Landonline: Street Address (Deprecated)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1
24007
1864
Updated
01 Jul 2017

This dataset was last updated on LINZ Data Service on 01 Jul 2017.

As of June 2017, this dataset has been replaced by the AIMS: Street Address Set and will no longer be updated. See Street Address Data Dictionary for field mappings to the new dataset.


Please read: This layer is part of the comprehensive Full Landonline Dataset and is designed for use only by data professionals who require the complex version of our property ownership and boundary data for advanced uses. For a simplified version of data contained within this table see the road datasets in the Electoral Group.


This layer contains Street Addresses recorded for electoral purposes. Flat numbers using the same "principal address" are usually omitted. Each address has been geocoded in a position that best suits its display within Landonline.

Please refer to the LDS Full Landonline Data Dictionary and Models for detailed metadata about this layer.

Layer ID 52054
Data type Vector point
Feature count 1993687
Primary key id
Services Vector Query API, Web Feature Service (WFS)

NZ Protected Survey Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

24294
1558
Updated
25 Jan 2020

This dataset was last updated on LINZ Data Service on 25 Jan 2020.

This layer identifies critical survey marks which LINZ requires to be physically protected.

Thousands of vital survey marks exist in New Zealand. Many of them are below or at ground level and not noticed by most of us.

People involved in construction work are responsible for making sure survey marks are not damaged. When building works have the potential to destroy existing cadastral and geodetic marks, LINZ needs to be notified so that it can assess whether the marks should be reinstated or replaced. Find out more about looking after the national survey network

Please note there may be other important survey marks not identified on this layer, and that LINZ recommends consultation with a Licensed Cadastral surveyor before any construction or earthworks begin.

If you notice a damaged survey mark, you can report it to LINZ by filling out a form on this website

Layer ID 50839
Data type Vector point
Feature count 201369
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Landonline: Parcel

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

22055
3354
Updated
24 Jan 2020

This dataset was last updated on LINZ Data Service on 24 Jan 2020.

Please read: This layer is part of the comprehensive Full Landonline Dataset and is designed for use only by data professionals who require the complex version of our property ownership and boundary data for advanced uses. For a simplified version of data contained within this layer see our property ownership and boundary data.


A Parcel is a polygon or polyhedron consisting of boundary lines (Features which are boundary features) which may be, or may be capable of being defined by survey, and includes the parcel area and appellation. Polyhedrons are required in order to define stratum estates and easements.

For full Parcel data, see the Landonline: Parcel Linestring layer.

Please refer to the LDS Full Landonline Data Dictionary and Models for detailed metadata about this layer.

Layer ID 51976
Data type Vector multipolygon
Feature count 4597623 (incl. 1071838 with empty or null geometries)
Primary key id
Services Vector Query API, Web Feature Service (WFS)

NZ Contours (Topo, 1:500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

23075
1869
Added
22 May 2011

This dataset was first added to LINZ Data Service on 22 May 2011.

An imaginary line that connects points of equal height value eg the elevation of the land surface above or below a vertical datum, in this case of LINZ topographic mapping, this is Mean Sea Level.

Data Dictionary for contour: apps.linz.govt.nz/topo-data-dictionary/index.aspx?... . The first contour is the 160m, then 300m, and every 300m thereafter.

This layer is a component of the Topo500 data. The Topo500 map series will, when it is created, provide updated topographic mapping for the New Zealand mainland at 1:500,000 scale.

Layer ID 50205
Data type Vector linestring
Feature count 17382
Elevation Z (elevation)
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Chart NZ 615 Marlborough Sounds

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

23359
845
Updated
05 Jul 2019

This dataset was last updated on LINZ Data Service on 05 Jul 2019.

Raster chart image of: NZ 615 Marlborough Sounds

This data was compiled for the use at the following scale: 1:100000

File reference: NZ61501.tif

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

Layer ID 51284
Data type Image/Raster
Resolution About 4.237m
Services Web Map Service (WMS), Catalog Service (CS-W), data.govt.nz Atom Feed

South Island Pastoral Leases

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

22916
1147
Updated
26 Jan 2020

This dataset was last updated on LINZ Data Service on 26 Jan 2020.

