4950
69
Updated
25 Jan 2020

This dataset was last updated on LINZ Data Service on 25 Jan 2020.

This dataset provides information about the position, position accuracy, mark name, mark type, condition and unique four letter code for geodetic marks in terms of New Zealand's official geodetic datum for the Ross Dependency.

This dataset only includes marks that are within Antarctica. These positions have been generated using geodetic observations such as precise differential GPS or electronic distance and theodolite angles measurements. The positions are either 2D or 3D depending of the availability of this measurement data.

The source data is from Land Information New Zealand's (LINZ) Landonline system where it is used by Land Surveyors. This dataset is updated daily to reflect changes made in the Landonline.

Accuracy

Geodetic marks with a coordinate order of 5 or less have been positioned in terms of Ross Sea Region Geodetic Datum 2000 (RSRGD2000) using precise differential GPS techniques. Marks with order 6 have been positioned in terms of RSRGD2000 using precise horizontal angles and distance measurements. Lower order marks (order 7 and greater) are derived from lower accuracy measurement techniques or historical datum transformations, and may be significantly less accurate.

The accuracy of RSRGD2000 coordinates is described by a series of 'orders' classifications. Positions in terms of RSRGD2000 are described by three-dimensional coordinates (latitude, longitude, ellipsoidal height). The accuracy of a survey mark is indicated by its order. Orders are classifications based on the quality of the coordinate in relation to the datum and in relation to other surrounding marks. For more information see www.linz.govt.nz/geodetic/datums-projections-heigh...

Note that the accuracy applies at the time the mark was last surveyed. Refer to the web geodetic database for historical information about mark coordinates.

Note also that the existence of a mark in this dataset does not imply that there is currently a physical mark in the ground - the dataset includes destroyed or lost historical marks. The geodetic database provides more information on the mark status, valid at last time it was visited by LINZ.

Layer ID 50789
Data type Vector point
Feature count 468
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Antarctic Geodetic Vertical Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4580
48
Updated
25 Jan 2020

This dataset was last updated on LINZ Data Service on 25 Jan 2020.

This dataset provides information about the position, height, height datum, height accuracy, mark name, mark type, condition and unique four letter identifier for geodetic marks that have an authoritative height in terms of a vertical datum.
Heights are in datums defined at www.linz.govt.nz/geodetic/datums-projections-heigh....

All marks will have positions in terms of New Zealand’s official geodetic datum for Antarctica, Ross Sea Region Geodetic Datum 2000 (RSRGD2000). The horizontal positions of marks are provided for approximate location purposes only.

This dataset only includes marks that are within the Antarctic region. The height data for these marks have been generated primarily using precise vertical angle and slope distance measurements from datum tide gauges. Some have been generated from levelling data.

The source data is from Land Information New Zealand's (LINZ) Landonline system where it is used by Land Surveyors. This dataset is updated daily to reflect changes made in the Landonline.

Accuracy

The accuracy of normal-orthometric heights are described by height orders.

For more information see www.linz.govt.nz/geodetic/datums-projections-heigh....

Note the accuracy applies at the time the mark was last surveyed - see the geodetic database for historical information about height coordinates.

Layer ID 50788
Data type Vector point
Feature count 279
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Antarctic Scanned Sounding Sheet Index

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4076
16
Updated
21 Jul 2016

This dataset was last updated on LINZ Data Service on 21 Jul 2016.

This index enables you to identify the freely available georeferenced TIFF images of sounding sheets held by LINZ for the Antarctic (Ross Dependency) coastal area. Some of these sounding sheets date back to the 1950s. The polygons comprising the index show the extent of each original hard copy sheet - not just the soundings shown on the sheet. The attributes attached to each polygon will enable you to view, amongst other attributes, the date and scale of the bathymetric data shown on the sounding sheet.

Please refer to the LINZ Bathymetric Index Data Dictionary for further information about the attributes of this dataset.

