Tagged: New Zealand in World - Page 9

A raised way across low or wet ground or water.

S-57 Object Class: Causeway

S-57 Acronym: CAUSWY

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A large mobile wave-like sediment feature in shallow water and composed of sand. The wavelength may reach 100 metres, the amplitude may be up to 20 metres.

S-57 Object Class: Sand waves

S-57 Acronym: SNDWAV

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A defined (and possibly named) administrative area.

S-57 Object Class: Administration Area (Named)

S-57 Acronym: ADMARE

This data was compiled for the use in the scale range 1:350,000 to 1:1,500,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A specified area designated by an appropriate authority within which navigation is restricted in accordance with certain specified conditions.

S-57 Object Class: Restricted area

S-57 Acronym: RESARE

This data was compiled for the use in the scale range 1:1,500,000 and smaller.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A defined (and possibly named) administrative area.

S-57 Object Class: Administration Area (Named)

S-57 Acronym: ADMARE

This data was compiled for the use in the scale range 1:1,500,000 and smaller.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

This layer contains the DEM for LiDAR data from the Otago Region captured in 2016.

• The DSM is available as layer Otago LiDAR 1m DSM (2016).

• The index tiles are available as layer Otago LiDAR Index Tiles (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Otago Regional Council by Aerial Surveys in March and April 2016. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 2 pulses/square metre.

Refer to individual survey reports for accuracy statistics.

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data from the Mackenzie Region, Canterbury captured in 2015.

• The DEM is available as layer Canterbury - Mackenzie LiDAR 1m DEM (2015).

• The index tiles are available as layer Canterbury - Mackenzie LiDAR Index Tiles (2015).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Genesis Energy Limited by Aerial Surveys Limited in Feb 2015. The original dataset was generated by Aerial Surveys and their subcontractors. This reprocessed dataset was supplied by Aerial Surveys to Land Information New Zealand, and includes a large area (peripheral data from the original survey). The survey area is in the Mackenzie District of Canterbury, between Lake Tekapo, Lake Pukaki, Lake Ohau and Lake Ruataniwha. This area also includes Twizel Township. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is 1 pulse/square metre.

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data from the Queenstown Area of the Otago Region captured in 2016.

• The DEM is available as layer Otago - Queenstown LiDAR 1m DEM (2016).

• The DSM is available as layer Otago - Queenstown LiDAR 1m DSM (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Otago Regional Council by Aerial Surveys in March and April 2016. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.044m (95%).

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data from the Queenstown Area in the Otago Region captured in 2016.

• The DEM is available as layer Otago - Queenstown LiDAR 1m DEM (2016).

• The index tiles are available as layer Otago - Queenstown LiDAR Index Tiles (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Otago Regional Council by Aerial Surveys in March and April 2016. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.044m (95%).

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from the Queenstown Area of the Otago District captured in 2016.

• The DSM is available as layer Otago - Queenstown LiDAR 1m DSM (2016).

• The index tiles are available as layer Otago - Queenstown LiDAR Index Tiles (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Otago Regional Council by Aerial Surveys in March and April 2016. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.044m (95%).

Vertical datum is NZVD2016.