This layer includes the current South Island pastoral leases as at the layer's latest revision date. It excludes pastoral leases that have completed Tenure Review, endowment land, special leases, pastoral occupation licences, pastoral vacant land and special leases.
Lease boundaries have been derived from graphical cadastral line work held in LandOnline which in many cases was itself derived from the Lands and Survey Department's hard copy record sheets. The boundaries of many of these original Run Plans, on which these leases were based, were obtained from early Run Plans, circa 1860. As such please note that THE BOUNDARIES ARE INDICATIVE ONLY.
More information on Pastoral Leases can be found under the Crown Pastoral Land section on the LINZ website

Layer ID 51572
Data type Vector multipolygon
Feature count 181
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Chart NZ 532 Approaches to Auckland

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

22580
1062
Updated
05 Jul 2019

This dataset was last updated on LINZ Data Service on 05 Jul 2019.

Raster chart image of: NZ 532 Approaches to Auckland

This data was compiled for the use at the following scale: 1:100000

File reference: NZ53201.tif

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

Layer ID 51277
Data type Image/Raster
Resolution About 4.206m
Services Web Map Service (WMS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Roads (Addressing)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1
19629
3576
Updated
24 Jan 2020

This dataset was last updated on LINZ Data Service on 24 Jan 2020.

Please read: This layer provides linear geometries against which official road names and street addresses can be recorded. Its purpose is also to enable automated meshblock address reports (for electoral and statistical purposes) so as to identify the presence of a road name in meshblocks where street addresses do not exist.

For this layer (as opposed to the NZ Roads Subsections (Addressing) layer, individual road section geometries have been aggregated to a single road centreline geometry where those subsections share the same name, and are generally contiguous. Because some roads have multiple names for part of their lengths, some road centreline geometries will duplicate parts of other roads even though there is in reality only one road formation. This layer has been simplified from LINZ’s NZ Roads dataset, a centralised database for the management of national road data. The comprehensive set of NZ Roads tables is also available.

These road centrelines do not represent actual road formation, nor do they represent legal access. They must not be considered as topographic, cadastral, or legal.

This layer contains the core attributes of a road to support simple searching or provide a road name context for cadastral data views. This dataset is a replacement for the NZ Road Centre Line (Electoral) dataset.

The Electoral road and address datasets will be available until May 2017 to allow users further time to transition.

Please refer to the NZ Roads Data Dictionary for detailed metadata and information about this layer.

Layer ID 53382
Data type Vector multilinestring
Feature count 77159
Primary key road_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Geodetic Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

19250
3894
Updated
25 Jan 2020

This dataset was last updated on LINZ Data Service on 25 Jan 2020.

This dataset provides information about the position, position accuracy, mark name, mark type, condition and unique four letter code for geodetic marks in terms of a New Zealand's official geodetic datum.

The dataset only contains marks that are within the New Zealand mainland and offshore islands. These positions have been generated using geodetic observations such as precise differential GPS or electronic distance and theodolite angles measurements. The positions are either 2D or 3D depending of the availability of this measurement data.

The source data is from Land Information New Zealand's (LINZ) Landonline system where it is used by Land Surveyors. This dataset is updated daily to reflect changes made in the Landonline.

Accuracy

Geodetic marks with a coordinate order of 5 or less have been positioned in terms of NZGD2000. Lower order marks (order 6 and greater) are derived from cadastral surveys, lower accuracy measurement techniques or inaccurate historical datum transformations, and may be significantly less accurate.

The accuracy of NZGD2000 coordinates is described by a series of 'orders' classifications. Positions in terms of NZGD2000 are described by three-dimensional coordinates (latitude, longitude, ellipsoidal height). The accuracy of a survey mark is indicated by its Order. Orders are classifications based on the quality of the coordinate in relation to the datum and in relation to other surrounding marks. For more information see www.linz.govt.nz/geodetic/datums-projections-heigh...

Note that the accuracy applies at the time the mark was last surveyed. Refer to the web geodetic database for historical information about mark coordinates.

Note also that the existence of a mark in this dataset does not imply that there is currently a physical mark in the ground - the dataset includes destroyed or lost historical marks. The geodetic database provides more information on the mark status, valid at last time it was visited by LINZ or a maintenance contractor.

Layer ID 50787
Data type Vector point
Feature count 129855
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Linz Map Sheets (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

20670
2393
Updated
21 Oct 2019

This dataset was last updated on LINZ Data Service on 21 Oct 2019.

Polygon for each Topo50 map sheet holding extents of each sheet, it's sheet code, name, edition, and revision statement. This is the same information that is printed on each Topo50 map

Data Dictionary for linz_map_sheet: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50295
Data type Vector polygon
Feature count 445
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 41 to 50 of 1742