The georeferenced TIFF images are not downloadable from the LINZ Data Service.

Requests for sounding sheets should be sent to customersupport@linz.govt.nz with "Hydro Bathy Data" in the subject line. Requests must, as a minimum, specify the id, chart_no and serial_no as shown in the attributes attached to each polygon representing the sounding sheets of interest.

Layer ID 53410
Data type Vector polygon
Feature count 71
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Auckland 1946 to NZGD2000 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4457
43
Updated
02 Aug 2016

This dataset was last updated on LINZ Data Service on 02 Aug 2016.

The AUK46-NZGD2000 grid enables the conversion of normal-orthometric heights from the Auckland 1946 local vertical datum directly to New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights.

AUK46-NZGD2000 is published on a one arc-minute grid (approximately 1.8 kilometres) extending over the benchmarks that nominally define the extent of the Auckland 1946 vertical datum (174.0° E to 176.2° E, 36.1° S to 38.0° S).

The conversion value is represented by the attribute “delta”, in metres.

This grid is a combination of New Zealand Quasigeoid 2016 NZGeoid2016 and the AUK46-NZVD2016 height conversion grid. Where NZGeoid2016 is the reference surface for the New Zealand Vertical Datum 2016 (NZVD2016), while the AUK46-NZVD2016 grid models the difference between the Auckland 1946 vertical datum and NZVD2016 using the LINZ GPS-levelling marks.

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53416
Data type Vector point
Feature count 15295
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Auckland 1946 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6830
146
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The AUK46-NZVD2016 grid enables the conversion of normal-orthometric heights from the Auckland 1946 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

AUK46-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Auckland 1946 vertical datum (174.0° E to 176.2° E, 36.1° S to 38.0° S).

The height conversion grid models the difference between the Auckland 1946 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of AUK46-NZVD2016 is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53417
Data type Vector point
Feature count 3886
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Auckland LiDAR 1m DEM (2013)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

38249
6580
Updated
13 Jun 2016

This dataset was last updated on LINZ Data Service on 13 Jun 2016.

This layer contains the DEM for LiDAR data from the Auckland region captured in 2013.
The DSM is available as layer Auckland Lidar 1m DSM (2013).
The index tiles are available as layer Auckland Lidar Index Tiles (2013).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Auckland Council by NZ Aerial Mapping & Aerial Surveying Limited. The capture of the data commenced on 17th July and was completed by the 23 November 2013. The datasets were generated by both ASL and NZAM. All raw point cloud data was produced by NZAM & ASL prior to data being sent to Genesys International for the data classification and product generation. The survey area includes the Auckland city urban area and adjacent rural land covering approximately 2250 square kilometers. Data management and distribution external to Auckland Council is managed by Land Information New Zealand.

Data comprises:
•DEM: 6423 asc files in NZTM projection, tiled into a 1:1,000 tile layout
•DSM: 6423 asc files in NZTM projection, tiled into a 1:1,000 tile layout
•Point cloud: 8224 las files in NZTM projection, tiled into a 1:1,000 tile layout

Data was collected at > 1.5 point/square metre point density. Attributes include:
-Elevation
-Intensity values
-Return number
-Adjusted GPS time
-Classification

Vertical accuracy specification is +/-0.2m (@ 95% confidence)
Horizontal accuracy specification is +/-0.6m (@ 95% confidence)

Verical Datum is NZVD2009

Layer ID 53405
Data type Grid
Resolution 1.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Auckland LiDAR 1m DSM (2013)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

14013
1228
Updated
14 Jun 2016

This dataset was last updated on LINZ Data Service on 14 Jun 2016.

This layer contains the DSM for LiDAR data from the Auckland region captured in 2013.
The DEM is available as layer Auckland Lidar 1m DEM (2013).
The index tiles are available as layer Auckland Lidar Index Tiles (2013).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Auckland Council by NZ Aerial Mapping & Aerial Surveying Limited. The capture of the data commenced on 17th July and was completed by the 23 November 2013. The datasets were generated by both ASL and NZAM. All raw point cloud data was produced by NZAM & ASL prior to data being sent to Genesys International for the data classification and product generation. The survey area includes the Auckland city urban area and adjacent rural land covering approximately 2250 square kilometers. Data management and distribution external to Auckland Council is managed by Land Information New Zealand.

Data comprises:
•DEM: 6423 asc files in NZTM projection, tiled into a 1:1,000 tile layout
•DSM: 6423 asc files in NZTM projection, tiled into a 1:1,000 tile layout
•Point cloud: 8224 las files in NZTM projection, tiled into a 1:1,000 tile layout

Data was collected at > 1.5 point/square metre point density. Attributes include:
-Elevation
-Intensity values
-Return number
-Adjusted GPS time
-Classification

Vertical accuracy specification is +/-0.2m (@ 95% confidence)
Horizontal accuracy specification is +/-0.6m (@ 95% confidence)

Verical Datum is NZVD2009

Layer ID 53406
Data type Grid
Resolution 1.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Auckland LiDAR Index Tiles (2013)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10180
422
Updated
23 Jun 2016

This dataset was last updated on LINZ Data Service on 23 Jun 2016.

This layer contains the index tiles for LiDAR data from the Auckland region captured in 2013.
The DEM is available as layer Auckland Lidar 1m DEM (2013).
The DSM is available as layer Auckland Lidar 1m DSM (2013).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Auckland Council by NZ Aerial Mapping & Aerial Surveying Limited. The capture of the data commenced on 17th July and was completed by the 23 November 2013. The datasets were generated by both ASL and NZAM. All raw point cloud data was produced by NZAM & ASL prior to data being sent to Genesys International for the data classification and product generation. The survey area includes the Auckland city urban area and adjacent rural land covering approximately 2250 square kilometers. Data management and distribution external to Auckland Council is managed by Land Information New Zealand.

Data comprises:
•DEM: 6423 asc files in NZTM projection, tiled into a 1:1,000 tile layout
•DSM: 6423 asc files in NZTM projection, tiled into a 1:1,000 tile layout
•Point cloud: 8224 las files in NZTM projection, tiled into a 1:1,000 tile layout

Data was collected at > 1.5 point/square metre point density. Attributes include:
-Elevation
-Intensity values
-Return number
-Adjusted GPS time
-Classification

Vertical accuracy specification is +/-0.2m (@ 95% confidence)
Horizontal accuracy specification is +/-0.6m (@ 95% confidence)

Vertical Datum is NZVD2009

Layer ID 53407
Data type Vector polygon
Feature count 6511
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Auckland South LiDAR 1m DEM (2016)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

326
4
Added
16 Dec 2019

This dataset was first added to LINZ Data Service on 16 Dec 2019.

This layer contains the DEM for LiDAR data in the southern Auckland Region captured between 2016 and 2017.

LiDAR was captured for Auckland Council by AAM New Zealand between September 2016 to June 2017. These datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

  • DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

  • DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

  • Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 4 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%).

Horizontal Accuracy Specification is +/- 0.6m (95%).

Vertical datum is NZVD2016

Layer ID 104318
Data type Grid
Resolution 1.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Auckland South LiDAR 1m DSM (2016)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

165
1
Added
18 Dec 2019

This dataset was first added to LINZ Data Service on 18 Dec 2019.

This layer contains the DSM for LiDAR data in the southern Auckland Region captured between 2016 and 2017.

LiDAR was captured for Auckland Council by AAM New Zealand between September 2016 to June 2017. These datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

  • DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

  • DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

  • Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 4 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%).

Horizontal Accuracy Specification is +/- 0.6m (95%).

Vertical datum is NZVD2016

Layer ID 104382
Data type Grid
Resolution 1.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed
Results 31 to 40 of 1742